Your cart is currently empty!
Suspension
Showing 361–390 of 1481 resultsSorted by popularity
-
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons IMS Leveling Kit Toyota 4Runner 2010-24
- Leveling Kit for upgrading the performance of your vehicle with new Dobinsons IMS struts and shocks
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- A stock 4runner comes from the factory with 2″ of rake (the rear is 2″ higher than the front). To completely level the vehicle and remove all rake, you would lift the front 2″ and leave the rear stock. It is recommended to leave 1″ of rake though to be able to carry a car full of people or loaded up for camping, etc. It is not advisable to leave the rear lower than the front.
- Can reuse the OE coils, or upgrade to Dobinsons
- Recommended would be 1-1.5″ up front and stock height rear
- Standard IMS coil seat height should be set to 213mm (8.39″). Every 1/4″ added beyond that adds 1/2″ of lift height measured at the wheel.
- Nitrogen Gas Charged Monotube IFP Shocks, Superior Design, thicker walls, longer travel
- IFP – Internal Floating Piston for excellent ride quality from the shocks
- Optional High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
- Base Kit Includes 2 Front IMS Monotube Struts, 2 Rear IMS Monotube Shocks
- Suspension Installation Video
(10 reviews) -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-111-R leaf pack Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-111-R to L59-112-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
(7 reviews) -
Dobinsons
Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-75)
- Used in place of original leaf bolt when adding a leaf
- Fits L59-111-R-R3 & L59-112-R-R5 ONLY
- Sold individually
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Requires lifted leaf springs to ensure proper fitment
(7 reviews) -
Dobinsons
Dobinsons IMS and MRR Adjuster Rings (Pair) for 56mm body
- Pair of anodized adjuster rings
- Suits 56mm body sizes only
- For Toyota 4Runner, FJ Cruiser
- For Lexus GX470 and GX460
- Some vehicles use larger 66mm rings for the bigger body size
- Available in black or purple
(15 reviews) -
SPCFREE SHIPPING
within 48 US StatesSPC 25455 | UCA’s for Toyota Land Cruiser 100 Series & Lexus LX470 Pair 1998-2007
- Suits 1998-2007 Toyota Landcruiser 100 Series and 1998-2007 Lexus LX470
- Compatible with or without AHC
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- We offer replacement ball joints as well
(13 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-540 1.4″ Land Cruiser 200 Series Front Coils – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 435/430mm free height, 19mm wire, 580LB rate
- Sold as a Pair
(17 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Suspension
Dobinsons SK45-054 Greasable Shackle Kit Pair for Nissan D40 D41 Frontier Xterra
- Suits Nissan Frontier D40 and D41 and Nissan Xterra (2005-2015)
- 90 degree greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo is of exact product.
- Also available with 1″ of lift
(6 reviews) -
Suspension
Dobinsons PB59-1033K Rear Greasable Poly Bush Kit for Toyota 1979-1989
- Suits Toyota 4Runner and Pickup 1979-1989 with leaf springs in the rear
- NOTE: Check Shank & Locating Bolt On Pin Flange Plate before ordering!!
- The shank must have the weird shape in the photo with the 2 small holes on it for these to work without extra parts
- If you have the regular bolt on the front end of the leaf springs, order PB59-1116K in addition to this kit
- For any lift height, or no lift. These are OE replacement bushings
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Photo not of actual bushings supplied in kit
(4 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons Rear Leaf Springs Options for Toyota Tundra 2007-21
- Suits Toyota Tundra 2007-2021
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride
(9 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-312 Front Coil Springs | Land Cruiser 80 Series 4.0″ Lift with 200-300LBS Load – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-312 are Front Linear rate coils to give 4.0″ of lift with 200 to 300 LBS of constant accessory weight,
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 560/570mm free height, 20mm wire, 314LBF/in rate
- Sold in Pairs
(13 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 80 Series Stock Height Restoration Suspension Kit 1990-1997 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
(18 reviews) -
Tundra 1st Gen (2000-2006)FREE SHIPPING
within 48 US StatesPerformance Rear Brake Line for Toyota Tundra 99-06 (BLACK)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- Increase your brake pedal feel with stainless brake lines to replace the factory rubber brake lines
- Works with 0-2″ of lift, 21.5″ long
- Suits the following vehicle: Toyota Tundra 1999-2006
- Sold as 1 piece with new retaining clip
- Photo for illustration purposes only
- This item is BLACK in color
(26 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons Adjustable Rear Lower Control Arms Pair | WA59-547K
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, 2023+ Toyota Sequoia, 2024+ Land Cruiser 250 Series, Lexus GX550
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Replacement Bushings
Dobinsons Upper Shock Bushing Kit – For -701, -705, -575
- Dobinsons replacement upper shock bushing kit with washers
- Suits a variety of Dobinsons shocks, part numbers ending in -701, -705, -575
- Full list of part numbers this fits is below
- This is for 2 upper bushings and washers only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes of the bushing type
(0 reviews) -
Full Suspension Kits - 4th Gen 4runnerFREE SHIPPING
