You may be interested in…

• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60685 Rear IMS Shocks | Land Cruiser 80 Series (6″ lift)

  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 730mm extended, 446mm compressed

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Tundra 2nd Gen (2007-2021)

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A710 3-Way Adjustable MRA Front Struts | Tundra 2007-2021

  • Pair of Struts only, no coils included and not preassembled
  • If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2007-2021 Tundra
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
  • See attached photo for correct hose routing, can vary depending on UCA’s used
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • SOLD IN PAIRS
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs – sold separately
  • Front coilover assembly instructions
  • New UCA’s are required for proper coilover and hose clearance, see all options
  • Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
  • Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
  • Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping

  $1,790.00 Add to cart
• 

  • 
  • 
  • 

  GX470 (2002-2009)

  Dobinsons 1″ to 3.5″ Lift Kit for Lexus GX470 (All Options)

  • Full Dobinsons Complete Suspension kit for Lexus GX470 from 2003 to 2009, with every possible option listed on one page
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
  • Select the type of struts and shocks you want as well as all possible add-ons down below
  • Choose from Dobinsons Classic Twin Tube shocks, IMS Monotube, or MRA 3-way adjustable remote resi shocks
  • See note below in description about KDSS models

  From $1,200.00 Select options
• Sale!

  

  • 
  • 
  • 

  Bronco 2021-2024+

  On Sale For Memorial Day!!

  RCI Full Skid Plate Package | 2021+ Ford Bronco 2/4 Door

  • Suits 2021+ Ford Bronco 2 door and 4 door models – Does not suit Bronco Sport models
  • Includes engine (two piece), transmission and transfer-case skid plates.
  • Protects expensive EPAS power steering unit, front differential, front cross-member, engine, engine bay, intercooler, sway bar disconnect (if applicable),, transmission, exhaust, oil pan, transfer-case, and more!
  • Compatible with 4×4 and Raptor models
  • Simple installation and removal of all subsections for maintenance
  • Extremely high clearance hugs the truck very tight and does not sacrifice ground clearance for protection
  • Smooth, flat surface that easily slides over obstacles
  • Steel version-black epoxy powder coated for rust resistant, durable and high quality finish
  • Installs in minutes
  • All hardware and installation instructions provided
  • Direct bolt on addition to existing factory attachment points, no drilling required
  • *May Not be Compatible with all 4+” Lift Kits (drop bracket kits)
  • Made in the USA

  $1,056.97 Original price was: $1,056.97.$951.00Current price is: $951.00. Select options
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s HD Aluminum Tie Rod Assembly | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
  • Massive 1.825″ 7075 SOLID Aluminum Tie Rod
  • Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
  • HD jam nuts
  • Serrated Lock Washers
  • The strongest JL/JT Tie Rod you can buy
  • Complete assembly from one side to the other, nothing else needed
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA
  • Also made in a steel DOM version

  $502.00 Select options
• 

  Brake Lines

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Black)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips
  • This set is BLACK in color

  $95.00 Add to cart
• 

  • 
  • 
  • 

  Bronco 2021-2024+

  Ford Bronco Diff Cover by ARB | 2021+

  • Suits 2021+ Ford Bronco 2-door and 4-door models with Dana 44 Rear Axle
  • High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
  • Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss\
  • Approach/departure angle optimized by angled exterior surface
  • Prolonged carrier bearing life due to extra support to the bearing alignment
  • Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
  • Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
  • Low profile drain plug design resists damage from obstacles
  • Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
  • Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
  • Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
  • Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
  • Made in Red or Black, choose below

  $187.00 Select options
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s | Toyota Tacoma 2005-23

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
  • Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
  • Complete kit for both left and right hand side
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer

  $1,195.00 Add to cart
• 

  Teraflex

  Teraflex JL: Rear Track Bar Axle Bracket Kit (2.5–4.5” Lift)

  • The TeraFlex JL: Rear Track Bar Axle Bracket Kit corrects vehicle roll center
  • Restores factory handling
  • Reduces body roll on lifted JL Wrangler/Unlimited models
  • Multiple mounting locations allows neutral lateral alignment of the rear axle on JL models with 2.5–4.5” lifts
  • Bolt-on bracket mounts to the rear axle
  • Drilling is required
  • Installation Instructions

  $116.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Bronco 2021-2024+

  On Sale For Memorial Day!!

