Your cart is currently empty!
Tacoma 2nd Gen (2005-2015)
Showing 31–60 of 182 resultsSorted by popularity
-
SuspensionOn Sale All November!!
Dobinsons 3-Way Adjustable Tacoma MRA Lift Kit for 2005-23 4×4 (0-3.5″)
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Long bed models require the next step up in leaf spring, or they will sit 1″ less high. L59-110-R lift only 1″ on long bed models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Dobinsons MRA front struts are height adjustable by a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel Fronts – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat up front
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes front vehicle-specific resi brackets, rear includes resi brackets that get mounted to the frame as shown in the photos
- Coilover adjuster wrench is included for the fronts
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Multiple different leaf springs options to match up with the added weight you’ve put on your truck or not
- Base kit includes front coils, front struts, rear leaf springs, and rear shocks, then you choose all of the desired add-ons from there, as well as the selections of each under the submenus
- For installation instructions, click here
(11 reviews) -
Bump StopsOn Sale All November!!
Wheeler’s Front Superbump Set for Toyota & Lexus Trucks & SUV’s
- Suits the following vehicles: 2005-current Tacoma, 2003-2024 4Runner, all FJ Cruiser years, Lexus GX470 and GX460, 2007-2021 Tundra, 2022+ Tundra, 2008-2024 Sequoia
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), hardware, and an Allen wrench for installation
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Optional spacers and longer hardware are sold separately for fine tuning of bump stop clearances
- Installation Instructions
(8 reviews) -
DobinsonsOn Sale All November!!
Dobinsons CV Boot Kit Inner & Outer Bundle | Tacoma 4Runner FJ GX470 GX460
- Complete INNER and OUTER kit includes 2 new OUTER boots, 2 new INNER boots, grease, and required clamps – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round on the outer boots
- Inside shape is hex on the inner boots
- These still install the old fashioned way without custom stretch boot tools needed
(17 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 0-3″ 3-Way Adjustable MRA Tacoma Coilovers for 2005-2023
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Looking for a quick and easy way to lift your Tacoma? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks – MRA59-A940 Regular Travel or MRA59-A941 Long Travel
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(5 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA59-A941 3-Way Adjustable MRA Long Travel Rear Shocks Pair
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
- 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
- EDP Surface Protection, Direct Bolt-On Design
- Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
- 16.5″ compressed length, 26.9″ extended length
- SOLD IN PAIRS
- Includes reservoir brackets and hardware
- Installation Instructions
- These shocks require extended brake lines and extended bump stops
(17 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesOn Sale All November!!All Pro Complete CV Boot Kit | Long Travel for 2005-23 Tacoma
- Complete CV boot replacement kit – Suits 2005-2023 Toyota Tacoma
- Includes inner OEM-Style CV boots and outer LONG TRAVEL CV boots and all related clamps
- Does not require long travel suspension to run this kit
- Qty 2 – OEM-Style Neoprene Long Travel Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(15 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Timbren ABSTRFK Tacoma U-Bolt flip and Active Bump Stops Kit | 2005-2023 Tacoma
- Suits 2005 to 2023 Toyota Tacoma 4×4 models
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Includes incorporated u-bolt flip kit for additional clearance below
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(14 reviews) -
Brake LinesOn Sale All November!!
Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 4″ longer than stock for long travel suspension lifts
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with any lift height, however these are extra long for long travel rear shocks
- Sold as a pair with new retaining clips
(9 reviews) -
SuspensionOn Sale All November!!
Dobinsons Tacoma IMS Kit for 2005 to 2023 4×4 (0-3.5″)
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Long bed models require the next step up in leaf spring, or they will sit 1″ less high. L59-110-R lift only 1″ on long bed models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Multiple different leaf springs options to match up with the added weight you’ve put on your truck or not
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Base kit usually starts with front coils, struts, rear leaf springs, poly bush kit, rear shocks, 1 pair greasable pins. You choose what you want
(13 reviews) -
Bump StopsOn Sale All November!!
Dobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
(10 reviews) -
-
SPCFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!SPC 25470 | UCA’s for Tacoma 2005-2023 Pair
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Now with updated maintenance-free sealed ball joints
- Installation Instructions
- We offer replacement ball joints as well
(10 reviews) -
ARB
OME Tacoma Leaf Spring Bushing Kit | 2005-2023 Tacoma
- 1 kit fits both ends of ONE leaf spring (the fixed end and the shackle end)
- Each kit comes with 4 identical poly half bushings and 2 sleeves
- Order 2 kits to replace the bushings in 4 locations of 2 leaf springs
- Order 3 kits if you want to replace all 6 bushing locations related to the leaf springs
- Polyurethane bushings with steel sleeves
(7 reviews) -
Long Range TanksOn Sale All November!!Taking orders for JAN 2025
Delivery, 20 remainingToyota Tacoma Long Range Replacement Fuel Tank 2005-2023 (33gal)
- Suits Toyota Tacoma 2005-2023 4×4 Short and Long Bed models (requires additional parts from below for some variants) (WILL NOT SUIT 2018+ ACCESS CAB LONG BED MODELS!!)
- This is a replacement tank that replaces your OE fuel tank, it holds 33 gallons instead of the stock 21 gallons and fills the same way an OE tank fills
- 33 gallon capacity, replaces the original tank
- Tank fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 5 hours by a professional
- Weight of tank without fuel is 90 LBS
- The fuel gauge will remain accurate, DTE will not. Once the E-light comes on there is 7 gallons remaining
- Part Number TTACDCR
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California due to SMOG rules. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(15 reviews) -
DobinsonsOn Sale All November!!
Dobinsons IMS59-50941 Long Travel Rear 2.2″ IFP Shocks Pair for 2005-23 Tacoma
- Suits Toyota Tacoma 2005-2023 2nd and 3rd Gen 4×4 and Prerunner models
- Longer travel rear shocks for maximum down travel with a bolt-on shock
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Specifications 16.5″ compressed length, 26.9″ extended length
- These shocks require extended brake lines and extended bump stops
- Full 2 year limited warranty, no set rebuild time period
(18 reviews) -
Brake LinesOn Sale All November!!
Extended Rear Brake Lines +2″ for Toyota Tacoma 2005-2023 (Red)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 2″ longer than stock for most suspension lifts (not long travel)
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with a non-lifted truck, or with any lifted truck where the shocks aren’t long travel
- Sold as a pair with new retaining clips
- This set is RED in color
(7 reviews) -
Wheelers Off RoadOn Sale All November!!
Wheeler’s Rear Tacoma U-Bolt Flip Kit + SuperBumps for 2005-2023 Tacoma
- Suits 2005-2023 Toyota Tacoma 4×4 and Prerunner
- Provides increased ground clearance under the axle by flipping the U-bolts upwards
- U-bolt mounting Plates are Clear Zinc-Coated and 3/8″ Thick
- Threaded Holes are 3/8″-16 with a 4″ Spread
- Includes (4) Zinc-Coated 1/2″ Grade 5 U-bolts (8.75″ Long) with Zinc-Coated Hardware
- Includes SuperBump Micro-Cellular Polyurethane Progressive Bump Stop Set
- Installation Instructions
(9 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons Billet Aluminum Adjustable UCA’s Pair | Toyota Tacoma 2005-23
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
- Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered Here
(9 reviews) -
Replacement BushingsOn Sale All November!!
Dobinsons Upper Strut Bushing Kit – For -222 -221 -220 -574 -700
- Dobinsons replacement upper strut bushing kit with washers
- Suits a variety of Dobinsons struts, part numbers ending in -222 -221 -220 -574 -700
- Full list of part numbers this fits is below
- This is for 2 upper bushings and washers only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes
(0 reviews) -
Replacement BushingsOn Sale All November!!
