4Runner

Showing 181–210 of 316 resultsSorted by popularity

Differential | Drivetrain
Ultimate Toyota Knuckle Rebuild Kit
- Suits TOYOTA PICKUP (1979-1985), TOYOTA 4RUNNER (1985), TOYOTA LAND CRUISER FJ40 (1979-1983), TOYOTA LAND CRUISER FJ50 (1979-1980), TOYOTA LAND CRUISER FJ60 (1980-1990), TOYOTA LAND CRUISER FJ70 – Models with 4-stud knuckles only (1984-CURRENT)
- The Ultimate Toyota Knuckle Rebuild Kit includes gaskets, upgraded seals, high-quality bearings and more. We’ve even included the specialty tools needed to complete the job. Simply put, this is the best, most complete knuckle rebuild kit available!
- Includes:
  
  (1) 54mm Spindle Socket
  
  (1) Knuckle Pull Scale
  
  (1) Upgraded HD Inner Axle Seals
  
  (2) Koyo* Front Wheel Bearing Kits (Includes 2 Inner and 2 Outer Bearings and 2 Spindle Seals)
  
  (1) Trail-Safe Wiper Seals with Rock Rings and Extended Hardware
  
  (2) Brass Spindle Bushings
  
  (2) Wheel Bearing Nut Kits
  
  (1) Spindle Stud Kit
  
  (4) Koyo** Trunnion Bearings
  
  (1) Trunnion Bearing Shim Pack
  
  (2) Inner Steel Rings that go behind the Wiper Seals
  
  (2) Inner Spindle Gaskets
  
  (2) Outer Spindle Gaskets
  
  (2) Hub Inner Gaskets
  
  (2) Hub Outer Gaskets
  
  (2) Hub Dial O-Rings for Aisin Hubs
  
  (1) Toyota Ultimate Backing Plate Eliminator Kit
  
  * Some kits may contain Timken bearing kits when Koyo bearings are not available.
  
