Your cart is currently empty!
Tundra 2nd Gen (2007-2021)
Showing 1–30 of 96 resultsSorted by popularity
-
Full Suspension Kits - Tundra 2nd Gen (12)
-
Skid Plates, Sliders, Bumpers, Racks - Tundra 2nd Gen (17)
-
Fuel Tanks - Tundra 2nd Gen (1)
-
Performance Upgrades - Tundra 2nd Gen (28)
-
Struts + Shocks - Tundra 2nd Gen (15)
-
Leaf Springs - Tundra 2nd Gen (11)
-
Control Arms - Tundra 2nd Gen (9)
-
DobinsonsOn Sale All November!!
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
(12 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
Tundra 2nd Gen (2007-2021)On Sale All November!!
Dobinsons GS59-710 Pair Ext Travel Struts for Sequoia 08-22 + Tundra 07-21
- Suits 2008-2022 Toyota Sequoia and 2007-2021 Toyota Tundra
- These are extended travel. They have a “droop spacer” that should be removed for low lift heights so that the coil stays captured
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-710 Specifications: 615mm extended, 445mm compressed lengths, 54mm body size
- Sold in pairs
(6 reviews) -
DobinsonsOn Sale All November!!
Dobinsons DD59-530K Front Diff Drop Kit | Tundra Sequoia Land Cruiser
- Suits 2007-2021 Toyota Tundra, 2008-2022 Toyota Sequoia and 2008-2021 Toyota Land Cruiser 200 Series
- Keeps CV angles at a good working angle when lifted
- Suitable for lifts over 2.0″
- Includes all necessary hardware
- Compliments Dobinsons 2″+ lifts for IFS Toyota vehicles
- Installation Instructions
(16 reviews) -
200 Series Land Cruiser (2008-2021)On Sale All November!!
Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series – all years
- Toyota 300 Series Land Cruiser
- Lexus LX570 – all years
- Toyota Tundra – 2007 to 2021
- Toyota Tundra 2022+
- Toyota Sequoia – 2008 to 2022
- Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
(19 reviews) -
Bump Stops & SpacersOn Sale All November!!
Wheeler’s Front Superbump Set for Toyota & Lexus Trucks & SUV’s
- Suits the following vehicles: 2005-current Tacoma, 2003-2024 4Runner, all FJ Cruiser years, Lexus GX470 and GX460, 2007-2021 Tundra, 2022+ Tundra, 2008-2024 Sequoia
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), hardware, and an Allen wrench for installation
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Optional spacers and longer hardware are sold separately for fine tuning of bump stop clearances
- Installation Instructions
(8 reviews) -
Tundra 2nd Gen (2007-2021)On Sale All November!!
Dobinsons Greasable Tundra Leaf Spring Bushing Kit | Tundra 2007-2021
- Suits 2007-2021 Toyota Tundra
- For any lift height, or no lift. These are OE replacement bushings
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Each half bushing has a part number on it. Here’s the orientation of them:
- The PB59-1540 go in the front position, towards the front of the vehicle
-
The PB59-1503 go in the shackle end of the leaf spring
-
The PB59-1514 go in the top of the shackle, on the chassis to shackle mount
(4 reviews) -
Tundra 2nd Gen (2007-2021)On Sale All November!!
Dobinsons Rear U-Bolts for Toyota Tundra 2007-21 (UB59-437K) (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- These are a 30mm longer version of UB59-453-2K Ubolts
- Photo for illustration purposes. These are square at the top
(7 reviews) -
SuspensionOn Sale All November!!
Dobinsons IMS59-60710 2.6″ IFP Front Struts Pair | Toyota Tundra & Sequoia
- For 1.75-3.0″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- Recommended to run with Dobinsons coils. OE coils may contact the thicker shock body
- TRD Pro models should start at the 2nd clip up to add 1/2″ of coil seat height, which equals the 1″ of lift the PRO’s come with when new
- ASSEMBLY INSTRUCTIONS
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 615mm extended, 445mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- If you are buying parts separately (coils and struts) and want them preassembled prior to shipping, add this product to your cart also
(13 reviews) -
Tundra 2nd Gen (2007-2021)On Sale All November!!