  RCI Ford Bronco Aluminum Roof Rack | 4-door Hardtop 2021+

  • Suits Ford Bronco 4-door Hardtop models 2021+ (will not fit soft top models or 2-doors)
  • Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, RotoPax, spare tire,  bike mounts, roof baskets, etc.
  • Unique design allows removal of all three front roof panels with the rack in place
  • Side panels feature removable filler panels for a superior finished look (simply take them off when you want to remove the roof, or leave them off if you prefer!)
  • Heavy duty design will easily support roof top tents and heavy gear
  • 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
  • All aluminum components undergo a CNC deburring process to eliminate sharp edges for a high end, finished appearance
  • T-Slot comes machined to accept 1/4″ nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
  • Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
  • Includes rubber trim and all necessary hardware for installation
  • Front fairing designed to accommodate up to a 42″ light bar
  • Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
  • Entirely bolt on design utilizes clamp system and OEM Ford mounting studs to secure to the truck
  • Includes a filler piece for each side for a completed look that can be uninstalled in order to take off roof panels without removing the rack
  • Rack is less than 4″ above highest point of the truck
  • Industry standard T-slot cross-bars are compatible with hundreds of accessories
  • Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
  • Includes black stainless steel hardware, and trim
  • Easy bolt together assembly, takes about 45 minutes to install
  • All hardware and installation instructions provided
  • Weighs 54lbs
  • Made in the USA
  • See the Video below to show how the roof panels come off with the rack installed

  $1,199.99 Original price was: $1,199.99.$1,080.00Current price is: $1,080.00. Add to cart
• 

  • 
  • 
  • 

  GX460 (2010-2023)

  Dobinsons 1.5-3.5″ Lift Kit for Lexus GX460 2010 to 2023 (all options)

  • Every suspension option from Dobinsons to lift your Lexus GX460 all on one page
  • Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs
  • You can choose to upgrade to the higher end IMS or MRA struts and shocks on this page in the drop down menus

  From $1,200.00 Select options
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  Bump Stops

  Teraflex JL: Progressive Bump Stop Kit – Front & Rear (0-4.5″ Lift)

  • JL specific tuned for high-speed performance
  • Foam Progressive Bump Stops simply pop-in to the existing factory locations
  • Replaces factory foam bump stops
  • Performance-tuned closed-cell nitrogen charged microcellular polyurethane technology
  • Absorbs large impact energy progressively during compression to prevent bent axle tubes
  • Prevents damage to suspension components, shock absorbers, and fenders
  • Quiet movement and function (no pad-slap clunk)
  • Maintains progressive nature during all conditions
  • Will not fade or dissipate under extended heavy use
  • Unaffected by temperature extremes – retains flexibility in thermal or subzero temps
  • Resistant to all types of environmental conditions (mud, salt, sand, dust, etc.)
  • Subzero temperature flexibility reduces fatigue
  • Compatible w/ all suspension systems that retain factory axle spring mounting locations
  • Maintenance-free, all composite construction
  • Simple bolt-on installation
  • Patented technology
  • Limited lifetime warranty
  • Installation Instructions

  $116.00 Add to cart
• 

  • 
  • 

  Timbren

  Ships FREE !!
  within 48 US States

  Timbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s

  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series

  • Specs:

    • 2,000 lb capacity
    • 4,800 lb bump load capacity
    • Overall kit height = 5”
    • Total deflected (compressed) height = 2.75”
    • Amount of deflection (compression) = 2.25”
  • Click here for instructions
  • Installation video from Exit Offroad
  • Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs.  Timbren make 2 options, they do not include any longer bolts which may be required
    • A25722-90F00 (1/2″ spacer)
    • A25723-90AD00 (1″ spacer)

  $269.36 Add to cart
• 

  Brake Lines

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips

  $95.00 Add to cart
• 

  On Backorder

  • 
  • 

  4Runner 5th Gen (2010-2024)

  Dobinsons GS59-700 Front Struts | FJ Cruiser 4Runner GX460 2010-2024

  • Dobinsons GS59-700 front struts for 2010-2016 Toyota FJ Cruiser, 2010-2024 Toyota 4Runner, Lexus GX460, and Prado 150 – twin tube design
  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Dobinsons GS59-700 Specifications: 555mm extended, 432mm compressed, 50mm body size

  $350.00 Add to cart
• 

  Dobinsons

  Dobinsons Front 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator

  • Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
  • Adds 1/2″ of lift height
  • High Quality Polyurethane, maintains height over time
  • Perfect fit between OE isolator and coil seat
  • Sold in Pairs
  • Lasts longer than rubber
  • Easy to add lift height for worn coils or when added weight has squatted down the front

