You may be interested in…

• 

  • 
  • 
  • 

  Accessories

  Ships FREE !!
  within 48 US States

  Dobinsons Tundra Snorkel Kit for 2014-2021 5.7L V8

  • Specifically made for the 2014-2021 Toyota Tundra with 5.7L V8 Motor and stock air box
  • Works with TRD Pro air box too
  • Rotationally molded using precision CNC shaped aluminum dies
  • Increases air intake height to allow safer water crossings and reduce dust intake
  • Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
  • Manufactured from high quality UV resistant LLDPE
  • Snorkel Kits include template and all mounting hardware
  • Installation Instructions

  $395.00 Add to cart
• 

  • 
  • 
  • 

  Performance Upgrades - 4th Gen 4Runner

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Powerbrake D-Line HP Rotor and Pad Kit | 4Runner Front 03-09

  • Suits Toyota 4Runner 2003-2009 Front with OE 12.55″ Rotor Size
  • Measure rotor size for 12.55″ diameter, or check back of brake caliper for stamping of “13WG” or “13WL”
  • Also available for the REAR
  • Powerbrake D-Line Features
    • Rotors are cast from a proprietary high carbon cast-iron alloy.
    • Rotors are machined to tolerances up to three times tighter than the industry norm.
    • All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
    • Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
    • Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
    • Matched high friction PB05 brake pads take the guesswork out of pad selection.
    • Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
  • Powerbrake D-Line Benefits at a Glance
    • Reduced stopping distances in both wet and dry conditions.
    • Reduced brake fade and improved brake consistency.
    • Improved initial brake response (bite).
    • Improved brake modulation particularly during emergency stops.
    • Improved resistance to rotor distortion (warping) and cracking at high temperatures.
  • What’s Included in Powerbrake D-Line?
    • 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
    • An axle set of matched PB05 high-performance brake pads – Made in Japan.
    • Fits as per a standard rotor and pad change, using the vehicle’s original calipers.

  $810.00 Select options
• 

  • 
  • 

  Timbren

  Ships FREE !!
  within 48 US States

  Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus

  • Suits 2000-2024 Tundra,  2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
  • Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all.  Inspect your vehicle before ordering
  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation – Installation Video
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Click here for instructions

  $269.36 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons Tubular UCA Kit | Tacoma Hilux Fortuner 2005-23

  • Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Product Video
  • Also sold without ball joints

  $795.00 Add to cart
• 

  • 
  • 
  • 

  Ranger 2019+ (US Spec)

  Ships FREE !!
  within 48 US States

  Dobinsons IMS Monotube IFP Rear Shocks | Ford Ranger USA Model 2019-2023

  • For Ford Ranger 2019-2023 USA spec, for 0-2.5″ of rear lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • 638mm extended, 415mm compressed lengths
  • Full 2 year limited warranty, no set rebuild time period

  $580.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s | Toyota Tacoma 2005-23

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
  • Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
  • Complete kit for both left and right hand side
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  Winches

  Ships FREE !!
  within 48 US States

  Warn 103255 VR Evo 12-S Winch 12K | Synthetic Rope

  • Winch; VR12-S; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 12000 Pound Line Pull Capacity; 90 Foot Synthetic Rope; Hawse Fairlead; Wired Remote; Planetary Gear Drive
  • Black Tactical Look Puts You At The Head Of The Off-Road Pack
  • Waterproof Albright® Contactor Control For The Ultimate In Reliability
  • One-Piece Tie Plate Replaces Tie Rods For Added Strength And Rigidity
  • Convertible Control Pack Allows Upright Or Low-Profile Winch Mounting
  • Powerful, Efficient Series-Wound Motor
  • Best-In-Class Load-Holding Cone Brake For Superior Control
  • Limited 7 Year Warranty
  • Winch Rating: 12000 Pound
  • Recommended Use: Jeep/Truck/SUV
  • Operation Type: Electric
  • Mount Type: Fixed Mount
  • Voltage: 12 Volt
  • Free Spooling: Yes
  • Line Length (FT): 90 Feet
  • Line Material: Synthetic
  • Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
  • Brake Type: Spring Applied Disc
  • Max Amp Draw: 396 Amp Draw At 12000 Pound
  • Gear Reduction Ratio: 234:1
  • Includes Mounting Hardware: Yes
  • Thermal Shutoff: No
  • Color: Black
  • Fairlead Type: Hawse
  • Remote Type: Wired
  • Line Speed At Max Pull: 4 Feet Per Minute At 12000 Pound
  • Electrical Control Type: Contactors
  • Motor Type: Series Wound
  • Drive Gear Type: Planetary
  • Line Diameter (IN): 3/8 Inch
  • Mounting Hole Quantity: 4
  • Drum Material: Steel
  • Estimated Install Time (Hours): 2
  • Warn Warranty information is all listed here: https://www.warn.com/warranties