within 48 US StatesDobinsons 1-3.5″ 3-Way Adjustable MRR Coilovers | Toyota 4Runner 2003-2009
- Suits 2003-2009 Toyota 4Runner 4th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Dobinsons MRR are height adjustable by a fully threaded body
- The Dobinsons MRR Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(8 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-289 1.75″ Rear Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Teal
- Dobinsons C59-289 Rear Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 1.75″ and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ70, RJ77, KZJ78 – 87-96 with stock rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(9 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60684 Front 2.6″ IFP Shocks Pair | Toyota Land Cruiser 80 Series (6″ lift)
- Suits Toyota Land Cruiser 80 Series 1990-97 and Lexus LX450 with 6″ of Lift or for Long Travel use
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 728mm extended, 432mm compressed
(14 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60685 Rear 2.6″ IFP Shocks Pair | Toyota 80 Series (6″ lift) + Tundra
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97 with 6″ of Lift or for Long Travel use and 2022-2025+ Toyota Tundra for Long Travel
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 730mm extended, 446mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(12 reviews) -
Dobinsons
Dobinsons SP59-023 Greasable Pin Kit (Pair) | Land Cruiser 70 Series
- Suits all 70 Series models with leaf spring rear ends, including 70, 73, 74, 75, 77
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- Photo for reference only, actual product may appear different
(5 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons Toyota Tundra 2.25-3.0″ IMS Suspension Kit for 2007-2021
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Photos show full kit with most options purchased – choose what you’d like
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- IMS struts – Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
KL Cherokee (2014-2022) (Trailhawk)
Dobinsons C29-151 Rear Lifted Coils for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Trailhawk (AD2) lifts 1.0″ rear. Sport (AD1) models lift 2″ rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a pair
- Powder coated in a long lasting black color
(5 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-547 2″ VHD Land Cruiser 200 Series Rear Coils – Pair
- C59-547 – 2″ lift with 880LBS constant rear weight, 2.5″ with 550LBS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 520/490mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(3 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C45-423 Rear Coil Springs for Pathfinder R52 & R53 – Pair
- These are for the independent rear suspension Pathfinder R52 models 2013-2020 and R53 2021+
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil springs for this vehicle
- C45-423 Rear coils will lift 30mm over original height with the added weight of 300-500LBS of constant weight, (for example, towing a heavy trailer)
(3 reviews) -
40 Series Land Cruiser Early (1960-1979)
Dobinsons 1.75″ Suspension Kit | Toyota Land Cruiser FJ40 BJ40 1960-1979
- Suits Land Cruiser 40 series 1960 to 1979 models with 25mm eye leaf springs
- Choose from Twin Tube Nitrogas shocks or IMS Monotube shocks down below
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Front and rear leaf springs have a military wrap on the fixed end of each spring
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Photos are for illustration purposes
(9 reviews) -
Sequoia 1st Gen (2001-2007)FREE SHIPPING
within 48 US StatesDobinsons 1.75-2.5″ Sequoia Suspension Kit for 2001-2007 4.7L V8
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- All 3 different Dobinsons shock types are available to choose from below
(9 reviews) -
Dobinsons
Dobinsons Coil Spring Silencer
- For +-17mm Wire Diameter Coil Springs
- Measure the thickness of the wire on your coil springs before ordering
- Offered in 2 different sizes for different inner diameter (ID) coil springs
- Suits 102-124mm (4.0″ – 4.88″) ID Coil Springs
- Suits 130mm -146mm (5.1″ – 5.75″) ID Coil Springs
- To be installed in the softer section of a variable rate coil spring. (The part of the coil spring that collapses first, up top)
- Made from High-Durometer Rubber
- Has adhesive inside to stay in place
- Sold INDIVIDUALLY, order 2 for 2 coil springs
(0 reviews)$15.00 Select options This product has multiple variants. The options may be chosen on the product page -
Bronco (2021-2025+)
Dobinsons Ford Bronco Sway Bar Relocation Bracket Kit
- Suits 2021-2025+ Ford Bronco 2-door and 4-door models (not Bronco Sport)
- Lowers stock front sway bar for better working angle and clearance
- Includes machined aluminum spacers
- Easy bolt-on installation
- Includes new correct grade longer hardware
- Recommended for lift heights of 2″ or more to correct sway bar operating angle
- Installation Instructions
(2 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Tubular UCA Pair | Land Cruiser 100 LX470 1998-2007 – No Ball Joints
- For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
- This purchase does not include any ball joints. Use OEM or aftermarket OE sized upper ball joints
- Not compatible with AHC, it does not have the bracket in place
- Includes both left and right hand side arms, OE style rubber frame bushings installed in the arms, all joint caps, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Product Video
- Also available with ball joints installed, here
- Replacement Ball Joints can be ordered here
(8 reviews)