Your cart is currently empty!
4Runner 5th Gen (2010-2024)
Showing 31–60 of 203 resultsSorted by popularity
-
4Runner 5th Gen (2010-2024)Dobinsons 4Runner FJ GX460 Swaybar Drop Bracket Kit 2010-2024
- Suits 2010-2024 Toyota 4Runner 4×4 models, 2010+ Toyota FJ Cruiser, 2010-2023 Lexus GX460 (without KDSS)
- Lowers stock front sway bar for better working angle
- Includes machined aluminum spacers
- Easy bolt-on installation
- INSTALLATION INSTRUCTIONS
- Includes new correct grade longer hardware
- Recommended for lift heights of 2″ or more to correct sway bar operating angle
- Includes Radiator Drop Brackets.
- Kit Includes
- Bolts / Washers
- 4x M10x1.25 – 20mm long (8mm Allen)
- 6x M10x1.25 – 40mm long (18mm Socket/Wrench)
- 4x M10x1.25 – 20mm long (16mm Socket/Wrench)
- 10x M10 Washers
- Spacers
- 2x Round Spacers (Radiator Support)
- 4x Square Spacers (Lower Radiator Support)
- 2x Rectangular Spacers (Sway Bar Spacer)
- Bolts / Washers
- NOT for vehicles with KDSS
(4 reviews) -
SPCFREE SHIPPING
within 48 US StatesSPC 25480 | UCA’s Pair for 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2024 Toyota 4Runner, 2006-2017 Toyota FJ Cruiser, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- New maintenance-free sealed ball joint design
- Installation Instructions
- We offer replacement ball joints as well
(11 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons C59-323 Stock Height Rear Coil Springs for GX460 GX470 FJ 4Runner 03-23 – Pair
- Suits Lexus GX470, GX460 and 2003-2024 Toyota 4Runner and FJ Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 375mm, 17mm wire, 220LB Rate
- Note: Whilst these were made as stock replacement springs, some customers report a little lift over OE stock height. They should sit between 22-22.5″ from the center of the hub up to the fender. Variations in vehicle models, weight, and how the vehicle is loaded can affect the final ride height
- If you regularly tow or carry heavy loads, consider adding the Timbren SES Kit for added support
(16 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 4th Gen (2003-2009)
Dobinsons C59-701V Rear UHD Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Made in Australia
- Sold in Pairs
- 500mm free height, 17mm wire diameter, 210-245LBF/IN variable spring Rate
(21 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series
-
Specs:
- 2,000 lb capacity
- 4,800 lb bump load capacity
- Overall kit height = 5”
- Total deflected (compressed) height = 2.75”
- Amount of deflection (compression) = 2.25”
- Click here for instructions
- Installation video from Exit Offroad
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90F00 (1/2″ spacer)
- A25723-90AD00 (1″ spacer)
(13 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/IN variable spring rate
(15 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 4th Gen (2003-2009)
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons C59-296 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 378mm, 17mm wire, 586LB Rate
(17 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Bilstein
Bilstein 33-313146 – 5100 Series Rear Shock
- Suits 2003-2024 Toyota 4Runner, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460, 2006-2017 FJ Cruiser
- Suits 0-2″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 23.03 Inch
- Compressed Length (IN): 14.91 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: No
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- Sold individually
(3 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA 4Runner Lift Kit | 2010-24 (1-3.5″)
- Suits Toyota 4Runner 5th Gen 4×4 from 2010 to 2024
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- The more lift height you add, the more parts you need, so read the subsection headings below
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
- Resi Installation Installations of Front, and Rear
- Front height adjustment instructions
- Suspension Installation Video
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro 2014-2024 4Runner Windshield Washer Bottle Skid – Powder Coated
- Great addition to your 2014-2024 4Runner if you’ve added a high clearance cut to the side and have left your washer bottle exposed
- Recommended to be added when using the All Pro High Clearance Side Supports
- Can be used with any aftermarket bumper, easily attaches to the body mount
- Made of 11 GA steel
- Comes ready to install with Black Powder Coat
- Easy bolt-on installation
- Weighs 3lbs
- BUILT 100% IN THE USA!!
- NOTE: Not compatible with Limited Edition 4Runners
- Installation Instructions
(3 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons C59-329 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Heavy load rear coils to suit multiple Toyota/Lexus vehicles – scroll down for that list
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 410mm free height, 18mm wire diameter, 286LBF/IN Spring Rate
(23 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Suspension
Dobinsons C59-350 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 380mm free height, 18mm wire diameter, 730LB/IN Spring Rate
(19 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
AccessoriesFREE SHIPPING
within 48 US StatesDobinsons 4Runner Snorkel Kit for 4Runner 5th Gen 2010-2024
- Dobinsons 4Runner Snorkel kit for the 5th Gen models from 2010 to 2024
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Sure, you have to drill some holes, but installing front or rear bumpers also requires a lot of trimming, so why not add a snorkel!!
(9 reviews) -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50575 2.2″ IFP Long Travel Rear Shocks Pair
- Suits 2003-2023 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 2 – 3.5″ of lift
- Will not suit vehicles with KDSS (too long)
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- IMS59-50575 – Specifications. 720mm extended, 438mm compressed
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Can Use with Timbren extended rear bump stops with appropriate spacers in place
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stop extensions or suitable extended length bump stops are required, due to the longer compressed length of these shocks compared to stock
- Full 2 year limited warranty, no set rebuild time period
(17 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons C59-238 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 375mm, 17mm wire, 586LB Rate
(17 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A575 3-Way Adjustable MRA Long Travel Rear Shocks Pair
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 & GX460 without KDSS, Toyota Prado 120 & 150, suitable for 2 – 3.5″ of lift
- CANNOT BE USED WITH KDSS
- 3-way adjustable valving – adjust high and low speed compression and rebound
- MRA59-A575 – Specifications. 730mm extended, 443mm compressed
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Can Use with Timbren Rear Bump Stop Kit
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stops extensions or longer bump stops are required!!
