Your cart is currently empty!
Search results: “long travel coils” – Page 2
Showing 31–60 of 151 results
-
100 Series Land Cruiser IFS (1998-2007)Ships FREE !!
within 48 US StatesDobinsons MRA59-A786 MRA Extended Travel Adj Front Shocks | 100 Series (2-2.5″ Lift)
- Extended Travel Front Shocks for 100 Series and LX470 – these require a Diff Drop Kit and UCA’s to be installed for full articulation and to prevent axle binding
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Reservoir mounts to the empty holes forward of the shock on both sides
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
- 470mm extended and 315mm compressed
$1,350.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons IMS45-50648 Extended Travel IMS Struts | Nissan Frontier Xterra R51 Pathfinder (2-3″)
- IMS front struts for 2-3″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra (2005-2015), Nissan Pathfinder R51
- These extended travel struts REQUIRE aftermarket UCA’s for full travel
- SOLD IN PAIRS
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Length specs – 278mm compressed and 410mm extended
- Standard coil seat height setting is 106mm, or set to 119mm for an extra 1″ of lift
- Full 2 year limited warranty, no set rebuild time period
$650.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons 3-Way Adjustable Extended Travel Struts | Nissan Xterra Frontier Pathfinder R51
- MRA Extended Travel front struts for 2-3″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra 05-15, Nissan Pathfinder R51
- These extended travel struts REQUIRE aftermarket UCA’s for full travel
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Standard coil seat height should be set to 106mm from the center of the lower bushing eye to the bottom of the coil seat
- Length specs – 278mm compressed and 410mm extended
- FITTING INSTRUCTIONS
- Instructions on setting coil seat height
$1,280.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-147VT Dual Rate 2.5″ Rear Coils | 80 Series 1990-1997
- Lifts 2.5″ with 400LBS rear constant load. Lifts more with less weight on the vehicle
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
$485.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-145VT Dual Rate Rear 3.5″ Coils | 80 Series 1990-1997
- Lifts 3.5″ with full rear bumper, tire carrier, roof rack, drawers, 2nd tank, etc. Lifts more without as much weight added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
$485.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-147VTB Dual Rate 2.5″ Rear Coils | 80 Series 1990-1997 (Black)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Lifts 2.5″ with 400LBS rear constant load. Lifts more with less weight on the vehicle
- Also made in the teal color
$485.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-145VTB Dual Rate Rear 3.5″ Coils | 80 Series 1990-1997 (Black)
- Lifts 3.5″ with full rear bumper, tire carrier, roof rack, drawers, 2nd tank, etc. Lifts more without as much weight added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
$485.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-146VT Dual Rate Front 2.5″ Coils | 80 Series 1990-1997
- ifts 2.5″ with 200LBS front end constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
$485.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-144VT Dual Rate 3.5″ Front Coils | 80 Series 1990-1997
- Lifts 3.5″ with a heavy load front end (bumper, winch, 2nd battery, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
$485.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-144VTB Dual Rate 3.5″ Front Coils | 80 Series 1990-1997 (Black)
- Lifts 3.5″ with a heavy load front end (bumper, winch, 2nd battery, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
$485.00 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-146VTB Dual Rate Front 2.5″ Coils | 80 Series 1990-1997 (Black)
- ifts 2.5″ with 200LBS front end constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
$485.00 Add to cart -
4Runner 5th Gen (2010-2024)Ships FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons MRA59-A574 3-Way Adjustable MRA Extended Travel Front Struts
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, suitable for 2 – 3.5″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Extended Travel – 575mm at full extension, 420mm compressed
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
- Resi installation instructions
$1,280.00 Add to cart -
MRA Remote Resi 3-Way Adjustable MonotubeShips FREE !!
within 48 US StatesDobinsons MRA 2.6″ Universal Smoothie Shock – 10″ Travel Shock
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2520 – 10″ Travel Shock
- Extended Length: 29.45″ / 750mm
- Compressed Length: 19.48″ / 496mm
- Reservoir Length: 10″ / 250mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm
- MRA means Monotube Remote (reservoir) Adjustable
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
$625.00 Add to cart -
MRA Remote Resi 3-Way Adjustable MonotubeShips FREE !!
