Your cart is currently empty!
Shop
Showing 841–870 of 2002 resultsSorted by popularity
-
Bump Stops - 200 SeriesFREE SHIPPING
within 48 US StatesTimbren Bump Stops Front & Rear | 200 Series Land Cruiser 2008-2021
- Suits 2008-2021 Land Cruiser 200 Series
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORLC2 replaces the rear OEM bump stops and ABSTOF replaces the fronts on the Land Cruiser 200 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
(14 reviews) -
Skid Plates
RCI Tacoma Engine Skid Plate | 2005-2023 Tacoma
- Fits: 2005-2023 Toyota Tacoma
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- ALL Tacoma front skid plates now come standard with oil filter access door, an essential feature if you have a 2016 or newer truck, and also maintains compatibility on 2005-2015 models
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Designed to accommodate ALL vehicles with OR without differential drop kits, and does so without compromise.
- Differential cage provides unsurpassed protection, while allowing skid plate to sit tighter to vehicle than competitors
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN USA
(3 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
RCI Transmission Skid Plate | Tacoma 2005-2023
- Fits all Toyota Tacoma from 2005-2023
- *Fits 4×4 4.0L/3.5L Access Cab and Double Cab trucks only
- Protects transmission, second and third cross-members
- Excellent addition or replacement of light duty OEM skid plates (which do not provide any coverage of transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with OEM TRD PRO aluminum engine skid plate. No modifications required!
- Finish: Heavy Duty Black Powder Coat or Bare Aluminum
- Made in the USA
(4 reviews) -
270° AwningsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 270LTE Passenger Side 270 Degree Awning
- Passenger Side Mount
- The Overland Vehicle Systems Nomadic 270LTE Awning is the perfect solution for anyone in need of reliable, free-standing shelter.
- Made with quality materials, this awning provides up to 75 square feet of coverage and can be used at a full 270 degrees.
- The Overland Vehicle Systems Nomadic 270LTE Awning is both easy to set up
- The Nomadic 270LTE Awning is supported by 4 integrated drop-down legs, 4 integrated 1″1/8″ tubular heavy-duty rafters supported on a Heavy-Duty Aluminum Frame.
- The Nomadic 270LTE Awning is made from 280G poly cotton rip stop material with heat sealed seams, easily folds, and secures in a 1000g PVC cover.
- This Nomadic 270LTE awning features a universal “L” mounting bracket solution that can be mounted onto a variety of roof racks, making it perfect for your off-road rig.
- The awning comes with a 4-year warranty, ensuring your satisfaction.
(8 reviews) -
YJ Wrangler (1987-1995)FREE SHIPPING
within 48 US StatesKing 4WD Premium YJ Wrangler Soft Top w/ Tinted Windows, w/ Upper Doors 1987-1995
- Suits 1987-1995 Jeep Wrangler YJ 2-door soft top convertibles – full roof with half door windows
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(7 reviews) -
Full Suspension Kits - Tundra 1st GenFREE SHIPPING
within 48 US StatesDobinsons 2-2.5″ 3-Way Adjustable MRA Lift Kit | Tundra 2000-2006
- Suits 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Adjustable height front struts, lift from 2″ to 2.5″
- Choose from no added rear lift, a Quick Ride block kit or Add-A-Leaf (AAL) Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front MRA Struts, 2 Rear MRA Shocks, 2 Front Coil Springs (a pair), and multiple Rear Lift Options
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel and alignment
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
(11 reviews) -
Full Suspension Kits - Frontier D41FREE SHIPPING
within 48 US States2022 Frontier Lift Kit Dobinsons 2-3″ 3-Way Adjustable MRA Kit | Frontier D41 2022+
- Complete Dobinsons MRA 3-Way Adjustable Suspension Kit for your 2022+ Nissan Frontier D41 Truck
- Choose what front and rear lift heights and load ratings you would like, as well as what parts you would like to include
- Nothing is included in the order if you don’t select it from below
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO 9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Photos show a full kit with many parts selected. If you don’t select a part from below, it is not included
(10 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesJeep Gladiator Overland Tailgate Table | 2019+
- The stock tailgate panel is a wasted opportunity that you can easily correct with the All-Pro Off-Road Overland Tailgate Table.
- The All-Pro Off-Road Overland Tailgate Table turns your opened tailgate into a multi-functional platform for all of your overlanding, camping, fishing, and hunting needs.
- The durable food-grade polyethylene cover can be used as a cutting board while supporting your favorite camp stove.
- A slot on the left side and cup-holders on the right side prevent items from rolling away.
- Requiring only basic hand tools, reusing original hardware, and 3-minutes of time, this is one of the easiest modifications you will ever make on your truck and one every Gladiator owner should do.
