Tundra 3rd Gen (2022-2024)

Showing 1–30 of 62 results

Full Suspension Kits - Tundra 3rd Gen (6)
Skid Plates & Sliders - Tundra 2022+ (7)
Bumpers + Racks - Tundra 2022+ (3)
Performance Upgrades - Tundra 2022+ (9)
Coil Springs - Tundra 2022+ (4)
Struts + Shocks - Tundra 2022+ (11)
Control Arms - Tundra 2022+ (9)
Bump Stops - Tundra 2022+ (8)
Timbren
Ships FREE !!
within 48 US States
Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
$269.36 Add to cart
Bump Stops
Wheeler’s Front Superbump Set for Toyota & Lexus Trucks & SUV’s
- Suits the following vehicles: 2005-current Tacoma, 2003-2024 4Runner, all FJ Cruiser years, Lexus GX470 and GX460, 2007-2021 Tundra, 2022+ Tundra, 2008-2024 Sequoia
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), hardware, and an Allen wrench for installation
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Optional spacers and longer hardware are sold separately for fine tuning of bump stop clearances
- Installation Instructions
$161.00 Add to cart
Tundra 3rd Gen (2022-2024)
Dobinsons Rear Coil Spring Options | Toyota Tundra 2022+
- Suits Toyota Tundra 2022+, choose the appropriate lift height that also matches any added weight you’ve put on the truck
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Keep in mind that adding 2″+ lift to the rear will require new shocks that are longer
- Stock shocks are ok with 1″ lift but they’re not very long
- Lifting 2″ or more can shift the axle to one side. Install an adjustable panhard rod to center the axle
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- **Not compatible with factory rear airbag suspension
From $305.00 Select options
200 Series Land Cruiser (2008-2021)
Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
  