within 48 US StatesDobinsons MRA 2.6″ Universal Smoothie Shock – 12″ Travel Shock
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2522 – 12″ Travel Shock
- Extended Length: 33.42″ / 851mm
- Compressed Length: 21.48″ / 547mm
- Reservoir Length: 12″ / 300mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm
- MRA means Monotube Remote (reservoir) Adjustable
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
$650.00 Add to cart -
MRA Remote Resi 3-Way Adjustable MonotubeShips FREE !!
within 48 US StatesDobinsons MRA 2.6″ Universal Smoothie Shock – 14″ Travel Shock
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2524 – 14″ Travel Shock
- Extended Length: 38.49″ / 980mm
- Compressed Length: 24.0″ / 611mm
- Reservoir Length: 12″ / 300mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm
- MRA means Monotube Remote (reservoir) Adjustable
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
$675.00 Add to cart -
4Runner 4th Gen (2003-2009)Ships FREE !!
within 48 US StatesETA is Summer 2024Dobinsons MRA59-A220 3-Way Adjustable MRA Front Struts Extended Travel
- Suits 2003-2009 4th Gen 4Runner, 2006-2009 FJ Cruiser, 2005-2023 Tacoma (2nd and 3rd Gen Tacoma), Lexus GX470, Toyota Prado 120, and 2005-2015 Toyota Hilux Vigo
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Bolt-on Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Resi brackets bolt in between the stock front sway bar mount
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
- Resi installation instructions
$1,280.00 Add to cart -
Coil Springs - Lexus GX470
Dobinsons Rear Coil Spring Options for Lexus GX470 2003-2009
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- C59-323 – Stock height up to 1/2″ lift
- C59-599 – 3/4-1″ with stock weight
- C59-505 – 1.25-1.5″ with stock weight
- C59-325 – 1.75-2″ with stock weight
- C59-327 – 2″ with 200-400lbs weight
- C59-329 – 2″ with 400-800lbs weight
- C59-331 – 2″ with 800-1200lbs weight (teal only)
- C59-675V – 2.5″ variable rate long travel, stock weight
- C59-677V – 3″ variable rate long travel, 400-600lbs weight
- C59-701V – 3″ variable rate long travel, 600-800lbs weight
- C59-749V – 3″ variable rate long travel, 800-1000LBS super extra heavy
From $270.00 Select options -
Coil Springs - Lexus GX460
Dobinsons Rear Coil Spring Options for Lexus GX460 2010-2023
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- Vehicles with KDSS lifting 1.5″ or more should add a PS59-4025 trim spacer for the passenger side
- C59-323 – Stock height up to 1/2″ lift
- C59-599 – 3/4-1″ with stock weight
- C59-505 – 1.25-1.5″ with stock weight
- C59-325 – 1.75-2″ with stock weight
- C59-327 – 1.75″ with 200-400lbs weight, 2.25″ stock weight
- C59-329 – 1.75″ with 400-800lbs weight
- C59-331 – 1.75″ with 800-1200lbs weight (teal only)
- C59-675V – 2.25″ with stock weight – variable rate coil
- C59-677V – 3″ with stock weight, 2.5″ with 200-300LBS – variable rate coil
- C59-701V – 3″ with 300-600LBS of constant weight – variable rate coil
- C59-749V – 3″ with 600-800LBS or more of constant weight – variable rate coil
- C59-849V – 3″ long travel, requires 1000LBS minimum rear constant added weight – variable rate coil (TEAL ONLY)
From $270.00 Select options -
Dobinsons
Dobinsons Rear Coil Spring Options for Toyota 5th Gen 4Runner 2010-2024
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- C59-323 – Stock height up to 1/2″ lift
- C59-599 – 1.25-1.5″ with stock weight
