Your cart is currently empty!
Shop
Showing 451–480 of 2002 resultsSorted by popularity
-
80 Series Land Cruiser (1990-1997)Dobinsons C97-145VTB Dual Rate Rear 3.5″ Coils | 80 Series 1990-1997 (Black) – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 3.5″ with full rear bumper, tire carrier, roof rack, drawers, 2nd tank, etc. Lifts more without as much weight added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
(19 reviews) -
Full Suspension Kits - Tundra 3rd GenFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRR Tundra Lift Kit | 2022-2025 (2-3″)
- Dobinsons MRR suspension kit for your 2022-2025+ Tundra
- Specs are for the non-Hybrid model
- Hybrid Models lift 1-1.5″ less lift than listed here
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Front Resi Installation
- Installation Note: Transfer over the rear OEM coil isolators from the stock coils to these to prevent coil slap
- If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- **Not compatible with factory rear airbag suspension
- Standard Coil seat height for MRA59-A446 should be set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
(7 reviews) -
Brake LinesFREE SHIPPING
within 48 US StatesPerformance Front Brake Lines for Tacoma 05-23 Tundra 99-06 FJ Cruiser 07-14 (BLACK)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- Increase your brake pedal feel with stainless brake lines to replace the factory rubber brake lines
- Stock length, works with or without a suspension lift
- Suits the following vehicles: Toyota Tacoma 2005-2023, Toyota Tundra 1999-2006, FJ Cruiser 2007-2014
- Sold as a pair with new retaining clips
- Photo for illustration purposes only
- This set is BLACK in color
(26 reviews) -
Brake LinesFREE SHIPPING
within 48 US StatesExtended Rear Brake Lines +2″ for Toyota Tacoma 2005-2023 (Black)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 2″ longer than stock for most suspension lifts (not long travel)
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with a non-lifted truck, or with any lifted truck where the shocks aren’t long travel
- Sold as a pair with new retaining clips
- This set is BLACK in color
(6 reviews) -
Full Suspension Kits - Tundra 2nd GenFREE SHIPPING
within 48 US StatesDobinsons 2.25-3.0″ Pre-Assembled IMS Coilovers for Toyota Tundra 2007-21 4×4
- Suits Toyota Tundra 2007-2021 4×4 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Tundra? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by an adjustable circlip. Springs must be compressed to change the clip height
- All are assembled at the standard lowest clip height
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 615mm extended, 445mm compressed strut lengths
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Tundra IMS coilovers use a slightly different coil seat as shown in secondary photos
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Add an optional lean correction spacer for the driver’s side here
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(5 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front Toyota Tacoma Big Brake Kit for 2005-2023
2005-2023 Toyota Tacoma Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- For 6-Lug models only (Pre-Runner and 4×4 models)
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(9 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Fog Light Kit for Dobinsons Bumpers
- Suits:
- BU59-5559 Toyota Tacoma Bull Bar
- BU59-5557 Toyota 4Runner Bull Bar
- BU59-5558 Toyota Tundra Bull Bar
- Includes Fog Light Bulbs and Wiring Harness
- Rating IP68
- 12V Halogen Bulbs
- 1 Kit needed per vehicle
(3 reviews) - Suits:
-
100 Series Land Cruiser IFS (1998-2007)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable 100 Series MRA Kit | Land Cruiser IFS V8 Gas 1998-2007
- For 1998-2007 Land Cruiser 100 Series and Lexus LX470
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- By default, no rear coils are included, but you can easily select and add them
- You can also remove the torsion bars if you don’t want those
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- 3-way adjustable valving shocks – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
- Standard Kit Includes 2 Front MRA Shocks, 2 Front Torsion Bars, 2 Rear MRA Shocks, and 2 Rear Coil Springs – select your preferences
(8 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-244 2.5″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair
- Dobinsons C59-244 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96
- Lifts 2.5″ with bumper AND winch weight of 110-150lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(7 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60685 Rear 2.6″ IFP Shocks Pair | 80 Series (6″ lift) + Tundra
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97 with 6″ of Lift or for Long Travel use and 2022-2025+ Toyota Tundra for Long Travel
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 730mm extended, 446mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(12 reviews) -
Long Range Tanks
Lexus GX470 & 4th Gen 4Runner Long Range Auxiliary Fuel Tank (24gal) 2003-2009
- Suits Lexus GX470 (all years) and 4th Gen 4Runner (all years 2003-2009), works without KDSS and without air suspension
- This is an additional tank that goes behind the rear axle, it holds 24 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 24 gallon capacity, fits in the void behind the rear axle and in front of the rear bumper, requires relocation of the stock spare tire
- 24 gallon size is a redesign of the 33 gallon, to maintain better clearance under the tank
- 24 gallons plus your original 23 gallon tank gives you a capacity of 47 gallons in total!!