  $979.98 Add to cart
• 

  • 
  • 
  • 

  Recovery

  MAXTRAX MKII Mounting Pins (40mm bolts)

  • Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
  • 40mm bolt length, see attached photo for description
  • 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
  • Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
  • M10 stainless bolt has a provision for a small padlock
  • Please Note: Antiseize recommended on install
  • SOLD AS A SET OF FOUR

  $65.99 Add to cart
• 

  • 
  • 
  • 

  All Pro Offroad

  Ships FREE !!
  within 48 US States

  Toyota Tacoma Bed Stiffener Kit | 2005-2023

  • Suits 2005 to 2023 Toyota Tacoma, any bed length
  • Essential if running a cap, canopy or camper so that the bed flex doesn’t destroy the mounting points of those
  • Stiffens bed sides and makes them more rigid
  • Recommended especially for tire clearance modifications or extra weight in the bed
  • Provides additional tie down points for cargo
  • Antenna whip or light mounting tab
  • Some drilling is required for installation
  • Installation Instructions
  • Made in the USA!!

  $205.00 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460

  • Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
  • Order 1 for 1 vehicle
  • Heavy Duty, zinc plated, with high quality ball joint ends for long life
  • Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
  • Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
  • Adjustable to suit lift heights of 2″ to 4″
  • Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
  • Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video.  Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary

  $200.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50701 IMS Shocks | Toyota and Lexus (0-3″ lift)

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
  • Specifications: 598mm extended, 389mm compressed

  $580.00 Add to cart
• 

  • 
  • 
  • 

  GX460 (2010-2023)

  Dobinsons 1.5-3.5″ Lift Kit for Lexus GX460 2010 to 2023 (all options)

  • Every suspension option from Dobinsons to lift your Lexus GX460 all on one page
  • Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs
  • You can choose to upgrade to the higher end IMS or MRA struts and shocks on this page in the drop down menus

  From $1,200.00 Select options
• 

  • 
  • 
  • 

  100 Series Land Cruiser IFS (1998-2007)

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A786 MRA Extended Travel Adj Front Shocks | 100 Series (2-2.5″ Lift)

  • Extended Travel Front Shocks for 100 Series and LX470 – these require a Diff Drop Kit and UCA’s to be installed for full articulation and to prevent axle binding
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Reservoir mounts to the empty holes forward of the shock on both sides
  • Installation Instructions of the MRA Shocks
  • Full 2 year limited warranty, no set rebuild time period
  • 470mm extended and 315mm compressed

  $1,350.00 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460

  • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
  • Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
  • Zinc plated, then powder coated black, for the ultimate finish and protection

  $405.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum UCA’s | 200 Series Land Cruiser

  • Super strong billet aluminum front upper control arms (UCA’s)
  • Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
  • Complete kit for both left and right hand side
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • *Must reuse OEM Washers
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
  • Photos for illustration purposes

  $1,195.00 Add to cart
• 

  60 62 Series Land Cruiser (1980-1989)

  Dobinsons PB59-1019K Polyurethane Leaf Spring Bush Kit for Toyota

  • Suits 40/45 Series and 60 Series Land Cruisers with 35mm spring eyes front and rear, and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999 and FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
  • For any lift height, or no lift. These are OE replacement bushings.
  • Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
  • Pressing of OE bushings may be necessary during removal and installation
  • Replaces OE bushings in all 6 positions of leaf springs in the front or rear
  • Order 2 kits to do front and rear of the vehicle
  • Greasable bolts are sold in pairs, sold separately

  $100.00 Add to cart
• Sale!

  

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Icon Tubular UCA DJ Pro Kit for 22-24 Tundra + 23-24 Sequoia

  • Suits 2022-2024+ Tundra and 2023-2024+ Sequoia 4×4 Models with 1.75+ of lift over a base model
  • Built in added caster for better handling on lifted vehicles
  • Delta Joint PRO allows maximum articulation without binding
  • Delta Joint PRO is 100% serviceable and rebuildable
  • Serviceable dual stage pivot bushings
  • CNC machined housings for bushings and Delta Joint PRO
  • 1026 DOM tube construction with black powder coat finish
  • Includes billet dust caps for Delta Joint PRO
  • Installation Guide
  • Warranty Info

