4Runner 4th Gen (2003-2009)

Showing 61–90 of 143 results

Sale!
4Runner 4th Gen (2003-2009)
RCI is on Sale For Spring!!
RCI Full GX470 Skid Plate Set | 2003-2009 4Runner & GX470
- Suits 4th Gen 4Runners and non-KDSS Lexus GX470 V8 Models
- Includes front, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- All transmission skid plates now come standard with center gussets, a feature exclusive to RCI. Due to the location of the transmission skid plate and spanning a two foot gap, skid plates in this area are prone to getting bent. With this plate that is no longer the case!
- ALL Transfer-case cross-members come standard with black powdercoat finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
- Made to order based on the selections made below
Original price was: $890.00.Current price is: $801.00. Select options
Replacement Bushings
Dobinsons Upper Strut Bushing Kit – For -222 -221 -220 -574 -700
- Dobinsons replacement upper strut bushing kit with washers
- Suits a variety of Dobinsons struts, part numbers ending in -222 -221 -220 -574 -700
- Full list of part numbers this fits is below
- This is for 2 upper bushings and washers only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes
$20.00 Add to cart
Caster and Alignment
Ships FREE !!
within 48 US States
Heavy Duty Adjustable Toyota Front Sway Bar Links | Tacoma 4Runner FJ GX470 GX460
- Suits 2005-23 Tacoma, 2003-24 4Runner, GX470 and GX460 and FJ Cruiser (will not suit any KDSS models)
- Factory sway bar links are prone to bending and breaking and can even puncture your CV boots
- All-Pro’s heavy-duty sway bar links replace the weak stock links
- Uses Top quality Teflon lined 3/4″ Heim Joints
- Made from Hefty .156 wall DOM tubing
- Adjustable length to set sway bar angle correctly
- You can lubricate the heims once a month to help them last longer and prevent rust with a silicone spray such as PB Blaster or
  WD 40
- Installation Instructions
$265.00 Add to cart
4Runner 3rd Gen (1996-2002)
Performance Front Brake Lines for Toyota 4Runner 1996-2024 (RED)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- Increase your brake pedal feel with stainless brake lines to replace the factory rubber brake lines
- Stock length, works with or without a suspension lift
- Suits the following vehicles: Toyota 4Runner 3rd Gen 1996-2002, Toyota 4Runner 4th Gen 2003-2009, Toyota 4Runner 5th Gen 2010-2024
- Sold as a pair with new retaining clips
- Photo for illustration purposes only
- This set is RED in color
$95.00 Add to cart
Dirt King Fabrication
Dirt King Toyota UCA Ball Joint Caps
These ball joint caps seal the Dirt King ball joint cups from the elements. The caps are machined from 6061 aluminum, have an anodized finish, and utilize o-rings for a snug press fit. Price includes two caps with your choice of red or black.

