Your cart is currently empty!
Tundra 2nd Gen (2007-2021)
Showing 31–60 of 87 results
-
Add-a-LeafWheeler’s 1″ Lift Add-A-Leaf Set for 2007-21 Tundra
- Suits 2007-2021 Toyota Tundra
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 1.0″ of lift approximately. Different bed/cab configurations could see variations in lift height
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
$125.00 Add to cart -
Tundra 2nd Gen (2007-2021)Dobinsons Rear Leaf Springs Options for Toyota Tundra 2007-21
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride
From $710.00 Select options -
Tundra 2nd Gen (2007-2021)
Dobinsons C59-610 Front 2.25″ Lift Coil Springs for Toyota Tundra 4×4 2007-2021
- 2.25″ lift with a bumper and winch installed
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- Sold in Pairs
- 737LBF/in spring rate
$405.00 Select options -
Full Suspension Kits - Tundra 2nd Gen
Dobinsons 2.25-3.0″ Pre-Assembled IMS Coilovers for Toyota Tundra 2007-21 4×4
- Suits Toyota Tundra 2007-2021 4×4 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Tundra? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by an adjustable circlip. Springs must be compressed to change the clip height
- All are assembled at the standard lowest clip height
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 615mm extended, 445mm compressed strut lengths
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Tundra IMS coilovers use a slightly different coil seat as shown in secondary photos
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Add an optional lean correction spacer for the driver’s side here
$1,370.00 Select options -
Tundra 2nd Gen (2007-2021)
Dobinsons Front Winch Bumper for Toyota Tundra 2014-2021
- Suits Toyota Tundra from 2014 to 2021
- Winch compatible, up to 12,000 LB winches
- Driving Light Mounts
- Optional Fog Lights – Here for more details
- Optional Front Driving Lights (as shown in photos) – Here for more details
- Requires cutting of the original plastic front bumper cover
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop
- Suits 10,000 and 12,000 LB Low Mount Winches
- Installation Instructions
- Truck freight shipping is usually to the nearest freight terminal, or commercial address with forklift
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery below. We will be in touch with that delivery address
From $2,075.00 Select options -
Firestone
Daystar Universal Airbag Cradle Kit Tacoma and Tundra
- Enjoy full suspension travel and the benefits of air bags with the Daystar Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough Daystar polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Your Daystar Air Bag Cradle Kit is backed by a Lifetime Warranty
- Daystar cradle mounts to top of leaf spring, airbag mounts to frame above only
$88.00 Add to cart -
Sale!Tundra 2nd Gen (2007-2021)RCI is on Sale For Spring!!
RCI Engine Skid Plate | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front engine skid plate only
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
Original price was: $349.00.$314.10Current price is: $314.10. Select options -
Bump Stops
Wheeler’s Rear Superbumps for 2007-2021 Toyota Tundra
- Suits the following vehicles: 2007 to 2021 Toyota Tundra
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), goes under the factory u-bolts
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Installation Instructions
$226.00 Add to cart -
Dobinsons
Dobinsons Tundra 2.25-3.0″ IMS Suspension Kit for 2007-2021 Double Cab 4×4 V8
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Photos show full kit with most options purchased – choose what you’d like
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- IMS struts – Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
From $2,485.00 Select options -
Tundra 2nd Gen (2007-2021)
Dobinsons C59-578 Front 3″ HD Lift Coil Springs for Toyota Tundra 4×4 2007-2021
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- Lifts 4″ with stock weight front end, and 3″ with a bumper and winch installed
- Sold in Pairs
- 662LBF/in spring rate
$405.00 Select options -
Sale!Struts + Shocks - Tundra 2nd Gen
Bilstein 24-232173 Front 5100 Series Strut – Tundra Sequoia
Original price was: $183.56.$157.00Current price is: $157.00. Add to cart -
Tundra 2nd Gen (2007-2021)ETA is July 2024
Toyota Tundra Long Range Replacement Fuel Tank 2007-2021 (46gal)
- Suits Toyota Tundra 2007-2021 Short and Long Bed models, dual cab and crew max
- This is a replacement tank that replaces your OE fuel tank, it holds 46 gallons instead of the stock 26 gallons and fills the same way an OE tank fills
- 46 gallon capacity, replaces the original tank (both OE sizes)
- Can replace the bigger OEM tank, but an additional part needs to be removed from the frame for the tank to fit properly (not hard)
- Tank fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 4 hours
- Usually stocked item in the US
- Part Number TTUNDRADCR
- Intended to be installed by a certified mechanic
- Installation Instructions
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- Call or email to check and verify stock before ordering
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
$2,245.00 Select options -
Sale!Roof RacksRCI is on Sale For Spring!!
RCI 12″ HD Low Profile Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
- 5ft (46″) 86lbs
- 5ft6in(52″) 92lbs
- 6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
Original price was: $699.99.$629.99Current price is: $629.99. Select options -
Performance Upgrades - Tundra 2nd GenShips FREE !!
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Tundra 07-21 Rear
- Suits Toyota Tundra 2007-2021 Rear
- Also offered for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
$899.00 Add to cart -
Full Suspension Kits - Tundra 2nd GenShips FREE !!
within 48 US StatesDobinsons 2.0-3.0″ Pre-Assembled MRA Coilovers for Toyota Tundra 2007-21
- Suits Toyota Tundra 2007-2021 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Tundra? This is your answer
- Coils are teal. Struts are black
- Includes C92-3016650 Front Coil Springs, Inner Diameter – 3.0″, Length – 16″, Spring Rate – 650lb/in
- All are assembled at the standard coil seat height, you adjust the height on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.