  $923.95 Original price was: $923.95.$879.95Current price is: $879.95. Add to cart
• 

  • 
  • 
  • 

  Tundra 2nd Gen (2007-2021)

  Ships FREE !!
  within 48 US States

  Dirt King Performance Tundra Lower Control Arms – Tundra + Sequoia

  • Suits 2007-2021 Toyota Tundra 2WD / 4WD and 2008-2022 Toyota Sequoia 2WD / 4WD
  • CAD designed
    
  • Formed steel bushing gussets
  • Internally ribbed with extrusions for weight reduction
  • Preassembled for fast installation
  • Grease fitting ports for easy servicing
  • Zinc plated components for corrosion resistance
  • Bump stop plating
  • Limit strap tabbing
  • Bypass shock tabbing
  • Professionally MIG welded
  • Proudly made in the USA

  $2,199.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  On Backorder

  • 
  • 
  • 

  Dobinsons

  Ships FREE !!
  within 48 US States

  ETA is July 2024

  Dobinsons MRA59-A222 3-Way Adjustable MRA Front Struts

  • Suits 2001-2007 Toyota Sequoia 4×4, 1998-2004 Toyota Tacoma 4×4, 2000-2006 Toyota Tundra 4×4, 1996-2002 Toyota 4Runner 4×4
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • 458mm extended length, 335mm compressed
  • Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs or top mounts – sold separately
  • Instructions for setting coil seat height

  $1,280.00 Add to cart
• Sale!

  

  Wheels

  Ships FREE !!
  within 48 US States

  Warn 104490 Jack Hammer Wheel – 17×8.5″ 6×5.5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: Not Applicable
  • Weight: 30 LBS
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 6×5.50
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 6×139.7
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 106.10
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: Solid Center
  • With Inserts: No
  • Load Capacity: 2500
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: Yes
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser

  • Fully rebuildable and re-valvable
  • Extended Travel – 567mm extended, 417mm compressed
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Winches

  Ships FREE !!
  within 48 US States

  OVS SCAR Waterproof 12K Winch | Synthetic Rope | Wireless Remote

  • Single Line Rated Pull: 12,000lb
  • Motor: 7.0hp Series Wound
  • Waterproof: IP68 Rated
  • Voltage: 12V
  • Control: Wireless Remote w. 11.5’ Lead with Built in Lithium Battery
  • Gear Train: 3 Stage Planetary Gear Systems with Ring Gear
  • Gear Ratio: 218:1
  • DB Output: Low (it’s quiet)
  • Clutch: Rotating Ring Gear
  • Braking Action: Automatic Out-Of-Drum
  • Drum Size: 2.5” x 8.8”
  • Mounting Bolt Pattern: 10” x 4.5”
  • Overall Dimensions: 21.3” L x 6.3” W x 7.9” H
  • Line Speed: 42’ Per Minute
  • Steel Cable: 3/8” x 85’
  • Hook: Heavy Duty with Clip
  • Fairlead: Aluminum Hawse Fairlead
  • Electric Cable: 70” x 25 mm2
  • Solenoid: 500A (Heavy – Duty)
  • Recommended Battery: 650CCA Minimum.
  • Weight: 66 lbs
  • Warranty: Limited Lifetime Warranty Mechanical,
  • 5 Year Electrical

  $599.99 Add to cart
• 

  Dobinsons

  Dobinsons Strut Top Plates Pair | Tacoma 05-23 4Runner 03-24 FJ Cruiser GX470 GX460

  • Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Lexus GX470, Lexus GX460
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold as pairs
  • Product comes exactly as shown in the photo
  • Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
  • Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
  • Installation instructions

  $120.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Sale

  Ships FREE !!
  within 48 US States

  Icon Tubular Lower Trailing Arm Kit | 4Runner FJ Cruiser GX470 GX460 LC200

  • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460, Lexus LX570 and 200 Series 2008-2021
  • CNC machined & notched 1026 DOM steel construction
  • Multi durometer bushing for noise free operation and maximum angularity
  • No grease required for life of bushings
  • Quality JM16T PTFE-lined FK Rod Ends
  • Adjustable for various lift heights & driveline angles
  • Offset lower link front pivots improve roll steer
  • Tangent lower link barrel design reduces risk of off-road hangups
  • Integrated OEM emergency brake bracket mount
  • ICON1K tested in extreme off-road conditions
  • Fabricated components covered under ICON’s lifetime warranty
  • Sold as a Pair
  • Installation Guide
  • Warranty Info

  $577.45 Original price was: $577.45.$549.95Current price is: $549.95. Add to cart
• 