Dobinsons Lower Strut Bushing – For -222 -220 -221 -782 -470
- Dobinsons replacement lower strut bushing
- Suits a variety of Dobinsons struts/shocks, part numbers ending in -222 -220 -221 -782 -470
- Full list of part numbers this fits is below
- This is for a single bushing only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes of the bushing type
(0 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Timbren ABSOSR Active Off Road Rear Bump Stops | Toyota Nissan Chevy
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 2005-2023 Tacoma (using standard u-bolts), 2000-2021 Toyota Tundra, 2005-2023 Nissan Frontier, 2015-2024 Chevy Colorado
- Click here for instructions
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90P00 (1/2″ spacer)
- A25723-90AH00 (1″ spacer)
(13 reviews) -
SuspensionOn Sale All November!!
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
DobinsonsOn Sale All November!!
Dobinsons Tacoma Add-A-Leaf to L59-110-R leaf pack Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-110-R to L59-111-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
(6 reviews) -
Add-a-LeafOn Sale All November!!
Wheeler’s 3 Leaf Progressive Add-A-Leaf Set – 1.5″ Lift | 95-23 Tacoma 99-06 Tundra
- Suits 1995-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Includes 2 x Progressive add-a-leaf sets (3 leaves each), 2 longer center pins and replacement longer U-bolts
- Adds 1.5″ of lift approximately. Different bed/cab configurations could see variations in lift height
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature 60mm diamond cut ends and anti-friction pads for smooth, squeak free performance
- On some years and/or models, you may need to remove the front clamp from the Add-A-Leaf to avoid interference with the overload spring and gas tank strap
- Instructions
(6 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Toyota Tacoma Firestone Airbag & Daystar Cradle Bundle
- Suits 2005-2023 Toyota Tacoma 4×4 Trucks
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions
- Firestone Airbag Kits do not have a warranty when used with Daystar Airbag Cradle Kit
- Enjoy full suspension travel and the benefits of air bags with the Daystar Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough Daystar polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Your Daystar Air Bag Cradle Kit is backed by a Lifetime Warranty
- Daystar cradle mounts to top of leaf spring, airbag mounts to frame above only
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Dirt King Fabrication
Dirt King Performance Diff Drop Kit for Toyota and Lexus
- Complete Diff Drop Kit
- Lowers front diff by 1.0″
- Reduces CV angles on lifted trucks
- Reduces wear on CV boots
- Includes spacers and longer bolts for skid plate re-installation
- Made in the USA
Suits the following vehicles:
- 2005-2023 Toyota Tacoma 2nd and 3rd Gen
- 2003-2024 Toyota 4Runner 4th and 5th Gen
- 2006-2014 Toyota FJ Cruiser
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
(6 reviews) -
SuspensionOn Sale All November!!
Dobinsons 30mm (1.2″) Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only designed to be used with OE height leaf springs
- Built-in correction for pinion angle
- Full vehicle range is listed down below
- Installation Instructions
(7 reviews) -
DobinsonsOn Sale All November!!
Dobinsons Tacoma Front Coils Options | Toyota Tacoma 4×4 2005-2023 – Pair
- Choose what coil suits your vehicle and needs the best
- All specs listed are for 4×4 Dual Cab Short or Long Beds
- Sold as a Pair
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- Note: Access Cab models come with 1″ lift from the factory. Deduct 1″ lift from the lifted heights, or add longer/taller struts to regain that 1″
- C59-238 – 0-1/4″ lift Closest to stock height
- C59-300 – 1″ Lift with stock front end
- C59-302 – 1.6″ Lift stock front end, 1.25″ with light bumper OR winch
- C59-314 – 2″ lift stock front end, 1.75″ with 100LBS
- C59-350 – 1.5″ to 1.75″ with 200-240LBS, 2″ with stock weight (heavy rate)
- C59-352 – 2″ lift with 180-220 lbs, or 2.4″ with stock weight (heavy rate)
- C59-354 – 2.4″ lift with 180-220LBS, or 2″ with 280-300LBS (heavy rate)
- C59-318 – 3.0″ lift with 110-220LBS (heavy rate)
(12 reviews)