Your cart is currently empty!
Shop
Showing 151–180 of 2166 resultsSorted by popularity
-
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60687 Rear 2.6″ IFP Shocks Pair | Land Cruiser 80 Series (4-5″ lift) 1990-1997
- Suits Land Cruiser 80 Series and Lexus LX450
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 680mm extended, 421mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
(18 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesFirestone 4135 Coil-Rite Rear Helper Airbags for 0-1.5″ Lift | 4Runner FJ Cruiser GX470 GX460
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 for 0-1.5″ of lift
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60713 2.6″ IFP Rear Shocks Pair | Toyota Sequoia 2008-2022
- Suits 2008-2022 Toyota Sequoia without rear air suspension, for lift heights between 0″ and 2.5″
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 343mm compressed length, 489mm extended length (these are extended travel over the GS59-713 shocks)
- Note: the video shows an IMS front strut that takes a coil. This listing is for the rear IMS shock, no adjustability.
(14 reviews) -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesDobinsons GS59-575 Rear Long Travel Shocks Pair
- Suits Toyota 4Runner 2003-2024 and FJ Cruiser (all years), and Lexus GX470 with 2-3.5″ of lift.
- Not suitable for vehicles with KDSS
- Sold as a pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Long Travel, 730mm extended, 425mm compressed
- Pin mount top, eyelet mount lower
- Recommended to run with Timbren Rear Bump Stops
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stop extensions or longer bump stops are required with these shocks!!
- Cannot be used on vehicles with KDSS
- Photos for illustration purposes
(15 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Rear 30mm Coil Spacer (Single) Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450, LX470 and 100 Series
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(2 reviews) -
Dobinsons
Dobinsons SC59-014 Pair of Strut Top Plates
- Made specifically for the 4×4 Toyota Tundra from 2022-2025+ and Toyota Sequoia from 2023-2025+ and 2022-2025+ Land Cruiser 300 Series
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
- Assembly Instructions
(9 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro Complete CV Boot Kit | Toyota Tundra Sequoia 2000-2006
- Complete CV boot replacement kit – Suits 2000-2006 Toyota Tundra and Sequoia
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(17 reviews) -
-
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50649 2.2″ IFP Rear Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 614mm extended, 409mm compressed
- Should be run with a suspension lift of 1.75″ or more
(15 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons DD59-532K Diff Drop Kit | Land Cruiser 100 Series and LX470 1998-2007
- Keeps CV angles at a good working angle
- Suits lift heights of 2.0″ and higher
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Powder coated black main differential cradle
- Use with Dobinsons longer travel front shocks and new UCA’s for maximum front end travel and proper articulation
- INSTALLATION INSTRUCTIONS
(6 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 5° Caster Plate Kit | Land Cruiser 80 Series 1990-1997
- Suits Land Cruiser 80 Series and Lexus LX450
- For 5″ to 7″ lift heights, realigns front caster angle
- Zinc plated steel with all hardware supplied, super heavy duty
- Simple bolt-on design with some grinding required
- Not necessary to remove OE bushes, saving time and money
- Optional RB59-536K replacement rubber bush kit available for Radius Arm to diff positions
- Installation Instructions
(2 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesTimbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops 1990-1997
- Suits Land Cruiser 80 Series and Lexus LX450
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Rear End
- Overall kit height = 8.25”
- Total deflected (compressed) height = 6”
- Amount of deflection (compression) = 2.25”
- NOTE: Bolts into the frame. Adding nutserts may be required depending on frame condition
- Oversized coils and wide tires without much offset could possibly contact the bump stops
- Clearancing of the bracket and the bump stop cup may be required on some long travel setups to avoid clearance issues with the coil springs
- Click here for instructions
(11 reviews) -
4Runner 3rd Gen (1996-2002)
Dobinsons C59-137V Rear Lifted Coils for Toyota 4Runner 3rd Gen – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Dobinsons C59-137V – 2″ rear lift – variable rate coils
(3 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
All Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro Complete CV Boot Kit | 03-09 4Runner FJ Cruiser GX470
- Complete CV boot replacement kit – Suits 2003-2009 4Runner, 2006-2009 FJ Cruiser, 2003-2009 Lexus GX470
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(18 reviews) -
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22
- Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(7 reviews) -
Control Arms - 80 SeriesFREE SHIPPING
within 48 US StatesDobinsons 80 Series Upper and Lower Rear Trailing Arms bundle 1990-1997
- Suits all 80 Series Land Cruisers and Lexus LX450 from 1990 to 1997
- Bundle of both the upper and lower rear adjustable control arms
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel, 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
(0 reviews) -
Coil Springs
Dobinsons C59-276 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair Teal
- 3rd Gen 4Runner 4×4 (1996-2002) – Lifts 2″ on a stock to medium load front end
- Toyota Tacoma 4×4 1998 to 2004 – 1.5″ with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- 362mm free height, 586LBF/in spring rate
- Sold in Pairs
- Also offered in Black Powder Coat