  • 
  • 
  • 

  GX470 (2002-2009)

  Dobinsons 1″ to 3.5″ Lift Kit for Lexus GX470 (All Options)

  • Full Dobinsons Complete Suspension kit for Lexus GX470 from 2003 to 2009, with every possible option listed on one page
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
  • Select the type of struts and shocks you want as well as all possible add-ons down below
  • Choose from Dobinsons Classic Twin Tube shocks, IMS Monotube, or MRA 3-way adjustable remote resi shocks
  • See note below in description about KDSS models

  From $1,200.00 Select options
• 

  • 
  • 
  • 

  All Pro Offroad

  Ships FREE !!
  within 48 US States

  Toyota Tacoma Bed MOLLE Panel | 2005-2023

  • Suits 2005-2023 Toyota Tacoma, short or long bed
  • Adds an awesome mounting area against the back bed wall, below your back window, to attach all sorts of items to
  • The panel can also be used to provide additional tie down locations for securing gear in the bed
  • You will never run out of uses for this modular mounting panel
  • Includes 11 Gauge Steel Molle Panel and Mounting Brackets
  • Zinc Plated Mounting Hardware
  • Panel has a Black Powder Coat Finish
  • Compatible With or Without Factory Front Bed Accessory Bar
  • .44” and .20”. Nominal Diameter Round Mounting Holes
  • No Drilling is Required for Installation
  • Finished in a durable black powder coat, ready to be used immediately!!
  • Installation Instructions
  • Short and Long Bed designs have different shapes and mounting holes, see photos to show the differences – they are not interchangeable
  • Made in the USA!!

  $270.00 Select options
• 

  • 
  • 
  • 

  Dobinsons

  Ships FREE !!
  within 48 US States

  Dobinsons Tubular UCA Kit | Land Cruiser 200 Series + Lexus LX570

  • Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
  • These arms come fully assembled with the ball joints and bushings installed
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Made from HSLA (High Strength Low Alloy) Steel
  • 5mm (0.2″) wall thickness
  • Powder coated black
  • Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Product Video
  • Also sold without ball joints

  $795.00 Add to cart
• 

  • 
  • 

  Dobinsons

  Dobinsons SC59-002 Pair of Strut Top Plates | Tacoma 98-04 + 4Runner 96-02

  • Suits Toyota Tacoma 1st Gen 1998-2004, 4Runner 3rd Gen 1996 to 2002, and Toyota Land Cruiser Prado 90
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold as pairs
  • Photo is of actual product and parts included
  • Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
  • Assembly Instructions

  $120.00 Add to cart
• 

  • 
  • 
  • 

  Recovery

  MAXTRAX MKII Mounting Pins (17mm bolts)

  • Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
  • 17mm bolt length, see attached photo for description
  • 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
  • Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
  • M10 stainless bolt has a provision for a small padlock
  • Please Note: Antiseize recommended on install
  • SOLD AS A SET OF FOUR

  $65.99 Add to cart
• 

  • 
  • 
  • 

  MRA Remote Resi 3-Way Adjustable Monotube

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A701 3-Way Adjustable MRA Shocks

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Shock Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 609mm extended, 389mm compressed
  • SOLD IN PAIRS
  • Now comes with a longer hose and different mounting instructions

  $1,150.00 Add to cart
• 

  Upper Control Arms

  Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus

  • This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
  • Commonly referred to “as the long UCA bolt”
  • Services both control arms at once
  • Does not come with any washers.  New aftermarket UCA’s usually come with the necessary washers
  • Vehicle Fitment
  • • 2003-2009 Toyota 4Runner
    • 2010-2024 Toyota 4Runner
    • 2005-2015 Toyota Tacoma
    • 2016-2023 Toyota Tacoma
    • 2006+ FJ Cruiser (all years)
    • 2003-2009 Lexus GX470
    • 2010-2023 Lexus GX460
    • Toyota Hilux Vigo
    • Toyota Hilux Revo
    • Toyota Fortuner
    • Toyota Prado 120
    • Toyota Prado 150
  • Bolt Grade: 10.9
  • Head Drive Type: Hex
  • Length: 351 mm
  • Material: Steel
  • SAE or Metric: Metric
  • Thread Diameter: 14 mm
  • Thread Length: 28.7 mm
  • Thread Size: 14 mm
  • Thread Type: Fine

  $69.00 Add to cart
• 

  • 
  • 

  Suspension

  Dobinsons GS59-705 Rear Shocks | FJ Cruiser 4Runner GX470 GX460

  • Suits Toyota 4Runner 2003-2024 and Toyota FJ Cruiser, Lexus Gx470 and GX460 models 2006 to 2023, with 0-2.5″ of lift
  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Dobinsons GS59-705 Specifications: 590mm extended, 355mm compressed, 50mm body size
  • Made in Yellow and Black

  $310.00 Select options
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: Solid Center
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• Sale!