  ** Some kits may contain Schaeffler/FAG trunnion bearings when Koyo bearings are not available.
- Does not fit FJ80 Land Cruiser front axles
Rated 5.00 out of 5
(8 reviews)
$460.00 Add to cart
4Runner 4th Gen (2003-2009)
FREE SHIPPING
within 48 US States
RCI Engine Skid Plate | 03-09 4Runner GX470 FJ Cruiser
- Fits Toyota FJ Cruiser 2006-2009 models, 2003-2009 Toyota 4Runner, 2003-2009 Lexus GX470 non-KDSS models
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
Rated 5.00 out of 5
(4 reviews)
$329.99 Select options
Skid Plates
FREE SHIPPING
within 48 US States
RCI Lexus GX460 / 5th Gen 4Runner Engine Skid Plate w/KDSS
- Fits KDSS Model 5th Gen 4Runners 2010-2024 and all GX460 models. On GX460, the oil filter access will not be used
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
Rated 5.00 out of 5
(4 reviews)
$349.99 Select options
Full Suspension Kits - 4th Gen 4runner
FREE SHIPPING
within 48 US States
Bilstein 5100 Shock Kit for 4th Gen 4Runner
- Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit – Front and Rear
- Suits 2003-2009 Toyota 4Runner 4th Gen
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID
- Internal Design: Mono tube
- Boot Included: Yes
- NO TOP STRUT BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil springs
- Installation Instructions
Rated 5.00 out of 5
(6 reviews)
From $544.00 Select options
4Runner 3rd Gen (1996-2002)
FREE SHIPPING
within 48 US States
Timbren ABSTOR4R Active Off Road Rear Bump Stops | 1990-2002 4Runner
- Suits all 1990 to 2002 Toyota 4Runner, and also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
Rated 5.00 out of 5
(14 reviews)
$269.36 Add to cart
On Backorder
4Runner 3rd Gen (1996-2002)
3rd Gen 4Runner Long Range Auxiliary Fuel Tank (29gal)
- Suits 3rd Gen Toyota 4Runner 1996 to 2002 with Gasoline Engines. Also fits the international Toyota Hilux Surf (petrol only)
- 1996-2000 — No mods beyond normal
- 2001-2002 — Will require relocation of the charcoal canister
- This is an additional tank that goes behind the rear axle, it holds 29 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 29 gallon capacity, fits in the void behind the rear axle and in front of the rear bumper, requires relocation of the stock spare tire
- 29 gallons plus your original 18.5 gallon tank gives you a capacity of 47.5 gallons in total!!
- Filling of this tank is done via a new twin filler neck that replaces the original filler
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Spare tire must be relocated
- Fitting time – approximately 5 hours
- This is a special order tank and takes 4-6 months to bring from Australia. Special orders cannot be cancelled or returned
- Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- Installation Instructions
- **This tank is only for gasoline or petrol models. Long Range makes a different tank for the diesel, but it’s not carried in the USA
- MADE IN AUSTRALIA
Rated 5.00 out of 5
(5 reviews)
$2,245.00 Select options
4Runner 1st Gen (9/1985-1989)
Dobinsons Rear Leaf Springs Pair for Toyota 4Runner 1984 to 1989
- Suits 1984-1989 Toyota 4Runner with rear leaf springs
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
Rated 5.00 out of 5
(4 reviews)
$710.00 Add to cart
Full Suspension Kits - 4runner 1st Gen
Dobinsons Toyota 4Runner 1st Gen Suspension – 1985-1989
- Suits 1985 to 1989 1st Gen Toyota 4Runner, with torsion bar IFS up front and leaf springs in the rear
- Select all or which parts you would like for your vehicle
- Choose from different shock types, twin tube or monotube
- Comprehensive complete full suspension replacement when all parts are chosen
- High quality components built to last and endure all climates
- With all parts purchased, this will yield 2″ lift front and rear
- Select a part from the drop down list, then click the small square that appears to the right of it to see the full specs of that product
Rated 5.00 out of 5
(13 reviews)
From $945.00 Select options
4Runner 5th Gen (2010-2024)
3/4″ Rear Coil Spacer Single | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4th Gen 4Runner – 2003 to 2009, Toyota 5th Gen 4Runner – 2010 to 2024, Toyota FJ Cruiser – all years, Lexus GX470 – all years, Lexus GX460 – all years, Toyota Prado 120 – all years, Toyota Prado 150 – all years
- Sold Individually
- Long lasting – hard durometer polyurethane
- Easily add rear lift or fix leaning issues