  $30.00 Add to cart
• 

  60 62 Series Land Cruiser (1980-1989)

  Dobinsons PB59-1019K Polyurethane Leaf Spring Bush Kit for Toyota

  • Suits 40/45 Series and 60 Series Land Cruisers with 35mm spring eyes front and rear, and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999 and FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
  • For any lift height, or no lift. These are OE replacement bushings.
  • Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
  • Pressing of OE bushings may be necessary during removal and installation
  • Replaces OE bushings in all 6 positions of leaf springs in the front or rear
  • Order 2 kits to do front and rear of the vehicle
  • Greasable bolts are sold in pairs, sold separately

  $100.00 Add to cart
• 

  • 
  • 
  • 

  Front Bumpers

  WARN 101330 Elite Series Stubby Front Winch Bumper for JL & JT

  • Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
  • This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
  • Photos are shown with all added accessories.  This is for the base bumper only, no winch or under protection plates are included
  • Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
  • Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
  • Winch Positioned To Deliver Maximum Airflow To The Engine Bay
  • Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
  • Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
  • Limited 1 Year Warranty
  • Type: 1-Piece
  • Tubular: No
  • Air Bag Compatible: No
  • Finish: Powder Coated
  • Color: Black
  • Material: Steel
  • Drilling Required: No
  • Hitch Type: Without Receiver
  • Maximum Gross Trailer Weight: Without Receiver
  • Maximum Tongue Weight: Without Receiver
  • With Grille Guard: No
  • With Grille Screen: No
  • With Bull Bar: Yes
  • With Winch Mount: Yes
  • Winch Compatible: Yes
  • Tow Hooks: With Tow Hook Mounts
  • D-Rings: With D-Rings
  • With Light Cutouts: No
  • Light Type: No Lights
  • With Mounting Hardware: Yes
  • With Skid Plate: No
  • With Spare Tire Mount: No
  • With License Plate Mount: Yes
  • With Jacking Points: No
  • With CB Antenna Mount: No
  • Estimated Install Time (Hours): 2
  • Installation Instructions
  • Optional Front Skid Plate Can Be Added

  $999.99 Add to cart
• 

  • 
  • 
  • 

  Performance Upgrades - Lexus GX460

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Powerbrake D-Line HP Rotor and Pad Kit | Lexus GX460 Rear

  • Suits Lexus GX460 2010-2023 Rear
  • Also available for the FRONT
  • Powerbrake D-Line Features
    • Rotors are cast from a proprietary high carbon cast-iron alloy.
    • Rotors are machined to tolerances up to three times tighter than the industry norm.
    • All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
    • Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
    • Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
    • Matched high friction PB05 brake pads take the guesswork out of pad selection.
    • Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
  • Powerbrake D-Line Benefits at a Glance
    • Reduced stopping distances in both wet and dry conditions.
    • Reduced brake fade and improved brake consistency.
    • Improved initial brake response (bite).
    • Improved brake modulation particularly during emergency stops.
    • Improved resistance to rotor distortion (warping) and cracking at high temperatures.
  • What’s Included in Powerbrake D-Line?
    • 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
    • An axle set of matched PB05 high-performance brake pads – Made in Japan.
    • Fits as per a standard rotor and pad change, using the vehicle’s original calipers.

  $840.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks | 80 Series 6″ Lift

  • Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 714mm extended, 440mm compressed
  • Installation Instructions of the MRA Shocks

  $1,350.00 Add to cart
• 

  On Backorder

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  ETA is July 2024

  Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460

  • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
  • Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Works for any lift height, as factory alignment correction will be enhanced with these
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Curved washers face outwards away from bushings during installation, per the product video
  • Product Video
  • Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
  • Also sold without ball joints

  $795.00 Add to cart
• 

  Upper Control Arms

  Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus

  • This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
  • Commonly referred to “as the long UCA bolt”
  • Services both control arms at once
  • Does not come with any washers.  New aftermarket UCA’s usually come with the necessary washers
  • Vehicle Fitment
  • • 2003-2009 Toyota 4Runner
    • 2010-2024 Toyota 4Runner
    • 2005-2015 Toyota Tacoma
    • 2016-2023 Toyota Tacoma
    • 2006+ FJ Cruiser (all years)
    • 2003-2009 Lexus GX470
    • 2010-2023 Lexus GX460
    • Toyota Hilux Vigo
    • Toyota Hilux Revo
    • Toyota Fortuner
    • Toyota Prado 120
    • Toyota Prado 150
  • Bolt Grade: 10.9
  • Head Drive Type: Hex
  • Length: 351 mm
  • Material: Steel
  • SAE or Metric: Metric
  • Thread Diameter: 14 mm
  • Thread Length: 28.7 mm
  • Thread Size: 14 mm
  • Thread Type: Fine