- C59-505 – 1.75-2.0″ with stock weight
- C59-325 – 2.25-2.5″ with stock weight
- C59-327 – 2″ with 200-400lbs weight
- C59-329 – 2″ with 500-800lbs weight
- C59-331 – 2″ with 800-1200lbs weight (teal only)
- C59-675V – 3″ long travel, stock weight
- C59-677V – 3″ long travel, 200-400lbs weight
- C59-701V – 3″ long travel, 500-600lbs weight
- C59-749V – 3″ long travel, 800-1000LBS super extra heavy
- C59-849V – 3″ long travel, requires 1000LBS minimum rear constant added weight
- Coil specs are down below
From $270.00 Select options -
Coil Springs - 4th Gen 4Runner
Dobinsons Rear Coil Spring Options for Toyota 4th Gen 4Runner 2003-2009
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- C59-323 – Stock height up to 1/2″ lift
- C59-599 – 3/4-1″ with stock weight
- C59-505 – 1.25-1.5″ with stock weight
- C59-325 – 1.75-2″ with stock weight
- C59-327 – 2″ with 200-400lbs weight
- C59-329 – 2″ with 500-800lbs weight
- C59-331 – 2″ with 800-1200lbs weight (TEAL ONLY)
- C59-675V – 2.5″ long travel, stock weight
- C59-677V – 3″ long travel with stock weight, 2.5″ with 200-400lbs weight
- C59-701V – 3″ long travel, 300-600lbs weight
- C59-749V – 3″ long travel, 800-1000LBS super extra heavy
- C59-849V – 3″ long travel, 1000LBS+ constant rear load (TEAL ONLY)
- Coil specs are down below
From $270.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons Front Coil Spring Options | Land Cruiser 80 series 0-6″ Lift
- Sold in Pairs
- Choose what coil suits your vehicle and needs the best
- Dobinsons C59-210V Stock Height Progressive Rate
- Dobinsons C59-234 2.0″ Lift Comfort Ride
- Dobinsons C59-220V 2.0″ Lift Progressive Rate with 0-110LBS Load
- Dobinsons C59-222V 2.0″ Lift Progressive Rate with 110-220LBS Load
- Dobinsons C97-146VT 2.5″ Lift Variable Tapered Long Travel Heavy Load
- Dobinsons C59-166 2.5″ Lift no Load, 2.0″ with up to 220LBS Load
- Dobinsons C59-612V 3″ Lift Flexi up to 220LBS Load
- Dobinsons C97-144VT 3.5″ Lift Dual Rate 220LBS+ Heavy Load Long Travel
- Dobinsons C59-176 3.0″ Lift with 110LBS Load
- Dobinsons C59-170 3.0″ Lift with 220LBS Load
- Dobinsons C59-614V 4″ Lift Flexi up to 220LBS Load
- Dobinsons C59-308 4.0″ Lift 110-160LBS Load
- Dobinsons C59-312 4.0″ Lift with 200-300LBS Load, 5-6″ with Stock weight
- Dobinsons C59-310 6.0″ Lift with 220LBS
- Click HERE to see the REAR coil options
From $270.00 Select options -
GX470 (2002-2009)Ships FREE !!
within 48 US StatesETA is Summer 2024Dobinsons 1-3.5″ Pre-Assembled MRA GX470 Coilovers
- Suits Lexus GX470 – all years 2003-2009
- Looking for a quick and easy way to lift your GX470? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
$1,795.00 Select options -
Dobinsons
Dobinsons 2-2.5″ Pre-Assembled IMS Coilovers for Toyota 4Runner 3rd Gen
- Suits 1996-2002 Toyota 4Runner 3rd Gen 4×4 Models
- Looking for a quick and easy way to lift your 3rd Gen 4Runner? This is your answer
- Extended Travel IMS59-50222 Coilovers – 473mm extended, 335mm compressed lengths
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
- Link to Matching rear shocks
$1,165.00 Select options -
Full Suspension Kits - FJC EarlyBack in Stock Now!!
Dobinsons 1.5-3.5″ Pre-Assembled IMS FJ Cruiser Coilovers for 2006-2009
- Suits Toyota FJ Cruisers from 2003-2009 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and load rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
$1,165.00 Select options -
Full Suspension Kits - 4th Gen 4runnerBack in Stock Now!!