- Made in 4 different colors and 2 different styles, choose from the divided cutting board configuration, or the smooth configuration with only round cutouts on the end.
- Thickness is right at 1/2″
- Scroll down on the page to see a full product video!!
- Made in the USA, in sunny California!!
(6 reviews) -
Sale!Accessories
RCI FJ Cruiser Rock Sliders
- Fits: Toyota FJ Cruiser all years
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM is now standard on outer rails for uncompromised strength
- Fully gusseted on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and guarantees a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5 degree upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for top surface
- Easy install with only basic hand tools
- All hardware provided (grade 5 & 8 where applicable)
- Now comes standard with our signature low profile rear kickout
- Made to order from your selections below
- MADE IN USA
(5 reviews) -
Skid Plates
RCI Catalytic Guards | 2003-24 4Runner / FJ / GX
- REQUIRES RCI TRANSMISSION SKID PLATE FOR INSTALLATION
- Fits: 2003-2024 4Runner, FJ Cruiser (all years), GX470 and GX460 (all years)
- Protects exposed catalytic converters from on and off road debris
- Excellent addition to the RCI Transmission skid to aid in preventing catalytic converter thefts
- Vented design for adequate airflow and heat dissipation
- Smooth, flat surface that easily slides over obstacles
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing RCI Transmission skid, drilling may be required until manufacturing begins on pre cut out holes on Transmission skid plate
- Designed around the most current RCI transmission skid plate with 2in double bent side flange
- Requires RCI Transmission Skid Plate for installation
(2 reviews) -
200 Series Land Cruiser ARMORED
Dobinsons Front Monster Struts Pair for Armored Land Cruiser 200 Series XHD
- Made for Armored Vehicles ONLY – Level B6 or B7 Armored Toyota Land Cruiser 200 Series
- Mammoth 70mm body housing with a massive volume of high quality German shock oil
- 20mm Diameter heavy duty chrome piston rods
- 45mm Extra Large Pistons
- 4mm Heavy Duty Wall thickness, double the thickness of regular shock walls
- Threaded adjustable spring seat height for adjustment and additional heat dissipation
- 1 piece drop forged lower strut mount for maximum strength
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- See all suitable armored coil spring options HERE
- Sold in Pairs
(10 reviews) -
200 Series Land Cruiser ARMORED
Dobinsons C59-564 B7 800-900KG Armored Land Cruiser 200 Series Front Coils – Pair
- C59-564 – Front Coils for Level B7 Armor with 800-900KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
(4 reviews) -
Sequoia 3rd Gen (2023-2025+)
Dobinsons C59-853V Rear Coil Springs Pair
- Dobinsons C59-853V Rear Coils for the 2023+ Toyota Sequoia
- Lifts 3″ with 440LBS constant load on a standard model, and 2″ with 440LBS of constant load on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- This also fits the 2021+ Land Cruiser 300 Series, gives 50mm lift with 280-400KG constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks required, the factory shocks are not long enough to run with these coils
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(1 review)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
Full Suspension Kits - Tundra 2nd GenFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable Tundra 2.0″-3.0″ MRA Suspension Kit | 2007-2021
- Suits Toyota Tundra 2007-2021 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Coils are teal. Struts and shocks are black
- Front MRA Coilovers are assembled at the standard coil seat height
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Includes Reservoir Brackets and Hardware and Sticker Pack
- Full 2 year limited warranty, no set rebuild time period, fully rebuildable shocks
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
(12 reviews) -
Full Suspension Kits - 100 Series
Dobinsons 100 Series lift kit | Toyota Land Cruiser IFS DIESEL 1998-2007 (all shock options)
- Build a full suspension replacement here for your Toyota Land Cruiser 100 Series 1998-2007, with all possible options listed on this one page
- THIS PAGE IS FOR DIESEL ENGINE MODELS ONLY
- Lexus LX470 and Land Cruiser 100 Series share the same suspension parts
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A base kit includes 2 Front Shocks, Pair Front Torsion Bars, 2 Rear Shocks, and 2 Rear Coil Springs
- You can choose from twin tube, IMS Monotube or MRA 3-Way Adjustable Monotube shocks in the drop down menus
(10 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons 100 Series Torsion Bars Pair for DIESEL ONLY 1998-2007
- For DIESEL powered Land Cruisers from 1998 to 2007
- Total length is 1210mm, 34mm bar thickness
- These WILL NOT fit a V8 gas model Land Cruiser, they’re too long
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Comes as a set, 1 per vehicle
(2 reviews) -
-
Suspension
Dobinsons SD59-821 Big Bore Steering Damper – Toyota Pickup & 4Runner (1979-1985)
- Suits Pre-1985 Leaf Spring front end Toyota Pickup and Toyota 4Runner 4×4’s
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
(3 reviews) -
Ranger 2019+ (US Spec)
Dobinsons L19-132-R Leaf Springs Pair | Ford Ranger 2019+ USA Spec (40mm w/600LBS)
- Suits USA Spec Ford Ranger 2019-2022+
- L19-132-R lift 40mm (1.6″) over stock height with 600LBS of added constant weight – lifts more with less weight
- Pack has 7 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Photo for illustration purposes only, not of actual part number
(5 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front 3rd Gen 4Runner Big Brake Kit 1996-2002
1996-2002 3rd Gen 4Runner Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(6 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sale!Bronco (2021-2025+)
RCI Ford Bronco Aluminum Roof Rack | 4-door Hardtop 2021+
- Suits Ford Bronco 4-door Hardtop models 2021+ (will not fit soft top models or 2-doors)
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, RotoPax, spare tire, bike mounts, roof baskets, etc.