Compatibility :
2005-2023 Tacoma Ball Joint UCAs
2003-2024 4Runner Ball Joint UCAs
2007-2016 FJ Cruiser Ball Joint UCAs
2007-2021 Tundra Ball Joint UCAs
- Can only be used if you’ve purchased Dirt King ball joint UCA’s!!
$59.00 Select options
All Pro Offroad
Ships FREE !!
within 48 US States
All Pro Complete CV Boot Kit | 03-09 4Runner FJ Cruiser GX470
- Complete CV boot replacement kit – Suits 2003-2009 4Runner, 2006-2009 FJ Cruiser, 2003-2009 Lexus GX470
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
$155.00 Add to cart
Sale!
Skid Plates
RCI is on Sale For Spring!!
Rear Shock Mount Skids | 2010-2024 4Runner FJ Cruiser GX460
- Includes one pair of rear shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on all 2010-2024 4Runner, FJ Cruiser and Lexus GX460 models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made in USA
Original price was: $115.00.Current price is: $103.50. Add to cart
Coil Springs - 4th Gen 4Runner
Dobinsons Rear Coil Spring Options for Toyota 4th Gen 4Runner 2003-2009
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- C59-323 – Stock height up to 1/2″ lift
- C59-599 – 3/4-1″ with stock weight
- C59-505 – 1.25-1.5″ with stock weight
- C59-325 – 1.75-2″ with stock weight
- C59-327 – 2″ with 200-400lbs weight
- C59-329 – 2″ with 500-800lbs weight
- C59-331 – 2″ with 800-1200lbs weight (TEAL ONLY)
- C59-675V – 2.5″ long travel, stock weight
- C59-677V – 3″ long travel with stock weight, 2.5″ with 200-400lbs weight
- C59-701V – 3″ long travel, 300-600lbs weight
- C59-749V – 3″ long travel, 800-1000LBS super extra heavy
- C59-849V – 3″ long travel, 1000LBS+ constant rear load (TEAL ONLY)
- Coil specs are down below
From $270.00 Select options
Replacement Bushings
Dobinsons Lower Strut Bushing – For -222 -220 -221 -782 -470
- Dobinsons replacement lower strut bushing
- Suits a variety of Dobinsons struts/shocks, part numbers ending in -222 -220 -221 -782 -470
- Full list of part numbers this fits is below
- This is for a single bushing only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes of the bushing type
$20.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons MRA Lift Kit for Toyota 4Runner 4×4 2003-2009 (0-3.5″)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Price Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Standard Coil Springs
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- Common installation instructions
From $2,700.00 Select options
Dirt King Fabrication
Dirt King Performance Diff Drop Kit for Toyota and Lexus
- Complete Diff Drop Kit
- Lowers front diff by 1.0″
- Reduces CV angles on lifted trucks
- Reduces wear on CV boots
- Includes spacers and longer bolts for skid plate re-installation
- Made in the USA
$49.00 Add to cart
Sale!
Skid Plates
RCI is on Sale For Spring!!
Rear Arm Skids | 2003+ 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460 (all years)
- Protects rear lower links
- Smooth, flat surface that easily slides over obstacles
- Black powder coat included for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Design requires drilling two holes to secure front edge to vehicle frame, making a solid attachment point that will never let you down
- Includes heavy duty replacement bolt for lower link
- Kit includes both driver and passenger side lower link skids
- Made in USA
Original price was: $134.00.Current price is: $120.60. Add to cart
Full Suspension Kits - 4th Gen 4runner
Dobinsons 1-3.5″ Pre-Assembled IMS Coilovers for Toyota 4Runner 4th Gen
- Suits 2003-2009 Toyota 4Runner 4th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
$1,165.00 Select options
4Runner 4th Gen (2003-2009)
Dobinsons C59-331 Rear Coils | 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 410mm, 19mm wire, 349LB Rate
$270.00 Add to cart
On Backorder
Full Suspension Kits - 4th Gen 4runner
Ships FREE !!
within 48 US States
ETA is Summer 2024
Dobinsons 1-3.5″ Pre-Assembled MRA Coilovers for Toyota 4Runner 4th Gen
- Suits 2003-2009 Toyota 4Runner 4th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
$1,795.00 Select options
Replacement Bushings
Dobinsons Lower Shock Bushing – For -701 -705 -575
- Dobinsons replacement lower shock bushing
- Suits a variety of Dobinsons shocks, part numbers ending in -701 -705 -575
- Full list of part numbers this fits is below
- This is for a single bushing only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes of the bushing type
