Your cart is currently empty!
Search results: “long travel coils” – Page 4
Showing 91–120 of 151 results
-
80 Series Land Cruiser (1990-1997)
Dobinsons 6″ Lift Kit Builder | Toyota Land Cruiser 80 Series (inc All Shock Options)
- Kit requires additional parts for this lift height, see below
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match lift height and added weight
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Select Dobinsons Twin Tube, IMS or 3-way Adjustable MRA shocks from the list
- 3-way Adjustable MRA shocks you can adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Kit includes front and rear shocks and coils, steering damper, 5 degree castor kit, Front and Rear adjustable panhard rods for left hand drive, front sway bar extensions and rear proportioning valve extension – whatever you add to your cart. Nothing is included if you don’t select it
- Be sure to read each sub section clearly so you know what all is required to add this much lift to your vehicle.
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
From $2,510.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons Land Cruiser 80 Series Shocks ALL Options – Front and Rear
- This page shows all Dobinsons shock options for the 1990-1997 Toyota Land Cruiser 80 Series
- See the description below for information about the difference between the 3 different shock types
- Select the shock type you’d like that will also suit the amount of lift or travel that you are looking for
- Keep in mind that using an extended travel shock can always require additional parts, such as extended brake lines, bump stops, suitable coils, trailing arms, drive shafts, etc
- All shocks are sold in PAIRS, steering dampers are individual
- Order what you would like, but only order 1 set of front shocks and 1 set of rear shocks
- Shocks front and rear need to match – IMS front and rear, or twin tube front and rear, for example
- All shocks come with new bushings and any required hardware for installation (MRA shocks come with resi brackets)
- Any length shocks for more than 3″ lift require adequate bump stop spacing to prevent shock bottom-outs
- The extended and compressed lengths of each shock are listed in millimeters (mm), (extended/compressed)
- To see full details of each product, select it from the drop-down menu, then click the small square box that appears to the right to be taken to that product page for full details and shock specs
From $135 Select options -
Dobinsons
Dobinsons GS45-642 Front Struts for Nissan Xterra D40 Frontier R51 Pathfinder
- Suits Nissan Xterra (2005-2015), D40 Frontier and Navara, D23 Navara and R51 Pathfinder
- Suitable for stock height up to 2.0″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
$350.00 Add to cart -
Sidekick/Tracker 1988-1998
Dobinsons Lift Kit | Suzuki Sidekick + Geo Tracker 1988-1998
- Dobinsons Complete Suspension Lift Kit for the Suzuki Sidekick and Tracker LWB (Long Wheel Base) 1988-1997
- These lift 40mm (1.6″) Front and 30mm (1.2″) Rear, as they come, or you can add the coil spacers to gain extra lift height
- Take note that adding extra lift height to the front will result in reduces camber and it could be harder to get a proper wheel alignment without custom modifications to get a better alignment
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- GS57-620 struts are 501mm extended, 304mm compressed
- GS57-621 rear shocks are 505mm extended, 318mm compressed
From $1,200.00 Select options -
Sequoia 2nd Gen (2008-2022)
Dobinsons Stock Height Twin Tube Sequoia Suspension Kit for 2008-2022
- Suits Toyota Sequoia models from 2008 to 2022
- Complete suspension kit for on and Off Road Use, fine tuned to match the vehicle
- Coils are stock height replacements front and rear to freshen up the suspension back to where it was when new
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Does not suit rear air suspension equipped models
- If assembling the front struts yourself, remove the silver aluminum droop spacer from the assembly process, so that the coil stays captured in the mount properly
From $1,470.00 Select options -
SuspensionShips FREE !!
within 48 US StatesDobinsons 1.5″ to 3.5″ MRA Lift Kit Toyota FJ Cruiser 2010 to 2017
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
From $2,970.00 Select options -
FJ Cruiser Early (2006-2009)Ships FREE !!
within 48 US StatesDobinsons 1.5″ to 3.5″ MRA Lift Kit Toyota FJ Cruiser 2006 to 2009
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Dobinsons premium monotube remote reservoir struts and shocks with 3-way valving adjustment for the ultimate in ride quality and performance
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
From $2,970.00 Select options -
Full Suspension Kits - 200 SeriesShips FREE !!