- Optional- bolt to the coil bucket for easy installation. We have noticed that it can be difficult for customers to install other brands, as they tend to slide around while you are trying to reinstall the spring. Bolting it to the coil bucket eliminates that issue.
- Do not stack
- Fits any OE style spring – Top Cone isolator- Apache, Dobinsons, Ironman, OEM, Old Man Emu, Alldogs Offroad, etc.
- NOT compatible with Eibach rear lift springs used in their air to coil conversions – GX470/460 etc.
- Cone Isolator shown in picture not included
- Airbag Models will need to convert for coil springs for these to work
Rated 5.00 out of 5
(10 reviews)
$45.00 Add to cart
Brake Lines
FREE SHIPPING
within 48 US States
Apache Offroad Extended Rear Brake Lines for 4Runner FJ GX470 GX460
- D.O.T. Certified stainless steel braided and coated with a PVC cover
- 20″ long, works with long travel rear suspension setups
- Suits up to 4″ of lift with long travel shocks or not
- Suits the following vehicles: Toyota 4Runner 4th Gen 2003-2009, Toyota 4Runner 5th Gen 2010-2024, Toyota FJ Cruiser all years, Lexus GX470 all years, Lexus GX460 all years
- Not recommended for stock or un-lifted vehicles, as the brake lines are much longer than necessary
- Sold as a pair with new retaining clips
- Warranty- 2 Year unlimited mile warranty against manufacturers defects.
Rated 5.00 out of 5
(10 reviews)
$95.00 Add to cart
On Backorder
Suspension
KDSS Spacer Kit – Lexus GX460 5th Gen 4Runner – Rears Only
- Rear spacers only (2 rear spacers included with hardware)
- Suits 5th Gen Toyota 4Runner with KDSS (2010-2024) and Lexus GX460 (2010-2023)
- Made from 6061 aluminum, Type III hard coat anodized in black, and supplied with new hardware
- Helps correct incessant lean of a lifted vehicle with KDSS by adding a spacers to both mounts on the rear
- Bolt on installation
- Mounts between factory points that hold the sway bar in place
- Raised/longer spacers helps correct the lean of a vehicle and also adds additional rear travel in the back to help clear the sway bar link from the panhard rod at full extension
- Includes rear mounts (2 in total)
- See instructional video for how these get installed here
- Installation Instructions
- A full kit including the single front spacer is also offered HERE
Rated 5.00 out of 5
(16 reviews)
$150.00 Add to cart
Pickup / Hilux (1979-1985)
Dobinsons Front U-Bolts – 2 Pairs – 1979-1985 Toyota Pickup/4Runner Front
- Combination kit of front u-bolts for 1979-1985 Toyota Pickup (Hilux) and 4Runner Front ends
- This is a combination with a pair of UB59-449-3K and a pair of UB59-667K, as they’re different on one side than the other.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Photo for illustration purposes only. These are round and square at the top to suit the axle properly
(0 reviews)
$100.00 Add to cart
4Runner 5th Gen (2010-2024)
Dobinsons Front Winch Bumper for Toyota 4Runner 2014-2024
- Suits 5th Gen Toyota 4Runner from 2014-2024 (will not fit 2010-2013)
- Winch compatible, up to 12,000 LB winches
- Driving Light Mounts
- Optional Fog Lights – Here for more details
- Optional Front Driving Lights (as shown in photos) – Here for more details
- Cutting of the original front plastic bumper is required
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop
- Suits 10,000 and 12,000 LB Low Mount Winches – requires offset fairlead
- Installation Instructions
- Truck freight shipping is usually to the nearest freight terminal, or commercial address with forklift
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
Rated 5.00 out of 5
(10 reviews)
From $2,075.00 Select options
ARB
OME 2885 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2885
- Bar Size : 16.5mm
- Free Height : 395mm
- Number of Turns : 9.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
- These are NOT COMPATIBLE with the newer MT64 struts from Old Man Emu – They don’t fit
Rated 5.00 out of 5
(12 reviews)
$224.95 Add to cart
Differential | Drivetrain
FREE SHIPPING
within 48 US States
ARB RD111 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.91+
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.91 And Up FactoryGears
- Usually all models that came with an automatic transmission used 3.91+ gear ratios, but some more modern Toyota and Lexus use 3.73 gears from the factory
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are changing to aftermarket gears, check with that gear manufacturer on which gears to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