$20.00 Add to cart
Airbag Kits
Air Lift 60769 Air Spring Kit Rear Helper Airbags for 2-3″ of Lift
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 WITH 2-3″ of Lift
- These are an alternate to Firestone 4108
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Ships from multiple warehouses across the country for faster shipping times
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
$148.00 Add to cart
Skid Plates
ARB 5421100 Skid Plate Kit | Toyota 4Runner 4th Gen
- Suits all Toyota 4Runner 4th Gen models from 2003 to 2009. Also fits 5th Gen 4runners without KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
$520.00 Add to cart
Dobinsons
Dobinsons C59-849V 3.0″ Lift w/1000LBS+ Constant Load Coil Springs | 4Runner GX460
- Suits 2003-2024 Toyota 4Runner and 2010-2023 Lexus GX460 – Lifts 3.0″ with a minimum of 1000LBS of added rear constant weight (bumper, drawers, fridge, RTT, etc)
- Heaviest Long Travel and Variable Rate coils available worldwide for Toyota and Lexus SUV’s
- These are not for you if you don’t have at least 1000LBS of rear constant weight bolted to the back end of your SUV at all times!!!
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal Color ONLY
- Sold in Pairs
- Important: Read first line below in description before proceeding!!!
- 500mm free height, 19mm wire, variable rate 314-371 LBF/in at ride height/loaded
$405.00 Add to cart
Sale!
GX460 (2010-2023)
RCI is on Sale For Spring!!
RCI Gas Tank Skid Plate | 4th & 5th Gen 4Runner GX470 GX460
- Fits all Lexus GX470 and GX460 Models, and all 4th and 5th Gen Toyota 4Runner 2003-2024
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surface that easily slides over obstacles
- Material: 3/16” Steel or 1/4” 5052 Aluminum Alloy
- Weight: 3/16” Steel- 52lbs. Aluminum- 26lbs.
- Finish: Heavy Duty Black Powder Coat or Bare Metal
- Made in the USA
Original price was: $349.00.Current price is: $314.10. Select options
Long Range Tanks
Lexus GX470 & 4th Gen 4Runner Long Range Auxiliary Fuel Tank (24gal)
- Suits Lexus GX470 (all years) and 4th Gen 4Runner (all years 2003-2009), works without KDSS and without air suspension
- This is an additional tank that goes behind the rear axle, it holds 24 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 24 gallon capacity, fits in the void behind the rear axle and in front of the rear bumper, requires relocation of the stock spare tire
- 24 gallon size is a redesign of the 33 gallon, to maintain better clearance under the tank
- 24 gallons plus your original 23 gallon tank gives you a capacity of 47 gallons in total!!
- SPLIT FILL – Single fill point with no diversion – fuel flows into both tanks until both are full
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Spare tire must be relocated
- Fitting time – approximately 5 hours
- Does not suit KDSS models and does not suit air suspension models
- Usually stocked item in the US
- Part Number TL470GXA24-US
- Intended to be installed by a certified mechanic
- Installation Instructions
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
$2,145.00 Select options
Sale!
Pro Comp
Pro Comp 65205 2.25″ Leveling Kit – 4Runner Tacoma FJ GX470 GX460
- Fits 2003 to 2009 Toyota 4Runner 4th Gen
- Fits 2010 to 2024 Toyota 4Runner 5th Gen
- Fits all Lexus GX470 and GX460 WITHOUT adjustable suspension
- Fits all FJ Cruiser
- Fits 2005 to 2023 Toyota Tacoma 2nd and 3rd Gen
- Level Lift Front Strut Spacers
- Includes Diff Drop Kit
- Lift Height: 2.25 Inch
- Max Tire Size: 32 Inch
- Easy to return to stock height
- If your vehicle has XREAS or adjustable height suspension, you cannot use this kit
- View/Download Installation Instructions
Original price was: $179.99.Current price is: $95.00. Add to cart
On Backorder
4Runner 4th Gen (2003-2009)
ETA is July 2024
Dobinsons Tubular UCA Kit | 4Runner FJ GX470 GX460 – No Ball Joints
- Set of upper control arms for both left and right hand side, includes OE style rubber frame bushings and washers
- Uses OE replacement ball joints – not included in this page
- NOTE: This set DOES NOT INCLUDE ANY BALL JOINTS – you can buy your own OEM replacements and install them
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right arms, ball joint caps, and hardware to mount ABS lines
- Also available with ball joints installed, here
$575.00 Add to cart
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
- 2003-2009 Toyota 4Runner
  