within 48 US StatesDobinsons 1-2.5″ Pre-Assembled MRA Coilovers for Toyota Land Cruiser 200 Series
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 Models with 5.7L V8 Gas Engine
- Looking for a quick and easy way to lift your 200 Series? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- MRA59-A688 Travel – 606mm extended, 438mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 22mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
$1,925.00 Select options -
FJ Cruiser Early (2006-2009)
Dobinsons 1.5″ to 3.5″ Lift Kit Toyota FJ Cruiser 2006 to 2009 (all options)
- Suits 2006-2009 Toyota FJ Cruiser
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Every possible option is listed on this page in the drop downs below
From $1,200.00 Select options -
Suspension
Dobinsons 1.5″ to 3.5″ Lift Kit Toyota FJ Cruiser 2010 to 2017 (all options)
- For Late Model FJ Cruisers from 2010-2017
- Choose from Twin Tube, IMS Monotube, or 3-Way Adjustable MRA Struts and Shocks from the options below
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
From $1,200.00 Select options -
80 Series Land Cruiser (1990-1997)
Dobinsons 0-3.5″ Lift Kit Builder | Toyota Land Cruiser 80 Series (inc all shock options)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Choose from Twin Tube, IMS Monotube, or MRA 3-Way adjustable remote resi shocks
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, you can add any other parts you need
- Choose your coils and load carrying ability, anywhere from 0″ up to 3.5″ of Lift
From $1,160.00 Select options -
Sequoia 2nd Gen (2008-2022)
Dobinsons Sequoia Lift Kit 1.75″-2.5″ for 2008-2022 5.7L V8 (All Options)
- Suits 2008-2022 Toyota Sequoia 4×4 V8 models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Twin Tube or IMS Monotube struts and shocks (more details below in description)
- Does not suit rear air suspension equipped models
- 2.5″ rear lift height requires shock extensions with twin tube shocks for proper travel, add it in the drop-downs below
- Front IMS struts assembly instructions
From $1,470.00 Select options -
Dobinsons
Dobinsons Tundra 2.25-3.0″ Suspension Kit for 2007-2021 Double Cab 4×4 V8
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to provide comfort and lift
- Multiple coil colors available
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- NEW IMS struts and shocks now available – Adjustable height front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- Front IMS assembly instructions
From $1,775.00 Select options -
200 Series Land Cruiser (2008-2021)Ships FREE !!
within 48 US StatesDobinsons 200 Series Land Cruiser 1.0-2.5″ MRA Lift Kit
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Reservoir mounting instructions, it’s the same for KDSS and non-KDSS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
From $3,335.00 Select options -
Full Suspension Kits - 100 Series
Dobinsons 100 Series lift kit | Toyota Land Cruiser IFS DIESEL 1998-2007 (all shock options)
- Build a full suspension replacement here for your Toyota Land Cruiser 100 Series, with all possible options listed on this one page
- THIS PAGE IS FOR DIESEL ENGINE MODELS ONLY
- Lexus LX470 and Land Cruiser 100 Series share the same suspension parts
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A base kit includes 2 Front Shocks, Pair Front Torsion Bars, 2 Rear Shocks, and 2 Rear Coil Springs
- You can choose from twin tube, IMS Monotube or MRA 3-Way Adjustable Monotube shocks in the drop down menus
From $1,330.00 Select options -
Grand Vitara 2005-2015
Dobinsons Front Struts for Suzuki Grand Vitara 2005-2015
- Suits Suzuki Grand Vitara 8/2005 to 2015 models – JT Series
- Sold in Pairs
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- If also adding lifted coils, it’s recommended to buy the WA57-505K camber bolt kit to align the vehicle properly