  Toyota Land Cruiser 200 Series – all years
  
  Toyota 300 Series Land Cruiser
  
  Lexus LX570 – all years
  
  Toyota Tundra – 2007 to 2021
  
  Toyota Tundra 2022+
  
  Toyota Sequoia – 2008 to 2022
  
  Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
$55.00 Add to cart
Bump Stops
Dobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
$170.00 Add to cart
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 22+ Sequoia 23+
- Made specifically for the 4×4 Toyota Tundra from 2022-2024 and Toyota Sequoia from 2023+ and 2022+ Land Cruiser 300 Series
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
- Assembly Instructions
$120.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons IMS Front Struts for Tundra 2022+ and Sequoia 2023+
- Front IMS struts to suit Toyota Tundra 2022-2023 and Sequoia 2023+
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- Coil seat for IMS59-60446 should be set at 175mm (6.87″) from the strut bushing eye
- Photo for illustration purposes
$720.00 Add to cart
Tundra 3rd Gen (2022-2024)
Dobinsons 1.0″ Lift Rear Variable Rate Springs | Toyota Tundra 2022+ (0-110LBS)
- Suits Toyota Tundra 2022+, lifts the rear 1.0″ with 0-110LBS of rear weight
- Variable rate springs for the best ride quality
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$305.00 Select options
Tundra 3rd Gen (2022-2024)
Dobinsons 2.0″ Lift Rear Variable Rate Springs | Toyota Tundra 2022+
- Suits Toyota Tundra 2022+, lifts the rear 2.0″ with stock weight (no accessories)
- Variable Rate springs for the best ride quality unloaded or loaded
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$305.00 Select options
Dobinsons
Dobinsons Adjustable Rear Sway Bar Link Pair | SE59-591
- Suits the rear of Toyota Tundra 2022+, Toyota Sequoia 2023+, Toyota Tacoma 2024+, Toyota Land Cruiser 300 Series 2022+
- Order 1 for 1 vehicle (sold as a pair)
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Adjustable length to suit lift heights of 1″ to 4″
- Watch a video here to see more about how this style of link adjusts: https://youtu.be/lZACSaE2PHI
- Photo is of the product installed on a 2022 Tundra
$200.00 Add to cart
Tundra 3rd Gen (2022-2024)
Dobinsons 2.0″ Lift Rear Variable Rate Springs | Toyota Tundra 2022+ (220-440LBS)
- Suits Toyota Tundra 2022+, lifts the rear 2.0″ with 220-440LBS constant rear end weight
- Variable Rate springs for the best ride quality unloaded or loaded
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$305.00 Select options
Tundra 3rd Gen (2022-2024)
Dobinsons 1.0″ Lift Rear Variable Rate Springs | Toyota Tundra 2022+ (220-440LBS)
- Suits Toyota Tundra 2022+, lifts the rear 1.0″ with 220-440LBS of rear weight
- Variable rate springs for the best ride quality
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$305.00 Select options
Tundra 3rd Gen (2022-2024)
Dobinsons C59-834 Front Springs | Toyota Tundra 2022+ Sequoia 2023+
- Suits Toyota Tundra 2022+ and Sequoia 2023+
- Lifts the Tundra 2.0″ with stock weight (no accessories) and the Sequoia 3.0″ with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- These will NOT suit a TRD PRO strut
- Hybrid Models lift 1-1.5″ less lift than listed here
- TRD Pro models came with 1″ of lift, so subtract that if you’re changing out your Pro suspension for Dobinsons
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$305.00 Select options
Full Suspension Kits - Tundra 3rd Gen
Ships FREE !!
within 48 US States
Dobinsons 2-3″ IMS Suspension Kit | 2022+ Toyota Tundra
- Dobinsons IMS suspension kit for your 2022-2023+ Tundra
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Hybrid Models lift 1-1.5″ less lift than listed here
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Installation Note: Transfer over the rear OEM coil isolators from the stock coils to these to prevent coil slap
- If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- **Not compatible with factory rear airbag suspension
- Standard Coil seat height for IMS59-60446 should be set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
From $1,980.00 Select options
Tundra 3rd Gen (2022-2024)
Ships FREE !!
within 48 US States
Dobinsons IMS Rear Shocks for 22+ Tundra – Stock/Light Valving
- Suits 2022+ Toyota Tundra Rear with 1.0-3.0″ of Lift – Stock/Light Load Valving
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 670mm extended, 410mm compressed
$650.00 Add to cart
Tundra 3rd Gen (2022-2024)
Dobinsons Rear Adjustable Panhard Rod for 22+ Tundra, 23+ Sequoia
- Suits Toyota Land Cruiser 200 Series 2008-2021, Toyota Tundra 2022+ and Toyota Sequoia 2023+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
$345.00 Add to cart
Tundra 3rd Gen (2022-2024)
Ships FREE !!
within 48 US States
Dobinsons IMS Rear Shocks for 22+ Tundra – Med/Heavy Valving
- Suits 2022+ Toyota Tundra Rear with 2-2.5″ of Lift – Medium/Heavy Load Valving
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 670mm extended, 410mm compressed
$650.00 Add to cart
Tundra 3rd Gen (2022-2024)
Dobinsons C59-838 Front Springs | Toyota Tundra 2022+ Sequoia 2023+
- Suits Toyota Tundra 2022+ and Sequoia 2023+
- Lifts the Tundra 3.0″ and the Sequoia 4.0″ with stock weight (no accessories)