- Full 2 year limited warranty, no set rebuild time period
- Now comes with a longer hose and different mounting instructions
(21 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A574 3-Way Adjustable MRA Extended Travel Front Struts Pair
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, suitable for 2 – 3.5″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Height adjustable with a fully threaded body
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Extended Travel – 575mm at full extension, 420mm compressed
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
- Resi installation instructions
(18 reviews) -
Bump Stops & Spacers
Wheeler’s Front Superbump Set for Toyota & Lexus Trucks & SUV’s
- Suits the following vehicles: 2005-current Tacoma, 2003-2024 4Runner, all FJ Cruiser years, Lexus GX470 and GX460, 2007-2021 Tundra, 2022+ Tundra, 2008-2024 Sequoia
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), hardware, and an Allen wrench for installation
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Optional spacers and longer hardware are sold separately for fine tuning of bump stop clearances
- Installation Instructions
(8 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons C59-749V Rear Extremely HD Long Travel Coil Springs | Toyota and Lexus – Pair
- Dobinsons C59-749V Give this lift and suits these models:
- 3.0″ – Toyota 4Runner 5th Gen – 2010 to 2024 – w/850-1000LBS Load Maximum Flex Coils
- 3.0″ – Toyota 4Runner 4th Gen – 2003 to 2009 – w/750-900LBS Load Maximum Flex Coils
- 3.5″ – Toyota FJ Cruiser – all years – w/850-1000LBS Load Maximum Flex Coils
- 3.0″ – Lexus GX470 – w/750-900LBS Load Maximum Flex Coils
- 3.0″ – Lexus GX460 – w/850-1000LBS Load Maximum Flex Coils
- Super Heavy Long Travel and Variable Rate coils available worldwide for Toyota and Lexus SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Important: Read first line below in description before proceeding!!!
- 500mm free height, 18mm wire, 198-300LB variable rate, usually around 270LB at loaded height
(17 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
-
Dobinsons
Dobinsons CV Boot Kit Inner & Outer Bundle | Tacoma 4Runner FJ GX470 GX460
- Complete INNER and OUTER kit includes 2 new OUTER boots, 2 new INNER boots, grease, and required clamps – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round on the outer boots
- Inside shape is hex on the inner boots
- These still install the old fashioned way without custom stretch boot tools needed
(17 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
(8 reviews) -
4Runner 5th Gen (2010-2024)
Dobinsons GS59-574 Pair Extended Travel Struts FJ Cruiser 2010+ 4Runner 2010+ GX460
- Suits Toyota FJ Cruiser 2010+ and Toyota 4Runner 5th Gen 2010-2024, and Lexus GX460 (all years) for 2.0″ to 3.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-574 Specifications: Extended Travel – 575mm extended, 430mm compressed, 54mm body size
- Dobinsons GS59-574 struts add 1″ to the listed coil spring that are used with them, due to the raised coil seat. They are also longer than stock for taller lifts
- Example: Use a 2″ lift spring with these struts to get 3″ of lift
(6 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A700 3-Way Adjustable MRA Front Struts Pair
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
- The more you lift it, the less droop you will have left in the front end
- Height adjustable with a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- MRA59-A700 – 560mm extended, 420mm compressed
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions on setting coil seat height
- Resi installation instructions
(18 reviews) -
Dobinsons
Dobinsons Front Coil Spring Options for Toyota 5th Gen 4Runner 2010-2024 – Pair
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- C59-238 – Stock front end, low height 3/4″ to 1″
- C59-296 – Stock front end, 1.5″ lift
- C59-300 – Stock front end, 1.75-2.0″ lift
- C59-302 – Stock – 2.5″ | with 110-150lbs – 2″
- C59-314 – Stock – 3″ | with 110-220lbs – 2.5″
- C59-350 – With 220-300lbs – 1.5″ | Heavy rate coils
- C59-352 – With 220-300lbs – 2″ | Heavy rate coils
- C59-354 – With 220-300lbs – 2.5″ | Heavy rate coils
- **None of these coils below suit TRD Pro Struts, but these do
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
(6 reviews) -
Bump Stops & Spacers
Dobinsons Rear Upper Coil Isolators | 4Runner FJ Cruiser GX470 GX460
- Pair of aftermarket upper rubber coil isolators for Toyota and Lexus SUV’s
- These sit on top of the rear coil springs to properly isolate them from the frame, and also add the internal bump stop that these vehicles are intended to have
- If you have had an airbag conversion done incorrectly, or if you had to modify your isolators to add air bags and now need to go back, these are what you need
- Sits on top of rear coils
- Aftermarket version of the OEM Toyota Part Number 48302-35050
- OE quality upper rubber coil isolators with built-in bump stops
- Sold as a pair, 1 per vehicle needed
- Suits:
- 2003-2024 Toyota 4Runner
- 2007-2019 Toyota FJ Cruiser
- 2002-2009 Lexus GX 470
- 2010-2023 Lexus GX 460
(8 reviews)