- SPLIT FILL – Single fill point with no diversion – fuel flows into both tanks until both are full
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Spare tire must be relocated
- Fitting time – approximately 5 hours
- Does not suit KDSS models and does not suit air suspension models
- Part Number TL470GXA24-US
- Intended to be installed by a certified mechanic
- Installation Instructions
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME Heavy Duty Torsion Bar Pair for Land Cruiser 100 Series V8 1998-2007
- For V8 Gasoline/Petrol powered Land Cruisers from 1998 to 2007 and Lexus LX470
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(7 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-651 Rear Twin Tube Shocks Pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- See list of suitable vehicles down below
- 591mm extended, 363mm compressed
- 60mm diameter outer tube size
(10 reviews) -
Sequoia 1st Gen (2001-2007)FREE SHIPPING
within 48 US StatesDobinsons 0-2.5″ Sequoia IMS Suspension Kit for 2001 to 2007 4.7L V8
- For Toyota Sequoia 2001 to 2007 models, lift 0-2.5″ depending on options chosen
- Adding preload with the adjustable height IMS struts gives you 2.5″ of lift, or set to the standard coil seat height for 1.75-2″ of lift
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged IMS Shocks, Superior Design, thicker walls, longer travel
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
(13 reviews) -
ARB
ARB 171302V2 Air Inflation Hose Kit for Air Compressors
- Kit Includes: 1 x High heat pressure hose (18ft long), 1 x ARB air chuck with quick press fitting, 1 x ARB T-fitting for use with the CKMA12 ARB air compressor, an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
- For use with Air Compressor to fill up deflated tires after a day on the trail.
- Optional pump up kit allowing you to use your CKMA12 Compressor and the new CKMTA12 and CKMTA24 TWIN compressors to quickly plug in a heavy duty airline and air up tires after a day on the trail or fill up after patching a flat tire.
- Designed by ARB engineers for maximum air flow
- it has line protectors on the end, which helps from kinking, and makes the hose last a long time.
(7 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-545 3″ HD Land Cruiser 200 Series Rear Coils – Pair
- C59-545 – 4″ lift with stock weight, 3″ lift with 220 LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/470mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(7 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tacoma 2nd Gen (2005-2015)
Dobinsons 2″ to 3″ Lift Kit Toyota Tacoma 2005-2015 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select front coils based on front end accessory load and lift height
(10 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons 80 Series Snorkel Kit for Land Cruiser 1990-97
- 80 Series Snorkel Kit – Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997 models
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(9 reviews) -
4Runner 5th Gen (2010-2024)
1/2″ Rear Coil Spacer Single | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4th Gen 4Runner – 2003 to 2009, Toyota 5th Gen 4Runner – 2010 to 2024, Toyota FJ Cruiser – all years, Lexus GX470 – all years, Lexus GX460 – all years, Toyota Prado 120 – all years, Toyota Prado 150 – all years
- Sold Individually
- Long lasting – hard durometer polyurethane
- Easily add rear lift or fix leaning issues
- Optional- bolt to the coil bucket for easy installation. We have noticed that it can be difficult for customers to install other brands, as they tend to slide around while you are trying to reinstall the spring. Bolting it to the coil bucket eliminates that issue.
