You may be interested in…
-
Excluded
Dobinsons Pickup Rear Drawers Kit with Fridge Slide Universal Fit
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
- You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
From $1,845.00 Select options -
Full Suspension Kits - Tundra 3rd GenShips FREE !!
within 48 US StatesDobinsons 2-3″ IMS Suspension Kit | 2022+ Toyota Tundra
- Dobinsons IMS suspension kit for your 2022-2023+ Tundra
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Hybrid Models lift 1-1.5″ less lift than listed here
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Installation Note: Transfer over the rear OEM coil isolators from the stock coils to these to prevent coil slap
- If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- **Not compatible with factory rear airbag suspension
- Standard Coil seat height for IMS59-60446 should be set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
From $1,980.00 Select options -
RecoveryShips FREE !!
within 48 US StatesDobinsons 12V Electric Winch – 12000 LBS with Synthetic Rope
- 12,000 Capacity
- 6.5HP Series Wound Motor
- 216:1 Gear Reduction
- 57 LBS Weight
- 10×4.5″ Mounting Pattern
- 6.3 x 8.3 x 21.5″ Overall Dimensions
- 64 x 224mm Drum, Automatic Braking Action
- 3 Stage Planetary Gears
- Plug in Control Range of 10 FT
- Includes Various Control Box Mounting Brackets: Control Box to Cross Rods, Motor Housing & Flat Surface/Bumper Tops
- Sealed Solenoid Box, More Powerful
- Easy Quick Flop Clutch
- Improved Casings
- Motor Housing Breather
- Includes 100FT Synthetic Rope with Hook, Aluminum Hawse Fairlead, Hand Held Control and Wireless Remote (30ft Range)
$1,245.00 Add to cart -
Bump Stops
Wheeler’s Rear Superbumps for 95+ Tacoma and 99-06 Tundra
- Suits the following vehicles: 1995-2023 Tacoma and 1999-2006 Toyota Tundra
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), goes under the factory u-bolts
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Installation Instructions
$221.00 Add to cart -
Tacoma 3rd Gen (2016-2023)
Dobinsons Tacoma L59-111-R Leaf Springs Pair for 2005 to 2023 (500-800LBS)
- Lifts Dual Cab Short Beds (DCSB) 2.25″ with 500-800LBS of added weight (more weight=less lift)
- Lifts Access Cab Long Beds (ACLB) 2-2.25″ with 0-200LBS of added weight
- Sold in pairs
- Each pack has 6 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- 3rd leaf down from the top can be removed to reduce spring rate, making springs medium load
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
$730.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesWarn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 5 Spoke
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Steering - Jeep JKShips FREE !!
within 48 US StatesRusty’s HD Tie Rod Assembly | JK Wrangler
- Fits: 2007-2018 Jeep Wrangler JK Models
- A tie rod makes the connection between both wheels at the knuckles, sets toe angle
- Massive 1.75″ x 0.250-wall DOM tubing Tie Rod
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- Machined hexed ends for easy adjustment
- Zinc Plated tie rod ends for protection and long life
- HD jam nuts
- Serrated Lock Washers
- The strongest JK Tie Rod you can buy
- Built in Rainbow City, Alabama, USA
- Also made in a aluminum version
$427.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
- 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMITM CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
- EDP Surface Protection, Direct Bolt-On Design
- Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
- 14.2″ compressed length, 24.2″ extended length
- Installation Instructions
- Works with factory brake line length and OE bump stop length, no extensions required
- Includes reservoir brackets and hardware
- SOLD IN PAIRS
$1,150.00 Add to cart -
Exceptions
Dobinsons Rear Dual Roller Drawer Kit – 36 x 40 x 10 inches
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide on left side
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Universal Mount, measures 36″ Long x 40″ Wide x 10″ High, requires drilling
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
$1,465.00 Select options -
Rusty's Off RoadShips FREE !!
within 48 US StatesRusty’s Adjustable Front Track Bar | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings on one end and a heim on the other
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
$215.00 Add to cart -
Tacoma 3rd Gen (2016-2023)
Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 2005-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
$90.00 Add to cart -
Excluded
Dobinsons Single Drawer – Universal Mount – Large Size
- Measures 990mm long x 535mm wide x 275mm high, 80 LBS dry weight
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- 4 x Heavy Duty Stainless Steel Tie Down Points
- Aluminum Edging Protection, Heavy duty lockable latch
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
- Regular Ground shipping isn’t available due to potential product damage
$800.00 Select options -
Steering UpgradesShips FREE !!
within 48 US StatesRusty’s Front Track Bar Mount Brace | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- This is a brace that supports the mount between the steering box and the track bar bracket
- Constructed of 1/4-inch thick laser-cut steel
- CNC formed for an exact fit
- E-coated in black for durability and looks
- Includes Grade 8 hardware
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
$146.00 Select options -
Dobinsons
Dobinsons Strut Top Plates Pair | Tacoma 05-23 4Runner 03-24 FJ Cruiser GX470 GX460
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
$120.00 Add to cart -
WarnShips FREE !!
