Your cart is currently empty!
Shop
Showing 61–90 of 1937 resultsSorted by popularity
-
4Runner 4th Gen (2003-2009)Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
Suspension
Dobinsons Tacoma Lift Kit for 2005-2023 4×4 (all options)
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Long bed models require the next step up in leaf spring, or they will sit 1″ less high. L59-110-R lift only 1″ on long bed models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Multiple different leaf springs options to match up with the added weight you’ve put on your truck or not
- Choose from classic Twin Tube Shocks, IMS Monotube, or MRA 3-Way Adjustable Remote Resi Shocks
- Read this to learn about the shock differences – Shock Types
- Base kit usually starts with front coils, struts, rear leaf springs, poly bush kit, rear shocks, 1 pair greasable pins. You choose what you want
- Common installation instructions related to parts on this page
(12 reviews) -
Dobinsons
Dobinsons Tacoma L59-110-R Leaf Springs Pair for 2005-2023 (0-220LB Load)
- Suits 2005-2023 Toyota Tacoma. Lifts dual cab short beds 2-2.25″ with 0-220LBS load, and 1″ on a Long Bed
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Sold as a pair – they are not side-specific
(4 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
60 62 Series Land Cruiser (1980-1989)
Dobinsons PB59-1019K Polyurethane Leaf Spring Bush Kit for Toyota
- Suits 40/45 Series and 60 Series Land Cruisers with 35mm spring eyes front and rear, and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999 and FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- Order 2 kits to do front and rear of the vehicle
- Greasable bolts are sold in pairs, sold separately
(6 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks Pair
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
- 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMITM CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
- EDP Surface Protection, Direct Bolt-On Design
- Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
- 14.2″ compressed length, 24.2″ extended length
- Installation Instructions
- Works with factory brake line length and OE bump stop length, no extensions required
- Includes reservoir brackets and hardware
- SOLD IN PAIRS
(16 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons C59-296 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 378mm, 17mm wire, 586LB Rate
(17 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons Front Adjustable Panhard Rod | Land Cruiser 80 Series LHD
- Suits Land Cruiser 80 Series and Lexus LX450
- Replaces OE Front Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- For left hand drive models
(8 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-223V Rear Coil Springs | Land Cruiser – Pair Teal
- 80 SERIES and Lexus LX450 (1990-1997) – Dobinsons c59-223v – 1.75″ lift with up to 220lbs weight
- 100 SERIES (1998-2007) – Dobinsons C59-223V – 1-1.25″ lift, variable rate, with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 19mm wire diameter, 445/455mm free height, variable rate
- Sold in Pairs
(18 reviews) -
Bilstein
Bilstein 33-313146 – 5100 Series Rear Shock
- Suits 2003-2024 Toyota 4Runner, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460, 2006-2017 FJ Cruiser
- Suits 0-2″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 23.03 Inch
- Compressed Length (IN): 14.91 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: No
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- Sold individually
(3 reviews) -
Dobinsons
Dobinsons Greasable Pin Kit (Pair) for Toyota Land Cruiser 40 60 70 Series Models (SP59-007)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- See list of suitable vehicles down below
(4 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 0-3.5″ Lift Kit Builder | Toyota Land Cruiser 80 Series (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose your coils and load carrying ability, anywhere from 0″ up to 3.5″ of Lift
- The more you lift, the more parts and pieces are needed for proper performance
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Choose from Twin Tube, IMS Monotube, or MRA 3-Way adjustable remote resi shocks
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, you can add any other parts you need
- Read more about the 3 different shock types
(13 reviews) -
Tacoma 2nd Gen (2005-2015)
Dobinsons Tacoma Snorkel Kit for 2005 to 2015 for V6 and 4Cyl Engines
- Suits Toyota Tacoma 2005-2015 with 4 cylinder or V6 Engine
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(7 reviews) -
Dobinsons
Dobinsons 0-3″ Extended Travel IMS Tacoma Coilovers | 2005-2023
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Looking for a quick and easy way to lift your Tacoma? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(18 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA 4Runner Lift Kit | 2010-24 (1-3.5″)
- Suits Toyota 4Runner 5th Gen 4×4 from 2010 to 2024
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- The more lift height you add, the more parts you need, so read the subsection headings below
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
- Resi Installation Installations of Front, and Rear
- Front height adjustment instructions
- Suspension Installation Video
(7 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Tubular UCA Pair | Land Cruiser 100 + Lexus LX470
- For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
- Not compatible with AHC, it does not have the bracket in place
- Complete kit for both left and right hand side, includes new 555 ball joints installed, OE style rubber frame bushings installed, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(10 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A682 3-Way Adjustable MRA Rear Shocks Pair | 0-3″ Lift
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, 100 Series 1998-2007, and 200 Series Wagon 2008-2021, Sequoia 2001-2007, suitable for 0 – 3″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 620mm extended, 390mm compressed
- Installation Instructions of the MRA Shocks
(19 reviews) -
Sale!All Pro OffroadFREE SHIPPING
within 48 US StatesBlack FRIDAY Sale!!All Pro 2014-2024 4Runner Windshield Washer Bottle Skid – Powder Coated
- Great addition to your 2014-2024 4Runner if you’ve added a high clearance cut to the side and have left your washer bottle exposed
- Recommended to be added when using the All Pro High Clearance Side Supports
- Can be used with any aftermarket bumper, easily attaches to the body mount
- Made of 11 GA steel
- Comes ready to install with Black Powder Coat
- Easy bolt-on installation
- Weighs 3lbs
- BUILT 100% IN THE USA!!