Rated 5.00 out of 5
(11 reviews)
$1,113.95 Select options
Skid Plates
FREE SHIPPING
within 48 US States
ARB 5421100 Skid Plate Kit | Toyota 4Runner 5th Gen (no KDSS)
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITHOUT KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
Rated 5.00 out of 5
(7 reviews)
$579.95 Add to cart
4Runner 4th Gen (2003-2009)
FREE SHIPPING
within 48 US States
Dirt King Performance Lower Control Arms Pair – 4th Gen T4R Early FJC GX470 non-KDSS
- Suits 2003-2009 Toyota 4Runner 2WD / 4WD, 2003-2009 Lexus GX470 4WD, 2007-2009 Toyota FJ Cruiser 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
Rated 5.00 out of 5
(4 reviews)
$1,812.00 Add to cart
Brake Lines
FREE SHIPPING
within 48 US States
Apache Offroad Extended Front Brake Lines | 4Runner FJ GX470 GX460 Tacoma Tundra Sequoia
- Suits the following vehicles: Toyota 4Runner 4th Gen 2003-2009, Toyota 4Runner 5th Gen 2010-2024, Toyota FJ Cruiser all years, Lexus GX470 all years, Lexus GX460 all years, Tacoma 2005-2023, Tundra 2000-2006, Sequoia 2001-2007
- D.O.T. Certified stainless steel braided and coated with a PVC cover
- +2″ longer than stock
- Suits up to 4″ of lift with extended travel struts or coilovers, or stock
- Can be used on a stock height vehicle
- Sold as a pair
- OE Style Fittings- Reuse OEM Clips
- Warranty- 2 Year unlimited mile warranty against manufacturers defects
Rated 5.00 out of 5
(10 reviews)
$99.00 Add to cart
On Backorder
Coil Springs
Dobinsons C59-276B Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair Black
- 3rd Gen 4Runner 4×4 (1996-2002) – Lifts 2″ on a stock to medium load front end
- Toyota Tacoma 4×4 1998 to 2004 – 1.5″ with stock weight
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 362mm free height, 586LBF/in spring rate
- Sold in Pairs
- Also offered in the Teal color
(0 reviews)
$270.00 Add to cart
Dobinsons
Dobinsons UCA Ball Joint Cap Cover for Tubular UCA’s
- Suits all Dobinsons Tubular UCA’s
- Fits the UCA’s made for Tacoma, 4Runner, GX470, GX460, LC100, LC200, Ranger, Hilux, Fortuner
- Machined ball joint cap with o-ring to seal the top of a ball joint
- Black with Dobinsons logo engraved in it
- Sold individually
Rated 5.00 out of 5
(6 reviews)
$30.00 Add to cart
4Runner 2nd Gen (1990-1995)
FREE SHIPPING
within 48 US States
Dobinsons Toyota 4Runner 2.0″ Suspension Kit for 1990-1995
- Suits Toyota 4Runner 1990-1995 USA models with torsion bars up front and coil springs in the rear
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Multiple coil spring options
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Choose which specific parts you’d like from the menu below
Rated 5.00 out of 5
(10 reviews)
From $1,215.00 Select options
4Runner 2nd Gen (1990-1995)
FREE SHIPPING
within 48 US States
Dobinsons Toyota 4Runner 2.0″ IMS Suspension Kit for 1990-1995
- Suits Toyota 4Runner 1990-1995 USA models with torsion bars up front and coil springs in the rear
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Multiple coil spring options
- Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Choose which specific parts you’d like from the menu below
Rated 5.00 out of 5
(6 reviews)
From $1,755.00 Select options
Timbren
FREE SHIPPING
within 48 US States
Timbren TORSEQ SES Suspension Enhancement System | Toyota and Lexus SUV’s
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series, Sequoia 2001-2007
- This is only for use with stock height rear coils – will not work correctly on a lifted vehicle
- Great alternative to airbags, never needs any air or maintenance yet provides the same function
- Reduces sag, sway, and roll when towing and hauling
- Comfortable ride, loaded or unloaded
- DIY installation
- Bolts in where the factory bump stops go
- Zero post-installation maintenance
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
Rated 5.00 out of 5
(14 reviews)
$269.36 Add to cart
4Runner 3rd Gen (1996-2002)
FREE SHIPPING
within 48 US States
Dobinsons 2-2.5″ 3-Way Adjustable MRA 4Runner Coilovers for 1996-2002
- Suits 1996-2002 Toyota 4Runner 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
- Link to matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(2 reviews)
$1,820.00 Select options
Performance Upgrade - 5th Gen 4Runner
FREE SHIPPING
within 48 US States
Powerbrake D-Line HP Rotor and Pad Kit | 4Runner 10-24 Front
- Suits Toyota 4Runner 5th Gen 2010-2024 Front
- Also available for the REAR
- Powerbrake D-Line Features
  