  $69.00 Add to cart
• 

  • 
  • 
  • 

  Bronco 2021-2024+

  Ships FREE !!
  within 48 US States

  King 4WD Ford Bronco Roof Rack | 4-Door Hardtop 2021-2023+

  • Suits 2021-2023+ Ford Bronco 4-Door Hard Top Models (will not suit the compact SUV Bronco Sport models)
  • Photos are for Illustration purposes and may change from final production model
  • Mount an Awning or Rooftop Tent to your Ford Bronco
  • Bolt-on Installation
  • Allow for 2 to 2 ½ Hours for Installation
  • No, the roof top panels cannot be removed once the roof rack has been installed
  • Full Instruction Guide Included and USA-based tech support available
  • Full Steel Construction, protected by a 2-stage black textured powder coat
  • Heavy duty welds help keep the rack stable
  • Stainless-steel hardware
  • King 4WD Roof Rack comes with a 4 Year Limited Warranty. King 4WD warranty includes coverage for products with manufacture defects in materials and workmanship

  $1,099.99 Add to cart
• 

  • 
  • 
  • 

  Shocks + Struts - 3rd Gen 4Runner

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A225 3-Way Adjustable Rear Shocks | 3rd Gen 4Runner

  • Suits 3rd Gen Toyota 4Runner 1996-2002
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your springs, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • 530mm extended length, 344 compressed
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes

  $1,150.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: Solid Center
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s Front Track Bar Mount Brace | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • This is a brace that supports the mount between the steering box and the track bar bracket
  • Constructed of 1/4-inch thick laser-cut steel
  • CNC formed for an exact fit
  • E-coated in black for durability and looks
  • Includes Grade 8 hardware
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA

  $146.00 Select options
• 

  Excluded

  Dobinsons Tacoma L59-110-R Leaf Springs Pair for 2005-2023 (0-220LB Load)

  • Suits 2005-2023 Toyota Tacoma.  Lifts dual cab short beds 2-2.25″ with 0-220LBS load, and 1″ on a Long Bed
  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Design features include Drawn, tapered and thinned leaf ends
  • Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
  • Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
  • Click here for Extra Leaf Kit for additional load support
  • These are leaf springs ONLY and don’t come with bushings or any other parts.  Scroll down for add-ons that go with these springs
  • Sold as a pair – they are not side-specific

  $590.00 Add to cart
• 

  New Item

  • 
  • 
  • 

  Shocks - 80 Series Land Cruiser

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60689 Front IMS 2.6″ Shocks | 80 Series – 31″ Extended

  • 31″ long 2.6″ body shocks for the front of a Toyota Land Cruiser 80 Series
  • For custom use, extreme front long travel shocks, longer than the Dobinsons 6″ lift shocks
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 790mm (31.1″) extended, 467mm (18.4″) compressed
  • Bump stop extensions are required to prevent bottom outs, depending how you mount the shocks
  • Photo for illustration purposes

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s HD Tie Rod Assembly | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
  • Massive 1.75″ x 0.250-wall DOM tubing Tie Rod bar
  • Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
  • HD jam nuts
  • Serrated Lock Washers
  • The strongest JL/JT Tie Rod you can buy
  • Complete assembly from one side to the other, nothing else needed
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA
  • Also made in an Aluminum version

  $427.00 Select options
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50700 Front IMS Struts | 2010+ 4Runner FJ Cruiser GX460 (0-2.5″ Lift)

  • Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • 560mm extended, 420mm compressed
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height
  • Watch the video on IMS here: https://youtu.be/Npfx40VD3kM

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Bump Stops

  Wheeler’s Rear Superbumps for 95+ Tacoma and 99-06 Tundra

  • Suits the following vehicles: 1995-2023 Tacoma and 1999-2006 Toyota Tundra
  • Bolts in easily and quickly to replace the firm factory bump stops
  • Includes necessary bump stops (2), goes under the factory u-bolts
  • Made of a super durable micro-cellular polyurethane formula
  • Provides controlled, progressive and comfortable bottoming response from your front suspension
  • Installation Instructions

  $221.00 Add to cart