Your cart is currently empty!
Shop
Showing 1111–1140 of 1944 resultsSorted by popularity
-
40 Series Land Cruiser Early (1960-1979)Dobinsons HJ45-7L-F Front Leaf Springs Pair for FJ/BJ40 FJ/BJ45 up to 1979
- Front Leaf Springs for the Toyota FJ/BJ40 and FJ/BJ45 up to 1979 with 25mm eyes
- 45mm front lift with 400LBS constant weight on an FJ40/BJ40
- 45mm front lift with stock front end weight on an FJ45/BJ45
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, leaf springs only
(5 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square HeadlightsFREE SHIPPING
within 48 US StatesDobinsons 2.5″ IMS Lift Kit Toyota Land Cruiser 1/90-5/93 LJ70/72/73/77 | 1994+ RJ70/73 KZJ 70/71/73/78
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement shocks for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Shocks are Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and IMS shocks. Add other parts below
(9 reviews) -
ARB
OME 2895E Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460 – Pair
- OME Part Number 2895E
- Bar Size : 17 mm
- Free Height : 375mm
- Number of Turns : 6.75
- Coil Weight (each): 5.4 Kg | 11.9 lbs
- Spring Rate : 260 lbs
- Sold in Pairs
(9 reviews) -
ARB
OME 2884 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2884
- Bar Size : 16.5mm
- Free Height : 390mm
- Number of Turns : 9.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
- These are NOT COMPATIBLE with the newer MT64 struts from Old Man Emu – They don’t fit
(13 reviews) -
Gladiator JT (2020-2024+)
Dobinsons C29-232V Front 3.0″ Lift Coils for Jeep Gladiator – Heavy Load – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck. Lifts 3.0″ with 100-200LBS front end constant weight (bumper, winch, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold as a Pair
(5 reviews) -
Dobinsons
Dobinsons JL JT Adjustable Front Lower Arms Pair | JL Wrangler Gladiator JT
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
- Comes with highly flexible rubber bushings installed
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- More details and installation instructions are down below
(4 reviews) -
JL Wrangler (2018-2024+)FREE SHIPPING
within 48 US StatesDobinsons IMS29-60737 Rear 2.6″ IMS Shocks Pair | Jeep JL Wrangler
- Fits Jeep Wrangler JL 2018+ 2-door and 4-door
- Suits vehicles with 2-3.5″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 732mm extended, 460mm compressed
(14 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS29-60736 Front 2.6″ IMS Shocks Pair | Jeep Gladiator & JL Wrangler
- Fits Jeep Gladiator JT 2020+ and Jeep Wrangler JL 2018+ 2-door and 4-door
- Suits vehicles with 2-3.5″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 682mm extended, 425mm compressed
(13 reviews) -
Dobinsons
Dobinsons TB21-1550 Heavy Duty Torsion Bar Pair for Isuzu Amigo + Passport – 1145mm (45.08″)
- You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
- TB21-1550 are 1145mm (45.08″), 30mm bar thickness
- Also may fit some Honda Passport models from 2/1999 to 2002, but be sure to measure your stock length first
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(4 reviews) -
Dobinsons
Dobinsons TB21-1547 Heavy Duty Torsion Bar Pair for Isuzu Amigo – 1000mm (39.37″)
- You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
- TB21-1547 are 1000mm (39.37″), 26mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(2 reviews) -
Pathfinder R51 (2005-2012)
Dobinsons GS45-643 Rear Shocks Pair | Nissan Pathfinder R51 2005-2012
- Suits Nissan Pathfinder R51 from 2005 to 2012 models
- Suitable for stock height up to 2.0″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
(8 reviews) -
WK2 Grand Cherokee (2011-2022)FREE SHIPPING
within 48 US StatesDobinsons IMS29-50732 Front IMS Struts Pair | Jeep Grand Cherokee WK2 2011-2015
- Fits Jeep Grand Cherokee WK2 from 2011 to 2015 – will not fit 2016+ as they use a different lower mount
- Does not suit Quadralift vehicles (air ride suspension)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- ****Coil seat should be set at 540mm(21.25″) from the strut bushing eye. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.*****
- Struts only, sold as a pair – the coils are sold separately
(15 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD129 Rear Air Locker Toyota 8.4″ 30 Spline
- For Use only with Toyota 8.4″ 12 Bolt 30 spline Rear Axle
- Suits multiple vehicles, the full list is down below. Used in older Tacoma, Sequoia, Tundra and T100 Trucks.
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(16 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD146 Rear Tundra Air Locker 5.7L V8 10.5″
- For Use only with Toyota Tundra 5.7L V8 REAR 2007 to 2021 with 10.5″ 12 Bolt Ring Gear and 36 spline axles
- Will not suit 4.6L or 4.7L engines, as they use a smaller rear differential (RD152)
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD121 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.73-
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.73 And Down Factory Gears
- Usually all models that came with a manual transmission used 3.73- factory gear ratios, but you must check before ordering
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are re-gearing, check with the gear manufacturer for which Air Locker to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421110 Under Vehicle Protection Kit | Toyota 4Runner 5th Gen (with KDSS)
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITH KDSS
- You must check to make sure you have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(9 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5423010 Toyota Tacoma Skid Plate Set | 2005-2023 4×4
- Suits all Toyota Tacoma 4×4 models from 2005 to 2023 (2nd and 3rd Gen)
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(11 reviews) -
-
ARB
ARB715LB Orange Snatch Strap Recovery 30′ x 4 1/3″ (33000 LB)
- A snatch strap is a Kinetic strap that stores energy to magnify the pulling power during a vehicle recovery
- Min. breaking strength: 15,000kg / 33,000 lb Specifically designed to stretch under load for maximum performance
- An ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present
- Length: 9m / 30 feet. Width: 110mm / 4 1/3″
- Material: 100 percent nylon, Elasticity: Stretch (genuine) 20 percent. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
- Reinforced Eyes. For vehicle recovery, a snatch strap is more suitable than a tow strap.
