Your cart is currently empty!
200 Series Land Cruiser (2008-2021)
Showing 1–30 of 69 resultsSorted by popularity
-
Full Suspension Kits - 200 Series (5)
-
Bumpers + Racks - 200 Series (5)
-
Performance Upgrades - 200 Series (20)
-
Fuel Tanks - 200 Series (3)
-
Control Arms - 200 Series (14)
-
Coil Springs - 200 Series (11)
-
Shocks + Struts - 200 Series (8)
-
Bump Stops - 200 Series (8)
-
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60682 Rear 2.6″ IFP Shocks Pair | Sequoia + Land Cruiser 80/100/200 0-3″
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, 100 Series 1998-2007, and 200 Series Wagon 2008-2020, as well as 2001-2007 Sequoia for 0-3″ of lift
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- 610mm extended, 389mm compressed
(14 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons GS59-682 0-3″ Rear Shocks Pair | Sequoia, Land Cruiser 80, 100, 200 Series
- Suits Toyota Sequoia 2001-2007 as well as Land Cruiser 80 series, Lexus LX450, 100 series, and 200 series for 0-3″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-682 Specifications: 630mm extended, 382mm compressed, 60mm body size
(6 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A682 3-Way Adjustable MRA Rear Shocks Pair | 0-3″ Lift
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, 100 Series 1998-2007, and 200 Series Wagon 2008-2021, Sequoia 2001-2007, suitable for 0 – 3″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 620mm extended, 390mm compressed
- Installation Instructions of the MRA Shocks
(19 reviews) -
Dobinsons
Dobinsons DD59-530K Front Diff Drop Kit | Tundra Sequoia Land Cruiser
- Suits 2007-2021 Toyota Tundra, 2008-2022 Toyota Sequoia and 2008-2021 Toyota Land Cruiser 200 Series
- Keeps CV angles at a good working angle when lifted
- Suitable for lifts over 2.0″
- Includes all necessary hardware
- Compliments Dobinsons 2″+ lifts for IFS Toyota vehicles
- Installation Instructions
(16 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series – all years
- Toyota 300 Series Land Cruiser
- Lexus LX570 – all years
- Toyota Tundra – 2007 to 2021
- Toyota Tundra 2022+
- Toyota Sequoia – 2008 to 2022
- Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
(19 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons SC59-006 Pair of Strut Top Plates | Land Cruiser 200 Series 2007-21
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product is exactly the same as photo attached
- Assembly Instructions
(9 reviews) -
Bump Stops & SpacersFREE SHIPPING
within 48 US StatesDobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
(10 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Land Cruiser 200 Series + Lexus LX570
- Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
- These arms come fully assembled with the ball joints and bushings installed
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-559V 1.5-2″ Land Cruiser 200 Series Rear Coils – Pair
- C59-559V – 1.5-2.0″ Lift Variable Rate – great for towing – lift height depends on rear vehicle weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 440/470 mm free height and 19mm wire diameter
- Sold as a Pair
(16 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
Replacement Bushings
Dobinsons Lower Shock Bushings (2 Halves) for -682 -687 -685 -649 -651 -637
- Dobinsons replacement rear lower shock bushing – 2 half bushings for 1 shock
- Suits a variety of Dobinsons shocks, part numbers ending in -682 -687 -685 -649 -651 -637
- Full list of part numbers this fits is below
- This is for a single bushing set only for 1 shock
- 2 half bushings, they go in from either side of the lower eyelet to form a complete bushing
- High quality natural rubber bushing
(0 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60688 2.6″ IFP Front Struts Pair | Land Cruiser 200 Series
- Front struts only (no coils). For a full suspension, click here
- Adjusters on the shock body are black, not purple
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- 606mm extended, 438mm compressed
- SOLD IN PAIRS
(15 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-542 2″ Land Cruiser 200 Series Front Coils – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445/440mm free height, 19mm wire, 580LB rate
- Sold as a Pair
(5 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons 200 Series Land Cruiser 1.0-2.5″ IMS Lift Kit
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
(12 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesFirestone 4164 Coil-Rite Rear Helper Air Springs (Airbags) | 200 Series and Sequoia
- Firestone 4164 Suits Toyota Landcruiser 200 Series and Lexus LX570 2008-2020, Toyota Sequoia 2008-2022 with coil springs in the rear
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Works with all Dobinsons rear coils for these vehicles
- Works with 0-1.5″ of lift
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA Front Struts Pair | Land Cruiser 200 Series
- Suits 2008-2021 Toyota Land Cruiser 200 Series