  

  • 
  • 
  • 

  Wheels

  Ships FREE !!
  within 48 US States

  Warn 106687 Diamond Cutter Wheel – 17×8.5″ 5×5 0″ Offset – Black

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Black Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Black
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A683 3-Way Adjustable MRA Front Shocks | 80 Series 0-3″ Lift

  • Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 0-3″ of lift
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Installation Instructions of the MRA Shocks
  • 627mm extended, 385mm compressed
  • Full 2 year limited warranty, no set rebuild time period

  $1,350.00 Add to cart
• 

  • 
  • 

  4Runner 5th Gen (2010-2024)

  Dobinsons GS59-701 Rear Shocks | Toyota 4Runner FJ Cruiser GX470 GX460

  • Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
  • Available in Yellow or Black

  $310.00 Select options
• 

  • 
  • 
  • 

  Tacoma 2nd Gen (2005-2015)

  Ships FREE !!
  within 48 US States

  Dirt King Performance Tacoma Lower Control Arms for 2005-2015

  • Suits 2005-2015 2nd Gen Toyota Tacoma 2WD / 4WD
  • CAD designed
    
  • Formed steel bushing gussets
  • Internally ribbed with extrusions for weight reduction
  • Preassembled for fast installation
  • Grease fitting ports for easy servicing
  • Zinc plated components for corrosion resistance
  • Bump stop plating
  • Limit strap tabbing
  • Bypass shock tabbing
  • Professionally MIG welded
  • Proudly made in the USA

  $1,849.00 Add to cart
• 

  On Backorder

  • 
  • 
  • 

  Tacoma 3rd Gen (2016-2023)

  Ships FREE !!
  within 48 US States

  Dirt King Performance Tacoma Lower Control Arms for 2016-2023

  • Suits 2016-2023 3rd Gen Toyota Tacoma 2WD / 4WD
  • CAD designed
    
  • Formed steel bushing gussets
  • Internally ribbed with extrusions for weight reduction
  • Preassembled for fast installation
  • Grease fitting ports for easy servicing
  • Zinc plated components for corrosion resistance
  • Bump stop plating
  • Limit strap tabbing
  • Bypass shock tabbing
  • Professionally MIG welded
  • Proudly made in the USA

  $1,849.00 Add to cart
• 

  • 
  • 
  • 

  Performance Upgrades - 4th Gen 4Runner

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Powerbrake D-Line HP Rotor and Pad Kit | 4Runner Sport Front 03-09

  • Suits Toyota 4Runner Sport 2003-2009 Front with OE 13.3″ Rotor Size
  • Measure rotor size for 13.3″ diameter, or check back of brake caliper for stamping of “13WH”
  • Also available for the REAR
  • Powerbrake D-Line Features
    • Rotors are cast from a proprietary high carbon cast-iron alloy.
    • Rotors are machined to tolerances up to three times tighter than the industry norm.
    • All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
    • Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
    • Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
    • Matched high friction PB05 brake pads take the guesswork out of pad selection.
    • Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
  • Powerbrake D-Line Benefits at a Glance
    • Reduced stopping distances in both wet and dry conditions.
    • Reduced brake fade and improved brake consistency.
    • Improved initial brake response (bite).
    • Improved brake modulation particularly during emergency stops.
    • Improved resistance to rotor distortion (warping) and cracking at high temperatures.
  • What’s Included in Powerbrake D-Line?
    • 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
    • An axle set of matched PB05 high-performance brake pads – Made in Japan.
    • Fits as per a standard rotor and pad change, using the vehicle’s original calipers.

  $810.00 Select options
• 

  • 
  • 

  Firestone

  Firestone 4108 Coil-Rite Rear Helper Airbags for 2-3″ Lift | 4Runner FJ Cruiser GX470 GX460

  • Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 WITH 2-3″ of Lift
  • Substitute Option – Air Lift 60769
  • These are longer than the Firestone 4135 for lifted vehicles
  • Complete kit – 1 per vehicle
  • Inserts inside your rear coil springs to add additional load support
  • Manually inflate or deflate the air bags to add or remove support or height
  • Perfect for people who tow, or regularly load up fully and need additional height or support
  • Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
  • Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
  • Installation Manual, Click Here

  $144.12 Add to cart