within 48 US StatesWARN 101445 Optional Skid Plate for Elite Bumpers JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models) WITH a Warn Elite Bumper
- Lower Bumper Skid Cover Protects Critical Components Such As Sway bar Disconnects
- Meets The Highest Quality Standards
- Built To Match Your Exact Requirements
- Easy To Install
- Limited 1 Year Warranty
Attributes
- Location: Under Bumper Mount
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Logo: Warn Logo
- Installation Type: Bolt-On
- Includes Hardware: Yes
- Drilling Required: No
- Estimated Install Time (Hours): 0.5
$265.00 Add to cart -
Suspension
Dobinsons GS59-713 Pair of Rear Shocks | Toyota Sequoia 2008-2022
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
- Dobinsons GS59-713 Specifications: 471mm extended, 315mm compressed
- Add this kit when buying these shocks if you will be using these for 2.5″of lift
$310.00 Add to cart -
WheelsShips FREE !!
within 48 US StatesWarn 106687 Diamond Cutter Wheel – 17×8.5″ 5×5 0″ Offset – Black
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Black Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Black
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 5 Spoke
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Rear Drawers
Dobinsons Rear Dual Roller Drawer Kit – 39 x 42 x 10 inches
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Universal Mount, measures 39 x 42 x 10 inches (L, W, H)
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
- Photos for illustration purposes and may not be actual size of product for this product page
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
$1,465.00 Select options -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A684 3-Way Adjustable MRA Front Shocks | 80 Series 6″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 728mm extended, 432mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart -
Shocks - 80 Series Land CruiserShips FREE !!
within 48 US StatesDobinsons IMS59-60681 Rear IMS 2.6″ Shocks | 80 Series – 31″ Extended
- 31″ long 2.6″ body shocks for the rear of a Toyota Land Cruiser 80 Series
- For custom use, extreme rear long travel shocks, longer than the Dobinsons 6″ lift shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 790mm (31.1″) extended, 480mm (18.9″) compressed
- Bump stop extensions are required to prevent bottom outs, depending how you mount the shocks
- Photo for illustration purposes
$650.00 Add to cart -
Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
$105.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60684 Front IMS Shocks | Land Cruiser 80 Series (6″ lift)
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 728mm extended, 432mm compressed
$650.00 Add to cart -
Accessories
Dobinsons Single Drawer – Universal Mount – Medium Size
- Measures 900mm long x 500mm wide x 275mm high, 75 LBS dry weight
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- 4 x Heavy Duty Stainless Steel Tie Down Points
- Aluminum Edging Protection, Heavy duty lockable latch
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address. Ground shipping isn’t available due to potential product damage
$800.00 Select options -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
Recovery
MAXTRAX MKII Mounting Pins (17mm bolts)
- Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
- 17mm bolt length, see attached photo for description
- 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
- Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
- M10 stainless bolt has a provision for a small padlock
- Please Note: Antiseize recommended on install
- SOLD AS A SET OF FOUR
$65.99 Add to cart -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
$60.00 Add to cart -
Dobinsons
Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-75)
- Used in place of original leaf bolt when adding a leaf
- Fits L59-111-R-R3 & L59-112-R-R5 ONLY
- Sold individually
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Requires lifted leaf springs to ensure proper fitment
$5.00 Add to cart -
Recovery
MAXTRAX Flat Rack Mounts with T-Bolts
- Mount up to 4 Maxtrax (2 Pairs) with this kit, includes mounts, hardware and pins for the Maxtrax
- Designed to mount to your MAXTRAX to your vehicles roof platform or roof rack crossbars
- Can securely attach up to four MAXTRAX MKII (MTXMPS17), 4 MAXTRAX XTREME (MTXXMPS17), or a pair of each (MTXMPSX17)
- Provides 180mm of closer adjustment or 180mm of further apart adjustment from the mounting point of the Flat Racks
- Includes the mounting option of 4 x T-Bolts (Suitable for Rola Titan roof platform, roof platforms and roof rack crossbars from most popular Roof Rack Brands)
- SOLD IN PAIRS
$149.99 Add to cart -
Front Bumpers
WARN 101330 Elite Series Stubby Front Winch Bumper for JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned To Deliver Maximum Airflow To The Engine Bay
- Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
- Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: Yes
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Rings
- With Light Cutouts: No
- Light Type: No Lights
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: No
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
$999.99 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
$650.00 Add to cart -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-110-R leaf pack Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-110-R to L59-111-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
$140.00 Add to cart -
Rear BumpersShips FREE !!
within 48 US StatesWarn 102255 Elite Series Rear Tire Carrier for JL Wrangler
- Suits Jeep Wrangler JL 2018-2023 (all models)
- Tire Carrier ONLY
- Requires the Elite Rear Bumper 102190 to run this tire carrier
- Holds Up To A True 40 Inch Tire
- JL Tire Carrier Add On To The Elite Rear Bumper For Jeep JL
- Built To Match Your Exact Requirements
- Easy To Install
- Limited 1 Year Warranty
- THIS IS A SPECIAL ORDER ITEM
- INSTALLATION INSTRUCTIONS
$1,479.99 Add to cart
Cart totals
Subtotal | $59,333.85 |
---|---|
Shipping |
Shipping to FL. |
Tax | $4,450.14 |
Total | $66,154.99 |