- NOTE: Not compatible with Limited Edition 4Runners
- Installation Instructions
(3 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons Tacoma L59-112-R Heavy Duty Leaf Springs Pair for 2005-2023 (800-1200LBS)
- Suits Toyota Tacoma 2005-2023, lifts 2-2.25″ with at least 800LBS of constant load on the rear end
- Sold in pairs
- Each pack has 7 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
(10 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons Tacoma Snorkel Kit for 2016-2023 3.5L V6
- Suits 2016-2023 4×4 Toyota Tacoma with a 3.5L V6 Gas Engine
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- FOR INSTALLATION INSTRUCTIONS, CLICK HERE
(6 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons GS59-683 0-3″ Front Shocks Pair for 80 Series Land Cruiser
- Dobinsons GS59-683 0-3″ Front Shocks for 80 series and Lexus LX450
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- GS59-683 Specifications: 628mm extended, 370mm compressed, 60mm body size
(6 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Rear Adjustable Panhard Rod Track Bar | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(7 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons C59-329 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Heavy load rear coils to suit multiple Toyota/Lexus vehicles – scroll down for that list
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 410mm free height, 18mm wire diameter, 286LBF/IN Spring Rate
(23 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Suspension
Dobinsons C59-350 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 380mm free height, 18mm wire diameter, 730LB/IN Spring Rate
(19 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons Adjustable Rear Lower Control Arms Pair | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel, 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
(4 reviews) -
Accessories
Dobinsons 4Runner Snorkel Kit for 4Runner 5th Gen 2010-2024
- Dobinsons 4Runner Snorkel kit for the 5th Gen models from 2010 to 2024
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Sure, you have to drill some holes, but installing front or rear bumpers also requires a lot of trimming, so why not add a snorkel!!
(9 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons GS59-710 Pair Ext Travel Struts for Sequoia 08-22 + Tundra 07-21
- Suits 2008-2022 Toyota Sequoia and 2007-2021 Toyota Tundra
- These are extended travel. They have a “droop spacer” that should be removed for low lift heights so that the coil stays captured
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-710 Specifications: 615mm extended, 445mm compressed lengths, 54mm body size
- Sold in pairs
(6 reviews) -
Accessories
Dobinsons 4th Gen 4Runner Snorkel Kit for 2003-2009 V6 and V8
- Suits both V6 and V8 4th Gen 4Runners from 2003-2009
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Looks sick, everyone will ask you what it is and what does it do!!
- Instructions are digital only – CLICK HERE FOR INSTRUCTIONS
(8 reviews) -
Dobinsons
Dobinsons DD59-530K Front Diff Drop Kit | Tundra Sequoia Land Cruiser
- Suits 2007-2021 Toyota Tundra, 2008-2022 Toyota Sequoia and 2008-2021 Toyota Land Cruiser 200 Series
- Keeps CV angles at a good working angle when lifted
- Suitable for lifts over 2.0″
- Includes all necessary hardware
- Compliments Dobinsons 2″+ lifts for IFS Toyota vehicles
- Installation Instructions
(16 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons IMS59-50575 2.2″ IFP Long Travel Rear Shocks Pair
- Suits 2003-2023 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 2 – 3.5″ of lift
- Will not suit vehicles with KDSS (too long)
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- IMS59-50575 – Specifications. 720mm extended, 438mm compressed
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Can Use with Timbren extended rear bump stops with appropriate spacers in place
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stop extensions or suitable extended length bump stops are required, due to the longer compressed length of these shocks compared to stock
- Full 2 year limited warranty, no set rebuild time period
(17 reviews)