Dobinsons 1-3.5″ Pre-Assembled IMS Coilovers for Toyota 4Runner 4th Gen
- Suits 2003-2009 Toyota 4Runner 4th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
$1,165.00 Select options -
FoxShips FREE !!
within 48 US StatesFOX 2.0 Performance Series Coilover IFP Shock – 985-02-002
- Application: Toyota Tacoma 2005-2023 (0-2″), Toyota FJ Cruiser 2006-2009 (0-2″), Toyota 4th Gen 4Runner 2003-2009 (0-2) – see full list down below
- Sold Individually – You will need to order 2 for one vehicle
- Preassembled with coil and strut mount – full assembly ready to bolt in
- Coilover comes preset to the taller lift height right out of the box
- Includes a 600LB spring rate coil
- Can not be used with any Dobinsons coils
- Body: 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time
- Body Plating: Clear-anodized for a durable finish
- Reservoir: Internal IFP mono-tube reservoir design
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Shaft: 5/8″ hard chrome plated heat-treated alloy steel
- Piston: Race-developed high-flow piston design
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: Large diameter, heavy-duty spherical
- Adjustments: Ride height preload ring
- Extended: 21.190″
- Compressed: 16.600″
- Travel: 4.590″
- Top Mount: OEM
- Bottom Mount: Eyelet
- Installation Guide
- Link to order Fox Spanner Wrench to adjust 2.0 Coil Overs
- Exploded View Diagram
- Warranty Information
- Sold Individually – You will need to order 2 for one vehicle
$549.95 Add to cart -
FoxShips FREE !!
within 48 US StatesFOX 2.0 Performance Series Coilover IFP Shock – 983-02-051
- Application: Toyota 5th Gen 4Runner 2010-2024 (0-2), Toyota FJ Cruiser 2010-2016 (0-2″), Lexus GX460 (all years) – see full list down below
- Sold Individually – You will need to order 2 for one vehicle
- Preassembled with coil and strut mount – full assembly ready to bolt in
- Coilover comes preset to the taller lift height right out of the box
- Includes a 600LB spring rate coil
- Can not be used with any Dobinsons coils
- Body: 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time
- Body Plating: Clear-anodized for a durable finish
- Reservoir: Internal IFP mono-tube reservoir design
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Shaft: 5/8″ hard chrome plated heat-treated alloy steel
- Piston: Race-developed high-flow piston design
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: Large diameter, heavy-duty spherical
- Adjustments: Ride height preload ring
- Extended: 21.775″
- Compressed: 16.600″
- Travel: 5.175″
- Top Mount: OEM
- Bottom Mount: Eyelet
- Installation Guide
- Link to order Fox Spanner Wrench to adjust 2.0 Coil Overs
- Exploded View Diagram
- Warranty Information
- Sold Individually – You will need to order 2 for one vehicle
$549.95 Add to cart -
GX470 (2002-2009)
Dobinsons 1″ to 3.5″ Lift Kit for Lexus GX470 (All Options)
- Full Dobinsons Complete Suspension kit for Lexus GX470 from 2003 to 2009, with every possible option listed on one page
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
- Select the type of struts and shocks you want as well as all possible add-ons down below
- Choose from Dobinsons Classic Twin Tube shocks, IMS Monotube, or MRA 3-way adjustable remote resi shocks
- See note below in description about KDSS models
From $1,200.00 Select options -
4Runner 3rd Gen (1996-2002)Ships FREE !!
within 48 US StatesETA is July 2024Dobinsons 2-2.5″ Pre-Assembled MRA 4Runner Coilovers for 1996-2002
- Suits 1996-2002 Toyota 4Runner 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
- Link to matching rear shocks
$1,795.00 Select options -
Full Suspension Kits - GX460
Dobinsons 1.5-3.5″ Pre-Assembled Twin Tube Lexus GX460 Coilovers
- Suits Lexus GX460 4×4 Models 2010-2023, with or without KDSS
- Set of twin tube coilovers for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Choose the appropriate coils to match the lift height you want that also suits the added weight you have on the vehicle
- Nitrogen Gas Charged Struts, Superior Design, thicker walls, longer travel
- Direct Bolt-in Replacements, Pre-Assembled and Ready To Go
- 32mm Bore Size, Double Chromed 18mm Rod
- 51mm Body Size
- High Quality Fuch’s German Shock Oil
- NOK Multi-Lip Seals
- Teflon Piston Rings
- Natural Rubber Bushings for the Best NVH Dampening
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Built to order
- Lift heights are subject to variations in vehicle years as well as accessory weights, engine differences, and other variables.
From $865.00 Select options