- All ARB snatch straps are woven and fabricated to ARB specifications, and tested by a NATA approved laboratory
- Part no. ARB715LB
- Min. breaking strength: 15,000kg / 33,000 lb
- Length: 9m / 30 feet
- Width: 110mm / 4 1/3″
- Elasticity: Stretch (genuine) 20%
- Material: 100% nylon
- Reinforced eyes: yes
- Eye & seam protector sleeves: yes
(12 reviews) -
ARB
ARB505 E-Z Deflator Kit 10-60 PSI Rapid Air Down Offroad Kit
- Corrosion resistant brass/stainless deflator tool
- Fully geared, solid brass precision movement
- Protective rubber gauge guard
- Easy to read dial with one PSI increments
- Includes updated canvas pouch for storage
- Original analog design, newer digital version is now also offered
(10 reviews) -
Sale!15% off Year End SaleAdd-a-Leaf
Wheeler’s 1.5″ Lift Add-A-Leaf Set for 1996-2004 Tacoma
- Suits 1996 to 2004 Tacoma 4×4 and Pre-Runner
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 1.5″ of lift approximately on dual cab short bed models. Single or Access cab models may see different lift heights
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
(9 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Toyota Land Cruiser 100 Series 1998-2004 Long Range Auxiliary Fuel Tank (40gal)
- Suits Toyota Landcruiser 100 Series 1998-2004 with the any engine option, gas or diesel
- This is an additional tank that goes where the factory spare tire sat, it holds 40 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 40 gallon capacity, fits where OE spare tire sat (requires spare tire relocation)
- 40 gallons plus your original 25 gallon tank gives you a capacity of 65 gallons in total, or you can also add the LRA replacement tank which is 40 instead of 25 gallons, bringing total capacity up to 80 gallons!!
- Tank fills using OEM gas door with supplied dual filler neck, custom made by LRA
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- 24 gallon tank is built the same as the 40gal, but with better clearance and departure angle (hangs down less) – Click here to see that tank
- Part Number TLC100AX-US
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
80 Series Land Cruiser (1990-1997)
Toyota Land Cruiser 80 Series 1991-1997 Long Range Replacement Fuel Tank (1FZ Gas)
- Suits Toyota Landcruiser 80 Series 1991-1997 and Lexus LX450 with the 1FZ Gas Engine
- For US-spec 80 series with a single original tank (not dual tanks)
- Replacement tank – 37 gallon capacity replaces original 25 gallon tank
- Fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 5 hours
- Part Number TLC80FR-PA-US
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
60 62 Series Land Cruiser (1980-1989)
Toyota Land Cruiser 62 Series 1988-90 Long Range Replacement Fuel Tank (EFI USA Spec)
- Suits Toyota Landcruiser 62 Series Wagons 1988-1990 with EFI engine
- Replacement tank – 40 gallon capacity replaces original 23.8 gallon tank
- Fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 3 hours
- Part Number TLC602RE
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
Explorer U502 AWD 2012+
Dobinsons C19-439 2″ Lift Rear Coils for Ford Explorer U502 2012-21 AWD 3.5L 3.7L – Pair
- 2″ rear lift coils for a Ford Explorer AWD 3.5L and 3.7L from 2012-2021
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(4 reviews) -
Explorer U502 AWD 2012+
Dobinsons C19-438 2″ Lift Front coils for Ford Explorer U502 2012-21 AWD 3.5L 3.7L – Pair
- 2″ front lift coils for a Ford Explorer AWD 3.5L and 3.7L from 2012-2021
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(5 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Tacoma Snorkel SS171HP – Tacoma 2nd Gen 2005-2015
- Suits Toyota Tacoma 2005-2015 Models – 2nd Gen Tacoma
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions.
- Vehicle specific design and factory airbox adaption fitment.
- Manufactured using durable, UV stable cross linked polyethylene material.
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets.
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream.
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
(25 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-549 2″ UHD Land Cruiser 200 Series Rear Coils – Pair
- C59-549 – 2″ lift with 1100LBS+ constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 510/485mm free height, 297LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(6 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
Coil Springs
Dobinsons C45-422 Front 30mm lift Coil Springs for Nissan Pathfinder 4×4 R52 – Pair
- C45-422 Front coils will lift 30mm over original height with the added weight of 110-180LBS of constant weight, such as a bumper or winch
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil springs for this vehicle
(5 reviews) -
Tacoma 2nd Gen (2005-2015)
RCI Tacoma Rock Sliders | 2005-2015 Tacoma
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Fits 2005-2015 4wd access cab and double cab trucks
- Made to order from your selections below
- Made in USA
(4 reviews)