Dobinsons Toyota Tundra Greasable Shackle Kit Pair for 2007-2021
- Suits Toyota Tundra 2007-2021
- Recessed twin hole greasable design
- Reduces friction in bushes (included), creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- NOW Includes bushings for top and bottom of the shackles
- Use Dobinsons SP59-060 Greasable Pin Kit on the fixed ends of the leaf springs
(7 reviews) -
Bump Stops & SpacersOn Sale All November!!
Dobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
(10 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Toyota Tundra Firestone Airbag & Daystar Cradle Bundle 2007-21 Tundra
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions: Installation Instructions
- Firestone Airbag Kits do not have a warranty when used with Daystar Airbag Cradle Kit
- Enjoy full suspension travel and the benefits of air bags with the Daystar Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough Daystar polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Your Daystar Air Bag Cradle Kit is backed by a Lifetime Warranty
- Daystar cradle mounts to top of leaf spring, airbag mounts to frame above only
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
SuspensionOn Sale All November!!
Dobinsons GS59-711 Pair of Rear Shocks for Toyota Tundra 2007-2021
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-711 Specifications are 622mm extended, 380mm compressed, 54mm body size
(6 reviews) -
SuspensionOn Sale All November!!
Dobinsons IMS59-60711 2.6″ IFP Rear Shocks Pair | Toyota Tundra 2007-2021
- Suits 2007-2021 Toyota Tundra, for lift heights between 0″ and 2.5″
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 642mm extended, 401mm compressed lengths
- Note: the video shows an IMS front strut that takes a coil. This listing is for the rear IMS shock, no adjustability.
(17 reviews) -
SPCFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!SPC 25490 | UCA’s for 2008-22 Sequoia & 2007-21 Tundra Pair
- Suits 2008-22 Toyota Sequoia & 2007-21 Toyota Tundra
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Now with new updated design maintenance-free ball joints
- Installation Instructions
- We offer replacement ball joints as well
(13 reviews) -
Tundra 2nd Gen (2007-2021)On Sale All November!!
Dobinsons L59-120-R Rear Leaf Springs Pair for Toyota Tundra 07-21
- L59-120-R – 4 + 2 Leaves (6 leaf pack) Raised Height (55mm, 2.25″ Lift) Heavy Duty for stock to medium loads
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
- Note: Greasable bush kits (PB59-1102K), greasable pins (SP59-060), and u-bolts (UB59-437K) are available separately. These do not come with bushings. See links below
- If you carry more than 200-300LBS of constant rear weight and want to maintain more height and load support, you can add-a-leaf to each pack for increased load support and to maintain lift height – CLICK HERE
(5 reviews) -
Tundra 2nd Gen (2007-2021)On Sale All November!!
Dobinsons C59-778 Front 2.5″ Lift Coil Springs Tundra 4×4 2007-2021 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Sold in Pairs
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- 2.5″ lift with stock front end weight – lift heights may vary due to vehicle variances and different cab configurations
- 662LBF/in spring rate, 425mm free height
(17 reviews)Original price was: $405.00.$344.25Current price is: $344.25. Select options This product has multiple variants. The options may be chosen on the product page -
AccessoriesOn Sale All November!!
Dobinsons Tundra Snorkel Kit for 2014-2021 5.7L V8
- Specifically made for the 2014-2021 Toyota Tundra with 5.7L V8 Motor and stock air box
- Works with TRD Pro air box too
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(6 reviews) -
DobinsonsOn Sale All November!!
Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22
- Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(7 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Timbren ABSOSR Active Off Road Rear Bump Stops | Toyota Nissan Chevy
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 2005-2023 Tacoma (using standard u-bolts), 2000-2021 Toyota Tundra, 2005-2023 Nissan Frontier, 2015-2024 Chevy Colorado
- Click here for instructions
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90P00 (1/2″ spacer)
- A25723-90AH00 (1″ spacer)
(13 reviews) -
DobinsonsOn Sale All November!!
Dobinsons Tundra 2.25-3.0″ Suspension Kit for 2007-2021 Double Cab 4×4 V8
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to provide comfort and lift
- Multiple coil colors available
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- NEW IMS struts and shocks now available – Adjustable height front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- Front IMS assembly instructions
(10 reviews) -
Tundra 2nd Gen (2007-2021)On Sale All November!!