- Fully Designed, Manufactured, and Finished In Australia
- These will NOT suit TRD PRO Struts
- TRD Pro models came with 1″ lift from the factory, so subtract that if you’re switching to a full Dobinsons kit
- Hybrid Models lift 1-1.5″ less lift than listed here
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$305.00 Select options
Tundra 3rd Gen (2022-2024)
Dobinsons 1.0″ Lift Rear Variable Rate Springs | Toyota Tundra 2022+ (550-770LBS)
- Suits Toyota Tundra 2022+, lifts the rear 1.0″ with 550-770LBS of rear constant weight
- Variable rate springs for the best ride quality
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$305.00 Select options
Dobinsons
Dobinsons 15mm Rear Spacer | 2022+ Tundra Sequoia LC300
- Suits 2022-2024+ Toyota Tundra, 2023-2024+ Toyota Sequoia, 2022+ Toyota Land Cruiser 300 Series
- High Quality Polyurethane, maintains height over time
- Fits on top of coil spring, below the OE isolator
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of rear lift
- Photo for illustration purposes
- There’s also a front spacer option
$40.00 Add to cart
Tundra 3rd Gen (2022-2024)
Dobinsons 2.0″ Lift Rear Variable Rate Springs | Toyota Tundra 2022+ (550-770LBS)
- Suits Toyota Tundra 2022+, lifts the rear 2.0″ with 550-770LBS of rear constant weight
- Variable rate springs for the best ride quality
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$305.00 Select options
Tundra 3rd Gen (2022-2024)
Dobinsons 2.5″ Lift Rear Coil Springs for Toyota Tundra 2022+
- Suits Toyota Tundra 2022+, lifts the rear 2.5″ with stock weight (no accessories)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$270.00 Add to cart
Struts + Shocks - Tundra 2022+
Dobinsons 2.0-3.0″ Pre-Assembled IMS Coilovers for Toyota Tundra 2022+
- Suits Toyota Tundra 2022+ Models
- TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
- Hybrid Models lift 1-1.5″ less lift than listed here
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Tundra? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a threaded body with adjustable collar
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Tundra IMS coilovers use a slightly different top mount
- Instructions for setting and adjusting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Standard Coil seat height for IMS59-60446 is set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
- Link to Matching rear shocks
$1,270.00 Select options
Suspension
Ships FREE !!
within 48 US States
Dobinsons MRA59-A446 3-Way Adjustable Front Struts | Tundra 22+, Sequoia 23+
- Suits Toyota Tundra 2022-2023+ and Toyota Sequoia 2023+
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A446 should be set at 175mm (6.87″) from the strut bushing eye
- Installation Instructions
$1,410.00 Add to cart
Bump Stops
Ships FREE !!
within 48 US States
Timbren Active Off Road Rear Bump Stops | 2022+ Tundra
- Suits Toyota Tundra Rear 2022+
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops on the 2022 Toyota Tundra. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
$269.36 Add to cart
Full Suspension Kits - Tundra 3rd Gen
Ships FREE !!
within 48 US States
Dobinsons 2-3″ MRR Suspension Kit | 2022+ Toyota Tundra
- Dobinsons MRR suspension kit for your 2022-2024+ Tundra
- Specs are for the non-Hybrid model
- Hybrid Models lift 1-1.5″ less lift than listed here
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Front Resi Installation
- Installation Note: Transfer over the rear OEM coil isolators from the stock coils to these to prevent coil slap
- If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- **Not compatible with factory rear airbag suspension
- Standard Coil seat height for MRA59-A446 should be set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
From $3,370.00 Select options
Tundra 3rd Gen (2022-2024)
Ships FREE !!
within 48 US States
Dobinsons MRA59-A687 3-Way Adj Rear Shocks | Tundra 2022+
- Suits 2022+ Toyota Tundra Rear with 2-2.5″ of Lift
- Recommended for constant load rear ends, these shocks have HD valving
- If you run your truck empty or with light loads, check out MRA59-A887 instead
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart
Tundra 3rd Gen (2022-2024)
Ships FREE !!
within 48 US States
Dobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022+, Sequoia 2023+ and Tacoma 2024+
- Fully adjustable to properly set the length and pinion angle
- On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Instructions written down below in the description
$345.00 Add to cart
Tundra 3rd Gen (2022-2024)
Dobinsons 2.0″ Lift Rear Coil Springs for Toyota Tundra 2022+
- Suits Toyota Tundra 2022+, lifts the rear 2.0″ with stock weight (no accessories)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
$270.00 Add to cart
Sale!
Upper Control Arms
Ships FREE !!
within 48 US States
Icon Tubular UCA DJ Pro Kit for 22-24 Tundra + 23-24 Sequoia
- Suits 2022-2024+ Tundra and 2023-2024+ Sequoia 4×4 Models with 1.75+ of lift over a base model
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Installation Guide
- Warranty Info
Original price was: $923.95.Current price is: $879.95. Add to cart