- Front coilover assembly instructions
- Link to Matching rear shocks
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
$2,185.00 Select options -
Tundra 2nd Gen (2007-2021)Ships FREE !!
within 48 US StatesDirt King Toyota Tundra Boxed UCA set with Uniballs – Tundra + Sequoia
- Suits 2007-2021 Toyota Tundra 2WD / 4WD and 2008-2022 Toyota Sequoia 2WD / 4WD
- Proudly made in the USA
- CAD designed, Boxed plate construction, Professionally MIG welded
- 4130 chromoly uniball cups, 1” FK uniballs, 17-4 stainless steel misalignment spacers
- Military grade F911 hardware, Brushed stainless steel logo plates
- Preassembled for fast installation
- Grease fitting ports for easy servicing of bushings
- Zinc plated components for corrosion resistance
$849.00 Add to cart -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum UCA’s | 07-21 Tundra and 08-22 Sequoia
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
$1,195.00 Add to cart -
BrakesShips FREE !!
within 48 US StatesPowerbrake X-Line Toyota Tundra Big Brake Kit for 2007-2014
2007-2014 Toyota Tundra Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 14.6″ x 1.34″ 56-vane discs
- 56 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Suits 2007-2014 models with M12 caliper mounting bracket bolts
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 18″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also
$3,250.00 Select options -
Sale!Struts + Shocks - Tundra 2nd Gen
Bilstein 24-286244 – 5100 Series Rear Shock 0-2″ lift – Tundra
- Suits 2007-2021 Toyota Tundra 4×4 Trucks – Rear
- Suits 0-2″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 26.81 Inch
- Compressed Length (IN): 17.34 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: No
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- Sold individually
Original price was: $129.05.$110.00Current price is: $110.00. Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A711 3-Way Adjustable MRA Rear Shocks | Tundra 2007-2021
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart -
Accessories
Dobinsons Pickup Rear Drawers Kit with Fridge Slide Universal Fit
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
- You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
From $1,845.00 Select options -
Sale!Upper Control ArmsShips FREE !!
within 48 US StatesIcon Tubular UCA DJ Kit for 07-21 Tundra + 08-22 Sequoia
- Suits 2007-2021 Tundra and 2008-2022 Sequoia 4×4 Models with 1.75+ of lift
- ICON Delta Joint
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- Installation Guide
- Warranty Info
Original price was: $923.95.$879.95Current price is: $879.95. Add to cart -
Sale!Tundra 2nd Gen (2007-2021)RCI is on Sale For Spring!!
RCI Tundra Fuel Tank Skid Plate | 2007-2021 Tundra
- Suits 2nd Gen Tundra (2007-2021)
- 26 gallon skid is NOT compatible with 8 foot bed models
- Protects the vulnerable fuel tank from accidental puncture
- Compatible with nearly all 4×4 trucks from 2007-2021 (26 gallon skid is NOT compatible with 8 foot bed models).
- Requires Toyota rear fuel tank support strap from off-road model to bolt on skid plate
- Same mounting locations as factory skid plate but substantially sturdier metal construction
- Smooth, flat surface that easily slides over obstacles. No exposed bolt heads on skid plates on 26gal fuel skid plate
- 38gal fuel tank skid plate now incorporates welded bolt protection rings standard
- Direct bolt on addition, no drilling
- Includes heavy duty black powder coating for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Made in the USA.
Original price was: $356.00.$320.40Current price is: $320.40. Select options -
Performance Upgrades - Tundra 2nd GenShips FREE !!
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Tundra 07-21 Front
- Suits Toyota Tundra 2007-2021 Front
- Also offered for the REAR
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
$999.00 Add to cart -
Full Suspension Kits - Tundra 2nd GenShips FREE !!
within 48 US StatesDobinsons Tundra 2.0″-3.0″ MRA Suspension Kit for 2007-2021 4×4 V8
- Suits Toyota Tundra 2007-2021 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Coils are teal. Struts and shocks are black
- Front MRA Coilovers are assembled at the standard coil seat height
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period, fully rebuildable shocks
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
From $4,420.00 Select options -
Tundra 2nd Gen (2007-2021)Ships FREE !!
within 48 US StatesDobinsons MRA59-A710 3-Way Adjustable MRA Front Struts | Tundra 2007-2021
- Pair of Struts only, no coils included and not preassembled
- If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2007-2021 Tundra
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing, can vary depending on UCA’s used
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs – sold separately
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
- Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping
$1,790.00 Add to cart -
Dobinsons
Dobinsons Tundra IMS 2.25″-3.0″ Quick Ride Kit or AAL for 2007-2021 4×4 V8
- Suits 2007-2021 Toyota Tundra 4×4 V8 Dual Cabs
- Complete Quick Ride or AAL suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- In the back, you can either lift your truck with the Dobinsons Quick Ride (block and U-bolt) Kit or the Wheeler’s Add-a-leaf Kit
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Affordable suspension system without requiring new rear leaf packs
- Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
From $1,940.00 Select options -
Dobinsons
Dobinsons Tundra Add-A-Leaf Kit for L59-120-R Leaf Pack (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-120-R to L59-121-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 single leafs and 2 longer center pins
$180.00 Add to cart -
Tundra 2nd Gen (2007-2021)Ships FREE !!
within 48 US StatesDirt King Performance Tundra Lower Control Arms – Tundra + Sequoia
- Suits 2007-2021 Toyota Tundra 2WD / 4WD and 2008-2022 Toyota Sequoia 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
$2,199.00 Add to cart