Dobinsons L59-121-R Rear Leaf Springs Pair Tundra 2007-2021
- Suits Toyota Tundra 2WD and 4WD Rear ends from 2007 to 2021 – lifts 2.25″ with 400LBS constant rear end load (For campers, and heavy constant load rear ends)
- There are 7 leaves in this pack
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Enough for 1 Vehicle
- Photo for illustration purposes only
- Scroll down to add bushings and related parts (they don’t come with anything automatically)
(8 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King Toyota Tundra Tubular Ball Joint UCA’s Pair – Tundra Sequoia
- Suits 2007-2021 model Toyota Tundra 2nd Gens, and 2008-2022 Sequoia 2nd Gens
- Proudly made in the USA
- CAD designed, Formed steel bushing gussets
- Constructed with 4130 chromoly tubing
- Probearing SilentSpin Hybrid bushings
- Maintenance free bushings
- Durable black powder coat
- Preassembled with heavy duty Moog ball joints for fast installation
- Includes ball joint caps
- Zinc plated components for corrosion resistance
- Professionally MIG welded, powder coated black
- Made in the USA
(4 reviews) -
SuspensionOn Sale All November!!
Dobinsons 30mm (1.2″) Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only designed to be used with OE height leaf springs
- Built-in correction for pinion angle
- Full vehicle range is listed down below
- Installation Instructions
(7 reviews) -
DobinsonsOn Sale All November!!
Dobinsons Tundra 2.25-3.0″ Quick Ride Kit or AAL for 2007-2021 4×4 V8 (all options)
- Complete Quick Ride or AAL suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- In the back, you can either lift your truck with the Dobinsons Quick Ride (block and U-bolt) Kit or the Wheeler’s Add-a-leaf Kit
- Coils are specifically suited to provide comfort and lift
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Affordable suspension system without requiring new rear leaf packs
(13 reviews) -
Tundra 2nd Gen (2007-2021)FREE SHIPPING
within 48 US StatesOn Sale All November!!Toyota Tundra Overland Tailgate Table (2007-2021)
- The stock tailgate panel is a wasted opportunity that you can easily correct with the All-Pro Off-Road Overland Tailgate Table.
- The All-Pro Off-Road Overland Tailgate Table turns your opened tailgate into a multi-functional platform for all of your overlanding, camping, fishing, and hunting needs.
- The durable food-grade polyethylene cover can be used as a cutting board while supporting your favorite camp stove.
- A slot on the left side and cup-holders on the right side prevent items from rolling away.
- Requiring only basic hand tools, reusing original hardware, and 3-minutes of time, this is one of the easiest modifications you will ever make on your truck and one every Tacoma owner should do.
- Features a ruler in 1-inch (imperial) increments along the edge of the table adding convenience when measuring fish, rope, etc.
- Made in 2 different styles, choose from the divided cutting board configuration, or the smooth configuration with only round cutouts on the end.
- Thickness is right at 1/2″
- Scroll down on the page to see a full product video!!
- Installation Instructions
- Made in the USA, in sunny California!!
(6 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesOn Sale All November!!All Pro Complete CV Boot Kit | Tundra 07-21 + Sequoia 08-22 + 200 Series 08-21
- Complete CV boot replacement kit – Suits Toyota Tundra 2007-2021, Toyota Sequoia 2008-2022, and Toyota Land Cruiser 200 Series 2008-2021
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(15 reviews) -
Tundra 2nd Gen (2007-2021)On Sale All November!!
Dobinsons C59-780 3″ Lift Coil Springs Tundra 4×4 2007-2021 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Sold in Pairs
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- Lifts 3″ with stock weight front end
- 662LBF/in spring rate, 432mm free height
(16 reviews)Original price was: $405.00.$344.25Current price is: $344.25. Select options This product has multiple variants. The options may be chosen on the product page -
Add-a-LeafOn Sale All November!!
Wheeler’s 1″ Lift Add-A-Leaf Set for 2007-21 Tundra
- Suits 2007-2021 Toyota Tundra
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 1.0″ of lift approximately. Different bed/cab configurations could see variations in lift height
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
(5 reviews)