- Adjuster rings on strut body are black, not purple
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- Height adjustable with a fully threaded body
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Reservoir mounting installation
- Must mount the banjo fitting and hose inwards to engine on MRA struts
(18 reviews) -
Dobinsons
Dobinsons UCA Ball Joint for 4Runner FJ Cruiser GX470 GX460 LC200
- Suits Dobinsons UCA’s that fit Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460, Land Cruiser 100 and 200 Series
- This ball joint will fit UCA part numbers UCA59-001K, UCA59-002K, UCA59-006K, UCA59-201K, UCA59-202K, UCA59-206K
- Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Sold individually
- Includes new ball joint, boot, split pin and nut (subject to design changes)
(6 reviews) -
Sale!15% off Year End SaleAll Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro Complete CV Boot Kit | Tundra 07-21 + Sequoia 08-22 + 200 Series 08-21
- Complete CV boot replacement kit – Suits Toyota Tundra 2007-2021, Toyota Sequoia 2008-2022, and Toyota Land Cruiser 200 Series 2008-2021
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(15 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-544 2.5″ Land Cruiser 200 Series Front Coils – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 455/450mm free height, 19mm wire, 580LB rate
- Sold as a Pair
(3 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
200 Series Land Cruiser (2008-2021)
Dobinsons 200 Series Land Cruiser 1.0-2.5″ Lift Kit (all options)
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- FOR MRA STRUTS, BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Reservoir mounting instructions for MRA struts, it’s the same for KDSS and non-KDSS
(9 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA 200 Series Lift Kit | (2008-2021) 1-2.5″
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Reservoir mounting instructions, it’s the same for KDSS and non-KDSS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
(8 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-535 2-3″ Land Cruiser 200 Series Rear Coils – Pair
- C59-535 – 3″ lift with stock weight, 2.0″ with 220LBS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 490/460mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(3 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
200 Series Land Cruiser (2008-2021)
Dobinsons GS59-688 Pair of Front Struts for Land Cruiser 200 Series 2008-2021
- Suits all years of Toyota Land Cruiser 200 Series and Lexus LX570
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-688 Specifications: 600mm extended, 435mm compressed, 60mm body size
(10 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons Rear Adjustable Panhard Rod Track Bar | Land Cruiser 200 250 300
- Suits Toyota Land Cruiser 200 Series 2008-2021, Toyota Tundra 2022+ and Toyota Sequoia 2023+, and Toyota Land Cruiser 300 Series 2022+, and 2024+ Toyota Land Cruiser 250 Series
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(5 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesTimbren ABSTORLC2 Active Off Road Toyota 200 Series Rear Bump Stops
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 2008 to 2021 Toyota Landcruiser 200 Series Rear End
- Click here for instructions
(12 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-540 1.4″ Land Cruiser 200 Series Front Coils – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 435/430mm free height, 19mm wire, 580LB rate
- Sold as a Pair
(17 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Accessories
Dobinsons 200 Series Drawers for Toyota Land Cruiser 2008-2019
- Complete drawer system for the back of your 200 Series Land Cruiser or Lexus LX570
- Optional side wing kit and drawer dividers and table top
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Super clean installation and DOES NOT rattle unlike some other drawer systems on the market
- Aluminum Edging Protection, Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- New body style will need longer bolts and extra washers
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(10 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-547 2″ VHD Land Cruiser 200 Series Rear Coils – Pair
- C59-547 – 2″ lift with 880LBS constant rear weight, 2.5″ with 550LBS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 520/490mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(3 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-545 3″ HD Land Cruiser 200 Series Rear Coils – Pair
- C59-545 – 4″ lift with stock weight, 3″ lift with 220 LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/470mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(7 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
SPCFREE SHIPPING
within 48 US StatesSPC 25465 | UCA’s for Land Cruiser 200 Series & LX570 Pair
- Suits all Toyota Land Cruiser 200 Series and Lexus LX570 models – 2008-2021
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- We offer replacement ball joints as well
(10 reviews)