- Do not stack
- Fits any OE style spring – Top Cone isolator- Apache, Dobinsons, Ironman, OEM, Old Man Emu, Alldogs Offroad, etc.
- NOT compatible with Eibach rear lift springs used in their air to coil conversions – GX470/460 etc.
- Cone Isolator shown in picture not included
- Airbag Models will need to convert for coil springs for these to work
(10 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-223VB Rear Coil Springs | Land Cruiser – Pair Black
- 80 SERIES (1990-1997) and Lexus LX450 – Dobinsons c59-223v – 1.75″ lift with up to 220lbs weight
- 100 SERIES (1998-2007) and Lexus LX470 – Dobinsons C59-223V – 1-1.25″ lift, variable rate, with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 19mm wire diameter, 445/455mm free height, variable rate
- Sold in Pairs
(0 reviews) -
Air SolutionsFREE SHIPPING
within 48 US States4 Piece Adjustable Tire Deflator Kit – 10-30 PSI
- Adjustable Pre-Set From 10-30 PSI
- Easy Twist Adjustable Design
- Super Slim Design to fit into aftermarket wheels easier
- Compact and Precise
- Deflators will automatically Stop at the Preset PSI
- Includes Storage Bag
- Kit of 4, you can deflate 4 tires at the same time
(13 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro Complete CV Boot Kit | Toyota 4Runner 1996-2002
- Complete CV boot replacement kit – Suits 1996-2002 3rd Gen Toyota 4Runner 4×4
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(25 reviews) -
Rear Drawers
Dobinsons Rear Drawer Divider – Suits Wide Sizes
- 1.6mm Zinc Plated Robust Steel Construction
- Sold individually
- Marine Carpet Covering
- Easy installation with 4 pre drilled holes
- Suits RD80-1000 and RD80-1003 model drawer sizes
(3 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-146VTB Dual Rate Front 2.5″ Coils | 80 Series 1990-1997 (Black) – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 2.5″ with 200LBS front end constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
(10 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-147VTB Dual Rate 2.5″ Rear Coils | 80 Series 1990-1997 (Black) – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Lifts 2.5″ with 400LBS rear constant load. Lifts more with less weight on the vehicle
- Also made in the teal color
(15 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Tubular UCA Pair | Land Cruiser 100 LX470 1998-2007 – No Ball Joints
- For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
- This purchase does not include any ball joints. Use OEM or aftermarket OE sized upper ball joints
- Not compatible with AHC, it does not have the bracket in place
- Includes both left and right hand side arms, OE style rubber frame bushings installed in the arms, all joint caps, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Product Video
- Also available with ball joints installed, here
- Replacement Ball Joints can be ordered here
(8 reviews) -
Bronco (2021-2025+)
Dobinsons Ford Bronco Rear Coils | C19-569V – Pair
- Dobinsons C19-569V Suits Ford Bronco:
-
- 4 Door – BL, Wildtrack, First Edition – 150-350Lb Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50099
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(11 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesTimbren Active Off Road Rear Bump Stops | Tundra Sequoia LC250 Tacoma GX
- Suits the Rear of 2022-2025+ Toyota Tundra, 2023-2025+ Sequoia, 2024-2025+ Land Cruiser 250, Lexus GX550, 2024-2025+ Tacoma with coil springs
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops on the 2022 Toyota Tundra. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
(15 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Front Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser 1990-1997
- Complete Front hydro bump stop kit to replace the factory coil isolator and internal bump stops
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-012FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
(9 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022-2025+, Sequoia 2023-2025+, Land Cruiser 250 Series 2024-2025+, and Tacoma 2024-2025+ and Lexus GX550 2024+
- Fully adjustable to properly set the length and pinion angle
-
On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
(4 reviews)