  2010-2024 Toyota 4Runner
  
  2005-2015 Toyota Tacoma
  
  2016-2023 Toyota Tacoma
  
  2006+ FJ Cruiser (all years)
  
  2003-2009 Lexus GX470
  
  2010-2023 Lexus GX460
  
  Toyota Hilux Vigo
  
  Toyota Hilux Revo
  
  Toyota Fortuner
  
  Toyota Prado 120
  
  Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
$69.00 Add to cart
Trail-Gear
TG Diff Drop Kit – 05+ Tacoma 03+ 4Runner FJ Cruiser GX470 GX460
- Solid aircraft-grade 6061-T6 aluminum spacers
- Zinc-plated Grade 8 hardware
- Aluminum spacers and longer zinc-plated Class 8.8 bolts to move the stock skid plate down
- TRD Pro models may require different length bolts due to variations from Toyota
- Fits the following applications:
  
  Toyota Tacoma 2005-2023 (All Engines)
  
  Toyota FJ Cruiser 2007-2014 (All Engines)
  
  Toyota 4Runner 2003-2024 (All Engines)
  
  Lexus GX470 (all years)
  
  Lexus GX460 (all years)
  
  Toyota Hilux Vigo (all years)
  
  Toyota Hilux Revo (all years)
  
  Toyota Fortuner (all years)
- Made in USA
$58.00 Add to cart
Coil Springs - 4th Gen 4Runner
Dobinsons Front Coil Spring Options for V6 Toyota 4th Gen 4Runner 2003-2009
- THIS IS FOR V6 ENGINE 4X4 MODELS ONLY – V8 models use a different set of specs
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- All specs are listed for 4×4 models. 2WD models lift about 1″ more due to less weight
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- C59-238 – Stock front end, low height 3/4″ to 1″
- C59-296 – Stock front end, 1.5″ lift
- C59-300 – Stock front end, 1.75-2.0″ lift
- C59-302 – Stock – 2.5″ | with 110-150lbs – 2″
- C59-314 – Stock – 3″ | with 110-220lbs – 2.5″
- C59-350 – With 220-300lbs – 1.5″ | Heavy rate coils
- C59-352 – With 220-300lbs – 2″ | Heavy rate coils
- C59-354 – With 220-300lbs – 2.5″ | Heavy rate coils
From $270.00 Select options
Replacement Bushings
Dobinsons Upper Shock Bushing Kit – For -701, -705, -575
- Dobinsons replacement upper shock bushing kit with washers
- Suits a variety of Dobinsons shocks, part numbers ending in -701, -705, -575
- Full list of part numbers this fits is below
- This is for 2 upper bushings and washers only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes of the bushing type
$20.00 Add to cart
Sale!
4Runner 4th Gen (2003-2009)
RCI is on Sale For Spring!!
RCI Rear Diff Skid Plate | 03-09 4Runner GX470
- Suits Toyota 4Runner 4th Gen 2003-2009 and Lexus GX470 WITHOUT KDSS
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
Original price was: $335.00.Current price is: $301.50. Add to cart
Bump Stops
Ships FREE !!
within 48 US States
Dobinsons Rear Adjustable Hydro Bump Stop Kit | 4Runner FJ Cruiser GX470 GX460
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits Toyota 4Runner from 2003-2024, FJ Cruiser all years, Toyota Prado 120 and 150 all years, Lexus GX470 all years, Lexus GX460 all years (models without rear airbags only)
- Choose from 0-2.5″ lift or 3″+ lift length bump stops from the drop down menu
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Installation Instructions and here
$940.00 Select options
Sale!
4Runner 4th Gen (2003-2009)
RCI is on Sale For Spring!!
RCI Rock Sliders | 03-09 4Runner + GX 470
- Fits 2003-2009 4runners without Xreas, unless you’ve removed those lines. Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- *Does not fit KDSS models of GX470, unless you remove KDSS system from frame
- Made to order from your selections below
- Made in USA
Original price was: $765.00.Current price is: $688.50. Select options