  Rotors are cast from a proprietary high carbon cast-iron alloy.
  
  Rotors are machined to tolerances up to three times tighter than the industry norm.
  
  All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
  
  Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
  
  Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
  
  Matched high friction PB05 brake pads take the guesswork out of pad selection.
  
  Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
  
  Reduced stopping distances in both wet and dry conditions.
  
  Reduced brake fade and improved brake consistency.
  
  Improved initial brake response (bite).
  
  Improved brake modulation particularly during emergency stops.
  
  Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
  
  2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
  
  An axle set of matched PB05 high-performance brake pads – Made in Japan.
  
  Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
Rated 5.00 out of 5
(4 reviews)
$899.00 Add to cart
Skid Plates
FREE SHIPPING
within 48 US States
RCI Catalytic Guards | 2003-24 4Runner / FJ / GX
- REQUIRES RCI TRANSMISSION SKID PLATE FOR INSTALLATION
- Fits: 2003-2024 4Runner, FJ Cruiser (all years), GX470 and GX460 (all years)
- Protects exposed catalytic converters from on and off road debris
- Excellent addition to the RCI Transmission skid to aid in preventing catalytic converter thefts
- Vented design for adequate airflow and heat dissipation
- Smooth, flat surface that easily slides over obstacles
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing RCI Transmission skid, drilling may be required until manufacturing begins on pre cut out holes on Transmission skid plate
- Designed around the most current RCI transmission skid plate with 2in double bent side flange
- Requires RCI Transmission Skid Plate for installation
- Catalytic Guard Retrofit Guide for RCI Transmission Skid Plates
Rated 5.00 out of 5
(2 reviews)
$128.99 Select options
Bilstein
FREE SHIPPING
within 48 US States
Bilstein 47-310025 Front 6112 Series Kit
- Bilstein 6112 Series Ride Height Adjustable Front Coilover Kit
- Suits 2010-2024 Toyota 4Runner, 2010-2023 Lexus GX460
- Sold as a set, 1 per vehicle
- Photo shows all parts included (does not include top strut mounts)
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 60mm ID snap ring grooved body (Coilover)
- Internal Design: Mono tube
- Boot Included: No
- Coil Springs Included: Yes
- Spring Rate: 600 LBF/in
- Not for X-REAS suspension
- Strut mounts are not included – USE THIS KIT
- Installation Instructions
- Suitable matching rear shocks
Rated 5.00 out of 5
(5 reviews)
$842.00 Add to cart
Suspension
Dobinsons SD59-821 Big Bore Steering Damper – Toyota Pickup & 4Runner (1979-1985)
- Suits Pre-1985 Leaf Spring front end Toyota Pickup and Toyota 4Runner 4×4’s
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
Rated 5.00 out of 5
(3 reviews)
$135.00 Add to cart
Brakes
FREE SHIPPING
within 48 US States
Powerbrake X-Line 4×4 3rd Gen 4Runner Big Brake Kit 1996-2002
1996-2002 3rd Gen 4Runner Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
Rated 5.00 out of 5
(6 reviews)
$2,675.00
Caliper Color

Powerbrake X-Line 4x4 3rd Gen 4Runner Big Brake Kit 1996-2002 quantity
Select options This product has multiple variants. The options may be chosen on the product page
ARB
OME 303003 Torsion Bar Pair for Toyota 4Runner 1986-1995
- Suits the 1st and 2nd Gen Toyota 4Runner from 1986 to 1995 and Toyota Pickup/Hilux 1988-1995
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Sold as a set
- Specs: 1065mm long, 23.4mm bar thickness
Rated 5.00 out of 5
(8 reviews)
$237.95 Add to cart