- Unique design allows removal of all three front roof panels with the rack in place
- Side panels feature removable filler panels for a superior finished look (simply take them off when you want to remove the roof, or leave them off if you prefer!)
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
- All aluminum components undergo a CNC deburring process to eliminate sharp edges for a high end, finished appearance
- T-Slot comes machined to accept 1/4″ nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Front fairing designed to accommodate up to a 42″ light bar
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes clamp system and OEM Ford mounting studs to secure to the truck
- Includes a filler piece for each side for a completed look that can be uninstalled in order to take off roof panels without removing the rack
- Rack is less than 4″ above highest point of the truck
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs 54lbs
- Made in the USA
- See the Video below to show how the roof panels come off with the rack installed
(5 reviews) -
Sequoia 1st Gen (2001-2007)FREE SHIPPING
within 48 US StatesDobinsons Stock Height Sequoia Suspension Kit for 2001 to 2007 4.7L V8
- Complete suspension kit for replacing the original Sequoia wearable suspension parts
- Coils are specifically suited to bring the ride height back up to original stock height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- New high performance IMS Monotube front and rear shock options are available to choose from
- If your vehicle has factory airbags in the rear, you’ll need to add the airbag conversion kit to run the new coil springs, option is below
(13 reviews) -
ARB
OME 303003 Torsion Bar Pair for Toyota 4Runner 1986-1995
- Suits the 1st and 2nd Gen Toyota 4Runner from 1986 to 1995 and Toyota Pickup/Hilux 1988-1995
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Sold as a set
- Specs: 1065mm long, 23.4mm bar thickness
(8 reviews) -
Overland Vehicle Systems (OVS)FREE SHIPPING
within 48 US StatesOverland Vehicle Systems Roof Top Tent & Awning Organizer
Tent Organizer Features:
- Color: Grey
- Pouches: 8
- C-Channel Mount: Yes, selected Overland Vehicle Systems Items
- Velcro Mount: Yes, universal and Mamba and Bushveld Roof Top Tents
- D-Ring Storage: Yes, 3
- Anchor Points: 2, Bottom Left and Right
- Body Material: 600D Rip Stop
(3 reviews) -
55 Series (1970-80)FREE SHIPPING
within 48 US StatesDobinsons GS15-639S Front Twin Tube Shocks Pair | Land Cruiser FJ55
- Front Twin Tube shocks for 1970-1980 Toyota Land Cruiser FJ55
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
(9 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons Drawers for 4th Gen 4Runner 2003-2009
- Suits Toyota 4Runner 4th Gen from 2003-2009 without rear A/C
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built-in Heavy-Duty Fridge Slide (The top of the left side drawer slides in and out)
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Installation of drawers may REQUIRE drilling and bolting through floor if suitable holes are not in the floor already
- Requires removal of any 3rd row seating or any sliding floor/deck
- Aluminum Edging Protection
- Heavy duty lockable latches
- Sliding portion is not changeable from one side to the other
- Not compatible with 3rd row seat installed
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal on a pallet for you to pick up, or you can add home delivery below. We will be in touch with that delivery address
(3 reviews) -
Dobinsons
Dobinsons Spare Tire Trash & Storage Bag
- Dobinsons Tire Trash & Storage Bag is the perfect solution for storing your trash and extra gear whilst out on the tracks
- Boasting a huge 70L capacity and removable divider to separate items
- Manufactured from 1680D PVC, with high quality buckles and zips
- Has a mesh bottom design to allow for draining of unwanted moisture and liquids
- Dobinsons Tire Trash & Storage Bag is designed to look good and built to last
- Also included: 10L Dry Storage Bag (Single)
(0 reviews) -
Full Suspension Kits - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesDobinsons 1-2.5″ 3-Way Adjustable MRA Coilovers for Toyota 4Runner 5th Gen 2010-2024
- Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- MRA59-A700 Travel – 560mm extended, 420mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
(4 reviews)