- This is a comparable option to OME 2880 coils, which are 365mm free height, 16mm wire, 500LBF/in spring rate
(18 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-649 Rear Twin Tube Shocks Pair – Comfort Option
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- GS59-649 is a comfort version (softer) of the GS59-651
- See full vehicle list below for fitment
- 591mm extended, 363mm compressed, 51mm body diameter
(9 reviews) -
Sequoia 2nd Gen (2008-2022)FREE SHIPPING
within 48 US StatesDobinsons Sequoia Lift Kit 1.75″-2.5″ for 2008-2022 5.7L V8 (All Options)
- Suits 2008-2022 Toyota Sequoia 4×4 V8 models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Twin Tube or IMS Monotube struts and shocks (more details below in description)
- Does not suit rear air suspension equipped models
- 2.5″ rear lift height requires shock extensions with twin tube shocks for proper travel, add it in the drop-downs below
- Front IMS struts assembly instructions
(9 reviews) -
Coil Springs - Lexus GX470
Dobinsons Rear Coil Spring Options for Lexus GX470 2003-2009 – Pair
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- C59-323 – Stock height up to 1/2″ lift
- C59-599 – 3/4-1″ with stock weight
- C59-505 – 1.25-1.5″ with stock weight
- C59-325 – 1.75-2″ with stock weight
- C59-327 – 2″ with 200-400lbs weight
- C59-329 – 2″ with 400-800lbs weight
- C59-331 – 2″ with 800-1200lbs weight (teal only)
- C59-675V – 2.5″ variable rate long travel, stock weight
- C59-677V – 3″ variable rate long travel, 400-600lbs weight
- C59-701V – 3″ variable rate long travel, 600-800lbs weight
- C59-749V – 3″ variable rate long travel, 800-1000LBS super extra heavy
(7 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-169 Rear Coil Springs | Land Cruiser – Pair Teal
- 80 SERIES and Lexus LX450 (1990-1997) – Dobinsons C59-169 1.75″ with up to 220lbs weight
- 100 SERIES and Lexus LX470 (1998-2007) – Dobinsons C59-169 – 1″ lift, linear rate, with stock weight. For slightly above OE stock height. Ideal if someone is doing AHC removal but doesn’t want to add lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 465/475mm free height, 227 LB spring rate
(16 reviews) -
Coil Springs
Dobinsons C59-476 1.75″ Front Coils for Toyota Sequoia 2008-2022 5.7L V8 – Pair
- Dobinsons C59-476 Front 45mm Lift Coils, sold as a pair – suits Toyota Sequoia 2008 to 2022 5.7L V8 models
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 367mm free height, 19mm wire, 685LBF/in rate
- Sold in Pairs
(16 reviews)$405.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tacoma 3rd Gen (2016-2023)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60446 2.6″ IFP Front Struts Pair | Tundra 2022+ and Sequoia 2023+
- Front IMS struts to suit Toyota Tundra 2022-2025+ and Sequoia 2023-2025+
- Can be used with OEM coils or Dobinsons lifted coils
- Suits 0-3″ of lift
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- IMS59-60446 specs – 540mm extended, 390mm compressed
- SOLD IN PAIRS
- Coil seat for IMS59-60446 should be set at 175mm (6.87″) from the strut bushing eye
- Photo for illustration purposes
(15 reviews) -
60 62 Series Land Cruiser (1980-1989)
Dobinsons HJ61-7L-R Rear Medium Load Leaf Springs Pair for 60 62 Series
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
- 50mm rear lift with 0-220LBS of additional weight
(10 reviews) -
SPCFREE SHIPPING
within 48 US StatesTax Return Sale, 5% off
Use Coupon TAXTIMESPC 25470 | UCA’s for Tacoma 2005-2023 Pair
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Now with updated maintenance-free sealed ball joints
- Installation Instructions
- We offer replacement ball joints as well
(10 reviews) -
Sequoia 1st Gen (2001-2007)
Dobinsons C59-345 Rear Coils for Toyota Sequoia 2001-2007 – Pair
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Sold in Pairs
- 425/425mm free height, 212LB/IN spring rate
- Each pair of coils lift 1.75″ over stock height
(15 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesFirestone 4108 Coil-Rite Rear Helper Airbags for 2-3″ Lift | 4Runner FJ Cruiser GX470 GX460
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 WITH 2-3″ of Lift
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Substitute Option – Air Lift 60769
- These are longer than the Firestone 4135 for lifted vehicles
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Sale!Long Range Tanks2 in stock now
Toyota Tacoma Long Range Replacement Fuel Tank 2005-2023 (33gal)
- Suits Toyota Tacoma 2005-2023 4×4 Short and Long Bed models (requires additional parts from below for some variants) (WILL NOT SUIT 2018+ ACCESS CAB LONG BED MODELS!!)
- This is a replacement tank that replaces your OE fuel tank, it holds 33 gallons instead of the stock 21 gallons and fills the same way an OE tank fills
- 33 gallon capacity, replaces the original tank
- Tank fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 5 hours by a professional
- Weight of tank without fuel is 90 LBS
- The fuel gauge will remain accurate, DTE will not. Once the E-light comes on there is 7 gallons remaining
- Part Number TTACDCR
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California due to SMOG rules. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(15 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesToyota Tundra Firestone Airbag & Cradle Bundle 2007-21 Tundra
- Suits Toyota Tundra 2007-2021
- Combination of Firestone airbags and an Air Lift airbag cradle kit for maximum suspension travel
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions: Installation Instructions
- Firestone Airbag Kits do not have a warranty when used with an Airbag Cradle Kit
- Enjoy full suspension travel and the benefits of air bags with the Air Lift Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Cradle mounts to top of leaf spring, airbag mounts to frame above only
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews)