- 620mm extended, 386mm compressed
$350.00 Add to cart -
80 Series Land Cruiser (1990-1997)Ships FREE !!
within 48 US StatesTimbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Rear End
- Overall kit height = 8.25”
- Total deflected (compressed) height = 6”
- Amount of deflection (compression) = 2.25”
- NOTE: Bolts into the frame. Adding nutserts may be required depending on frame condition
- Oversized coils and wide tires without much offset could possibly contact the bump stops
- Clearancing of the bracket and the bump stop cup may be required on some long travel setups to avoid clearance issues with the coil springs
- Click here for instructions
$269.36 Add to cart -
Trooper
Dobinsons Isuzu Trooper (Acura SLX) Suspension Kit for 1992 to 2002
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Front Torsion Bars, 2 Rear Shocks, and 2 Rear Coil Springs
- Suits 1992-2000 and 2001-2002 models, with a change in rear coils
- NOTE: Since these vehicles are more rare, some products may have a 1-2 month lead time. Email us in advance for an ETA prior to ordering if you’re concerned about timing
From $1,420.00 Select options -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons 100 Series Lift Kit | Toyota Land Cruiser IFS V8 Gas 1998-2007 (all options)
- Build a full suspension replacement here for your Toyota Land Cruiser 100 Series, with all possible options listed on this one page
- Lexus LX470 and Land Cruiser 100 Series share the same suspension parts
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A base kit includes 2 Front Shocks, 2 Front Torsion Bars, 2 Rear Shocks, and 2 Rear Coil Springs
- You can choose from twin tube, IMS Monotube or MRA 3-Way Adjustable Monotube shocks in the drop down menus
- If you have a diesel engine, you need to use this other kit page instead
From $1,330.00 Select options -
GX470 (2002-2009)
Dobinsons 1″ to 3.5″ IMS Lift Kit for Lexus GX470
- Full Dobinsons IMS Suspension kit for Lexus GX470 from 2003 to 2009, with every possible option listed on one page
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Standard Coil Springs
- Select the struts and shocks you want as well as all possible add-ons down below
- See note below in description about KDSS models
From $1,770.00 Select options -
Dobinsons
2-2.5″ Lift Kit Builder for Toyota Tundra 2000-2006
- Now you can build your own suspension kit with everything from Exit Offroad
- This page is for the 2000 to 2006 Toyota Tundra 4×4 with V8 Engine
- Use adjustable height IMS struts to go from 2″ to 2.5″ of front lift
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose what you’d like to add and build the price auto-adjusts
- You can add or remove whichever items you would like
From $1,095.00 Select options -
Dobinsons
Dobinsons Rear Shocks | Suzuki Sidekick Vitara XL7 Grand Vitara
- Suits these vehicles: Suzuki Sidekick 1988-1998, Suzuki Escudo 1988-1998, Geo Tracker 1988-1998, Suzuki Grand Vitara 1998-2005, Suzuki Escudo 1998-2005, Suzuki XL7 2001-2005
- Sold in Pairs
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- 505mm extended, 318mm compressed
$310.00 Add to cart -
4Runner 3rd Gen (1996-2002)
Dobinsons GS59-225 Rear Shocks for 2nd/3rd Gen 4Runner 1990-2002
- Suits 2nd Gen 4Runner 1990-1995 (with coil spring rear end), and 3rd Gen 4Runner 1996-2002 (with coil spring rear end)
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-225 Specifications: 530mm extended, 330mm compressed, 60mm body size
- Sold in Pairs
$310.00 Add to cart -
4Runner 3rd Gen (1996-2002)
Dobinsons 2-2.5″ Lift Kit for Toyota 4Runner 1996 to 2002 3rd Gen
- Suits 3rd Gen 4Runner 1996-2002 4×4 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Teal, Red or Black coils in the selections below
From $1,200.00 Select options -
Grand Vitara 2005-2015
Dobinsons Rear Shocks for Suzuki Grand Vitara 2005-2015
- Suits Suzuki Grand Vitara 8/2005 to 2015 models – JT Series
- Sold in Pairs
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for long life and great vibration dampening
- 540mm extended, 353mm compressed
$310.00 Add to cart -
Dobinsons
Dobinsons Front Struts for Suzuki Sidekick Vitara XL7 Grand Vitara
- Suits these vehicles: Suzuki Sidekick 1988-1998, Suzuki Escudo 1988-1998, Geo Tracker 1988-1998, Suzuki Grand Vitara 1998-2005, Suzuki Escudo 1998-2005, Suzuki XL7 2001-2005
- Sold in Pairs
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- If also adding lifted coils, it’s recommended to buy the WA57-505K camber bolt kit to align the vehicle properly
- 501mm extended, 304mm compressed
$350.00 Add to cart -
70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 - 87-96
Dobinsons 1.75″-2.5″ Lift Kit for Toyota Land Cruiser LJ78 LJ79 RJ77 KZJ78 1987-96 Square Headlights
- For 1987-1996 Toyota 70 Series 5-door models, LJ78, LJ79, RJ77, KZJ78 with Square Headlights and 2.4L petrol or 2.4L diesel engines
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, choose optional parts below
- Choose your coils and load carrying ability, anywhere from 1.75″ up to 2.5″ of Lift
From $1,160.00 Select options -
4Runner 4th Gen (2003-2009)Ships FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
$650.00 Add to cart -
Expedition 2008-2017 119in Wheelbase
Dobinsons Rear Struts for Ford Expedition 119″ WB 2008-2017
- Suits the rear of Ford Expedition 119″ wheelbase, from 2008-2017
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs, one for the left side and one for the right side
- Stocked here in the USA
- Photo for illustration purposes only
$350.00 Add to cart -
Suspension
Dobinsons 1.5″ to 3.5″ IMS Lift Kit Toyota FJ Cruiser 2010 to 2017
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 Year Replacement Warranty
- Front IMS height adjustment instructions
From $1,770.00 Select options